登录注册
微信扫码登录
OP230 壳蜗合成台，将蜗杆总成装入壳体，将锁紧螺母拧紧，锁紧螺母铆点，壳体压钢球（ID:502163）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | -r4-10-12-101-10_gebogen.iam | 87.5 KB |
| 3 | 003-11-0003_U-Scheibe_M3.ipt | 91 KB |
| 4 | 0129311500.ipt | 111 KB |
| 5 | 0211196543.ipt | 102 KB |
| 6 | 0211196551.ipt | 103 KB |
| 7 | 0219110024.ipt | 128 KB |
| 8 | 0603 SMD Capacitor_CAPC1608X85N.ipt | 215 KB |
| 9 | 0603 SMD Resistor.ipt | 308 KB |
| 10 | 0805 SMD Resistor.ipt | 508 KB |
| 11 | 1.ipt | 113 KB |
| 12 | 1.ipt | 144 KB |
| 13 | 1.ipt | 147 KB |
| 14 | 1.ipt | 149 KB |
| 15 | 1.ipt | 149 KB |
| 16 | 1.ipt | 195 KB |
| 17 | 1.ipt | 423 KB |
| 18 | 1.ipt | 528 KB |
| 19 | 1.ipt | 83.5 KB |
| 20 | 1000737.ipt | 520 KB |
| 21 | 1001032.ipt | 100 KB |
| 22 | 1001083.ipt | 95.5 KB |
| 23 | 1001447.ipt | 105 KB |
| 24 | 1001480_Hülsenschraube.ipt | 106 KB |
| 25 | 1001558.ipt | 127 KB |
| 26 | 1001587.ipt | 108 KB |
| 27 | 1001644.ipt | 131 KB |
| 28 | 1001814.ipt | 103 KB |
| 29 | 1001920.ipt | 191 KB |
| 30 | 1001942 BT Gehäuse Rückwand-Scharniere Rittal.iam | 74.5 KB |
| 31 | 1051830_ASCF_M_23_C_DM_4_0_5_6.ipt | 206 KB |
| 32 | 1051830_ASCF_M_23_C_DM_4_0_5_6.ipt | 215 KB |
| 33 | 1247168_ASCF_M_23_S_DM_2_1_3_4.ipt | 199 KB |
| 34 | 127312_LFR_D_7_MIDI___0_.ipt | 914 KB |
| 35 | 130896_QSM-B-M5-6-20.ipt | 213 KB |
| 36 | 130901_QSML-B-M5-6-20.ipt | 263 KB |
| 37 | 144870.ipt | 1.93 MB |
| 38 | 151521_ESK_1_4_1_4.ipt | 192 KB |
| 39 | 151522_ESK_3_8_3_8.ipt | 202 KB |
| 40 | 151688_KMEB_1_24_2_5_LED.iam | 70.5 KB |
| 41 | 151688_KMEB_1_24_2_5_LED____part_.ipt | 328 KB |
| 42 | 153003_QS_1_4_6.ipt | 191 KB |
| 43 | 153132_QST-12.ipt | 341 KB |
| 44 | 153149_QSY-6.ipt | 388 KB |
| 45 | 153154_QSY-8-6.ipt | 381 KB |
| 46 | 158514_DMM-16-20-P-A.iam | 99 KB |
| 47 | 159502_LRP_1_4_10____0_.iam | 80.5 KB |
| 48 | 159502_LRP_1_4_10____0_g_.ipt | 490 KB |
| 49 | 159503_HR_1_4_P.ipt | 133 KB |
| 50 | 159593_HFOE_D_MIDI_MAXI.iam | 74.5 KB |
| 51 | 159593_HFOE_D_MIDI_MAXI_P1.ipt | 140 KB |
| 52 | 159595_FRB_D_MIDI.iam | 64 KB |
| 53 | 16006ZZ.31.ipt | 199 KB |
| 54 | 161419_UC-1_8.ipt | 131 KB |
| 55 | 162809_HE_3_8_D_MIDI.iam | 79 KB |
| 56 | 163302_DNC-32-450-P-A.iam | 97.5 KB |
| 57 | 171157_MSSD_C4P.ipt | 262 KB |
| 58 | 172941_HEE_3_8_D_MIDI_24.iam | 77 KB |
| 59 | 175096_SMBR_8_25.ipt | 271 KB |
| 60 | 175250_PEV_1_4_B_OD.ipt | 543 KB |
| 61 | 186104_QS-G1_2-12.ipt | 204 KB |
| 62 | 186107_QS-G1_8-6-I.ipt | 186 KB |
| 63 | 186109_QS-G1_8-8-I.ipt | 183 KB |
| 64 | 186110_QS-G1_4-8-I.ipt | 187 KB |
| 65 | 186117_QSL_G1_8_6.ipt | 203 KB |
| 66 | 186119_QSL-G1_8-8.ipt | 214 KB |
| 67 | 186123_QSL-G3_8-10.ipt | 215 KB |
| 68 | 186124_QSL_G3_8_12.ipt | 243 KB |
| 69 | 186125_QSL-G1_2-12.ipt | 219 KB |
| 70 | 186351_QSL-G1_4-12.ipt | 212 KB |
| 71 | 192159_CRVZS_5.ipt | 314 KB |
| 72 | 19223_DSNU_25_100_P_A____0_.iam | 153 KB |
| 73 | 19223_DSNU_25_100_P____A___00__0_KS_.ipt | 136 KB |
| 74 | 19223_DSNU_25_100_P____A____0_ZR_.ipt | 284 KB |
| 75 | 192594_LFR_3_8_D_7_O_MIDI____0_.iam | 84 KB |
| 76 | 193139_GRLA-M5-QS-6-D.ipt | 219 KB |
| 77 | 193139_GRLA_M5_QS_6_D.ipt | 234 KB |
| 78 | 193144_GRLA_1_8_QS_6_D.ipt | 241 KB |
| 79 | 193145_GRLA-1_8-QS-8-D.ipt | 224 KB |
| 80 | 193150_GRLA-3_8-QS-8-D.ipt | 210 KB |
| 81 | 193155_GRLZ-M5-QS-6-D.ipt | 245 KB |
| 82 | 193155_GRLZ_M5_QS_6_D.ipt | 263 KB |
| 83 | 193969_GR-QS-6.ipt | 313 KB |
| 84 | 195496_GR_H_QS_6_8.ipt | 163 KB |
| 85 | 197633_D-1_4i-1_2A.ipt | 163 KB |
| 86 | 197634_D_1_2i_1A.iam | 77.5 KB |
| 87 | 197634_D_1_2i_1A____part_.ipt | 161 KB |
| 88 | 1_1.ipt | 112 KB |
| 89 | 2.ipt | 103 KB |
| 90 | 2.ipt | 104 KB |
| 91 | 2.ipt | 105 KB |
| 92 | 2.ipt | 156 KB |
| 93 | 2.ipt | 194 KB |
| 94 | 2.ipt | 279 KB |
| 95 | 2.ipt | 280 KB |
| 96 | 2.ipt | 281 KB |
| 97 | 2.ipt | 595 KB |
| 98 | 2062_FK-M8.iam | 98.5 KB |
| 99 | 2062_FK_M8____0BO_.ipt | 146 KB |
| 100 | 2062_FK_M8____BU_.ipt | 152 KB |
| 101 | 2062_FK_M8____GE_.ipt | 171 KB |
| 102 | 2062_FK_M8____KG_.ipt | 109 KB |
| 103 | 2062_FK_M8____MU_.ipt | 145 KB |
| 104 | 2062_FK_M8____asm_0_0_.iam | 81.5 KB |
| 105 | 210893_O_1.ipt | 91.5 KB |
| 106 | 2316_U_1_4.ipt | 537 KB |
| 107 | 248329.ipt | 244 KB |
| 108 | 248330.ipt | 163 KB |
| 109 | 248331.ipt | 92 KB |
| 110 | 2_1.ipt | 112 KB |
| 111 | 3.ipt | 106 KB |
| 112 | 3.ipt | 218 KB |
| 113 | 3.ipt | 220 KB |
| 114 | 3.ipt | 221 KB |
| 115 | 3.ipt | 96 KB |
| 116 | 3.ipt | 96.5 KB |
| 117 | 3.ipt | 97.5 KB |
| 118 | 3000001 ME Haltefeder DeLock Wechselrahmen.ipt | 162 KB |
| 119 | 3000047 MaBo.EPIC.NANO-KBN-i1-4201-R10.iam | 84 KB |
| 120 | 3000095 ME.Frae.Kuehladapterplatte.NANO-KBN-i1.ipt | 726 KB |
| 121 | 3000112 V1.1.iam | 77 KB |
| 122 | 3000114 BT.LP.AKIP.NANO KBN-i1.iam | 96.5 KB |
| 123 | 3000117 BG.LP.COM Interface.NANO KBN-i1.ipt | 339 KB |
| 124 | 3000123 BG.LP.DIP.NANO KBN-i1.ipt | 205 KB |
| 125 | 3000165 KA.Konf.RS232.NANO KBN-i1.Touch.ipt | 279 KB |
| 126 | 3000195 BG.LP.USB Int.WLAN.NANO KBN-i1.ipt | 241 KB |
| 127 | 3000200 V1.0.iam | 73 KB |
| 128 | 3000349 Anschlusskonsole_für_VESA_100_.iam | 81 KB |
| 129 | 3000435 ME Frontplatte HLT15xx schwarz eloxiert.ipt | 688 KB |
| 130 | 3000462 EL.15 Zoll Admetro Touch Halterahmen.ipt | 381 KB |
| 131 | 3000462 EL.15 Zoll Admetro Touch mit Halterahmen.iam | 73.5 KB |
| 132 | 3000470 ME.RFID Montageplatte Kartenhalter.ipt | 399 KB |
| 133 | 3000471 ME.RW.15Zoll.SBC.WLAN.ipt | 625 KB |
| 134 | 3000474 Displayabdeckblech Frontplatte 15 Zoll.ipt | 237 KB |
| 135 | 3000654 BT Schließbolzen Schnappverschluss.ipt | 98.5 KB |
| 136 | 3000691 BT Isolierfolie AKIP.ipt | 114 KB |
| 137 | 32682_DPZ-10-25-P-A.iam | 104 KB |
| 138 | 33101-000571-RS.ipt | 213 KB |
| 139 | 33101-000929-HF_18P_USB3.0.ipt | 877 KB |
| 140 | 351358_FRB_D_MIDI.ipt | 110 KB |
| 141 | 3568_B_1_8.ipt | 138 KB |
| 142 | 360721_HE_MIDI.ipt | 709 KB |
| 143 | 369989_LF_D_MIDI.ipt | 106 KB |
| 144 | 373845_LR_MINI.ipt | 120 KB |
| 145 | 373846_LR_MIDI.ipt | 123 KB |
| 146 | 380297_PBL_3_8_D_MIDI_L____1__p1.ipt | 214 KB |
| 147 | 380299_PBL_3_8_D_MIDI_R____0__p1.ipt | 197 KB |
| 148 | 398011_LRVS_D_MINI_M36x1_5.ipt | 126 KB |
| 149 | 398012_LRVS_D_MINI.ipt | 122 KB |
| 150 | 400底盘1.ipt | 97 KB |
| 151 | 400振盘带直线示意1.iam | 77.5 KB |
| 152 | 400顶盘1.ipt | 415 KB |
| 153 | 4150175706.ipt | 625 KB |
| 154 | 4150198401.ipt | 4.55 MB |
| 155 | 4181000(0.5CC-10CC).ipt | 196 KB |
| 156 | 4222036301_SW.ipt | 1.86 MB |
| 157 | 4222097700.ipt | 15 MB |
| 158 | 4222097780_ASM.iam | 71 KB |
| 159 | 4222097900.ipt | 8.98 MB |
| 160 | 4222097980_ASM.iam | 73.5 KB |
| 161 | 4222098100.ipt | 6.54 MB |
| 162 | 4222098180_ASM.iam | 75 KB |
| 163 | 4222098200.ipt | 5.98 MB |
| 164 | 4222098280_ASM.iam | 75 KB |
| 165 | 4222098285_ASM.iam | 76 KB |
| 166 | 4222099500.ipt | 141 KB |
| 167 | 4222099501.ipt | 162 KB |
| 168 | 4222099502.ipt | 123 KB |
| 169 | 4222099600.ipt | 122 KB |
| 170 | 4222101080.ipt | 1.44 MB |
| 171 | 4222114480.iam | 133 KB |
| 172 | 4222116400.ipt | 103 KB |
| 173 | 431-01___.ipt | 862 KB |
| 174 | 431-02___.ipt | 583 KB |
| 175 | 431-03___.ipt | 122 KB |
| 176 | 431-04___.ipt | 2.23 MB |
| 177 | 431-05___.ipt | 102 KB |
| 178 | 431-06___.ipt | 121 KB |
| 179 | 5002697_Befestigungsblech Schnappverschluss.ipt | 431 KB |
| 180 | 5002698 BG_2fach Wechselrahmen DELOCK 47189.ipt | 205 KB |
| 181 | 5004060_Rahmen_Rittal.iam | 71.5 KB |
| 182 | 5005066 ME_Montagewinkel Schließbolzen.ipt | 122 KB |
| 183 | 5005164 Lochstopfen Polyethylen-Niederdruck.ipt | 106 KB |
| 184 | 5005179_Gasfederhalter_Frontplatte.ipt | 408 KB |
| 185 | 5005990 KLT Kabelschelle 5PA-sw.ipt | 124 KB |
| 186 | 5006650 BT Display 15Zoll Touch resistiv.ipt | 85.5 KB |
| 187 | 5010215 ME Abstandshalterkamm.ipt | 103 KB |
| 188 | 5010223 KA_LED-Beleuchtung CHI MEI G150XGE-L04.ipt | 288 KB |
| 189 | 5026570 Verbindung LVDS-Signale 15 Zoll Display.ipt | 119 KB |
| 190 | 5050654.ipt | 125 KB |
| 191 | 5069252 Gap-Pad 2200SF 0,5mm dick Stand.tafel.ipt | 85.5 KB |
| 192 | 5070245 ME Isolierfolie für Netzteil BEO1000.ipt | 128 KB |
| 193 | 5070246 ME Satz Isolierfolie_2.ipt | 90 KB |
| 194 | 525725_MA_40_10_R1_8_E_RG.ipt | 128 KB |
| 195 | 525729_MA_50_16_R1_4_E_RG.ipt | 128 KB |
| 196 | 536233_ADN_130_P_A__KS_.ipt | 138 KB |
| 197 | 536233_ADN_130_P____Z_.ipt | 676 KB |
| 198 | 536233_ADN_20_130_A_P_A____0_.iam | 79 KB |
| 199 | 536233_ADN_50_P_A__KS_.ipt | 148 KB |
| 200 | 536233_ADN_50_P____Z_.ipt | 688 KB |
| 201 | 536241_ADN_20_50_A_P_A____asm_0_.iam | 75 KB |
| 202 | 536250_ADN_40_P_A__KS_.ipt | 143 KB |
| 203 | 536250_ADN_40_P____Z_.ipt | 739 KB |
| 204 | 536253_ADN-25-15-A-P-A.iam | 97 KB |
| 205 | 536257_ADN_25_40_A_P_A____asm_0_.iam | 75.5 KB |
| 206 | 536267_ADN_120_P_A__KS_.ipt | 140 KB |
| 207 | 536267_ADN_120_P____Z_.ipt | 794 KB |
| 208 | 536267_ADN_32_120_A_P_A____0_.iam | 83.5 KB |
| 209 | 539105_32E-MPM+E_32P-SCD-R-M5B-3GEGGJJLL.ipt | 4.34 MB |
| 210 | 539105_32E-MPM+E_32P-SCD-R-M5B-GGEEGGPBTGPBTGGE.ipt | 5.56 MB |
| 211 | 541334_NEBU_M8G3_K_5_LE3.iam | 71.5 KB |
| 212 | 541334_NEBU_M8G3_K_5_LE3____D3M83G0_.ipt | 227 KB |
| 213 | 542185_FRM_Y_D_MIDI.iam | 79.5 KB |
| 214 | 547860_SMT_8G_PS_24V_E_0_3Q_M8D.iam | 71 KB |
| 215 | 547860_SMT_8G_PS_24V_E_0_3Q_M8D_G.ipt | 274 KB |
| 216 | 560219_HGPT-40-A-B-F.iam | 122 KB |
| 217 | 564212_VUVG-L14-P53C-T-G18-1K9L_----L_.ipt | 1.34 MB |
| 218 | 574333_SMT_8M_A_1___M8D____part_.ipt | 271 KB |
| 219 | 574334_SMT_8M_A_PS_24V_E_0_3_M8D.iam | 71.5 KB |
| 220 | 6140_FK-M10x1.25.ipt | 376 KB |
| 221 | 6140_FK_M10x1_25____0BO_.ipt | 142 KB |
| 222 | 6140_FK_M10x1_25____BU_.ipt | 148 KB |
| 223 | 6140_FK_M10x1_25____GE_.ipt | 162 KB |
| 224 | 6140_FK_M10x1_25____KG_.ipt | 102 KB |
| 225 | 6140_FK_M10x1_25____MU_.ipt | 133 KB |
| 226 | 6140_FK_M10x1_25____asm_0_0_.iam | 82 KB |
| 227 | 6205ZZ.ipt | 216 KB |
| 228 | 6206_480_01.ipt | 455 KB |
| 229 | 6206_480_02.ipt | 152 KB |
| 230 | 6206_480_03.ipt | 270 KB |
| 231 | 6206_480_04.ipt | 391 KB |
| 232 | 648415_LF.ipt | 260 KB |
| 233 | 675562_LRP_1_4.ipt | 156 KB |
| 234 | 676226_LRP_1_4.ipt | 176 KB |
| 235 | 6902ZZ.14.ipt | 147 KB |
| 236 | 6902ZZ.ipt | 149 KB |
| 237 | 712576_MSEBB_3_24V_D.ipt | 181 KB |
| 238 | 724702_FRM_____D_MIDI.ipt | 287 KB |
| 239 | 746237_HEE_D_MDI_24.ipt | 668 KB |
| 240 | 800宽装配台底座-3.iam | 302 KB |
| 241 | 800宽铝型材框（装配台）-4.iam | 1.13 MB |
| 242 | 8030218_NPFC_L_R38_G38_MF.ipt | 219 KB |
| 243 | 8434230000-1.iam | 388 KB |
| 244 | 8435566000.ipt | 18.5 MB |
| 245 | 8435603010.iam | 102 KB |
| 246 | A-36145 外形图 SEA802-xxx.ipt | 1.32 MB |
| 247 | A22NL_BG[]_T[]A_G102_[][].iam | 96 KB |
| 248 | A22NL_BG[]_T[]A_G102_[][]_TERMINAL.iam | 79 KB |
| 249 | A22NS_3M[]_N[]A_G112_NN.iam | 95 KB |
| 250 | A22NS_3M[]_N[]A_G112_NN_TERMINAL.iam | 78.5 KB |
| 251 | A22NZ_3M[]_N[]A.iam | 74 KB |
| 252 | A22NZ_3M[]_N[]A_BASE.ipt | 158 KB |
| 253 | A22NZ_3M[]_N[]A_NUT.ipt | 169 KB |
| 254 | A22NZ_BG[]_T[]A.iam | 74 KB |
| 255 | A22NZ_BG[]_T[]A_BASE.ipt | 150 KB |
| 256 | A22NZ_BG[]_T[]A_NUT.ipt | 170 KB |
| 257 | A22NZ_H_01.ipt | 221 KB |
| 258 | A22NZ_H_01.ipt | 221 KB |
| 259 | A22NZ_H_01_LEVER.ipt | 105 KB |
| 260 | A22NZ_H_01_LEVER.ipt | 105 KB |
| 261 | A22NZ_S_G1A.ipt | 225 KB |
| 262 | A22NZ_S_G1A.ipt | 226 KB |
| 263 | A22NZ_S_G1B.ipt | 225 KB |
| 264 | A22NZ_S_G1B.ipt | 227 KB |
| 265 | A22NZ_T_[].ipt | 246 KB |
| 266 | ANSI (in).dwg | 154 KB |
| 267 | ANSI (in).idw | 159 KB |
| 268 | ANSI (mm).dwg | 152 KB |
| 269 | ANSI (mm).idw | 158 KB |
| 270 | ANSI B18.16.3M - Festigkeitsklasse 5 und 10 - Metrisch M6 x 1 Nichtmetallisch.ipt | 127 KB |
| 271 | ANSI B18.16.3M - Festigkeitsklasse 5 und 10 - Metrisch M8 x 1.25 Metallisch.ipt | 128 KB |
| 272 | ANSI B18.3.1M - M6x1 x 10(1).ipt | 124 KB |
| 273 | ANT015.ipt | 102 KB |
| 274 | ANTTWN4_1356.ipt | 206 KB |
| 275 | AS 1421 - M4 x 16 Kegelstumpf.ipt | 104 KB |
| 276 | AS 1427 - M2,5 x 8(5) II.ipt | 165 KB |
| 277 | AS 1427 - M3 x 5(3).ipt | 129 KB |
| 278 | AS 1427 - M3 x 5(5) II.ipt | 171 KB |
| 279 | AS 1427 - M3 x 6(5) I.ipt | 159 KB |
| 280 | AS 1427 - M3 x 6(5) II.ipt | 170 KB |
| 281 | AS 1427 - M3 x 8(5) II.ipt | 166 KB |
| 282 | AS 1427 - M4 x 10(6) II.ipt | 187 KB |
| 283 | AS 1427 - M4 x 8(5) II.ipt | 175 KB |
| 284 | AS 1427 - M5 x 8(5) I.ipt | 159 KB |
| 285 | AS 1427 - M5 x 8(5) II.ipt | 178 KB |
| 286 | AS 1474 - M10(1).ipt | 97.5 KB |
| 287 | AS 1474 - M3(1).ipt | 97.5 KB |
| 288 | AS 1474 - M4(1).ipt | 98.5 KB |
| 289 | AS 1969 - M4(1).ipt | 149 KB |
| 290 | AbstandsBolzen_3x10_IA.ipt | 96.5 KB |
| 291 | AbstandsBolzen_3x18_IA.ipt | 95 KB |
| 292 | AbstandsBolzen_3x22_II.ipt | 94.5 KB |
| 293 | AbstandsBolzen_3x26_IA.ipt | 93.5 KB |
| 294 | AbstandsBolzen_3x27_IA.ipt | 94.5 KB |
| 295 | AbstandsBolzen_3x3_AA.ipt | 95 KB |
| 296 | AbstandsBolzen_3x5_AA.ipt | 94.5 KB |
| 297 | AbstandsBolzen_3x5_IA.ipt | 98.5 KB |
| 298 | AbstandsBolzen_3x6_IA.ipt | 98 KB |
| 299 | AbstandsBolzen_3x7_IA.ipt | 105 KB |
| 300 | AbstandsBolzen_3x8_IA.ipt | 102 KB |
| 301 | AbstandsBolzen_4x30_IA.ipt | 94.5 KB |
| 302 | AbstandsHülse_M3x3.ipt | 91 KB |
| 303 | Assembly drawings.tr | 2.76 KB |
| 304 | Assembly drawings.tr | 2.76 KB |
| 305 | Autodesk_Logo_Black.png | 4.79 KB |
| 306 | BALLUFF BKS-S 32M-00-1.ipt | 181 KB |
| 307 | BALLUFF BKS-S 32M-00.iam | 83.5 KB |
| 308 | BALLUFF BTL5-A11-M0350-P-S32.iam | 81.5 KB |
| 309 | BALLUFF BTL5-A11-M0350-P-S32.ipt | 804 KB |
| 310 | BI4-M12-AP6X-H1141.ipt | 399 KB |
| 311 | BSI.dwg | 111 KB |
| 312 | BSI.idw | 117 KB |
| 313 | BWI A3.dwg | 774 KB |
| 314 | BasicStructuralUI.xml | 1.55 KB |
| 315 | Bi-M12-X-H21.ipt | 489 KB |
| 316 | Board.ipt | 176 KB |
| 317 | Board_1.ipt | 634 KB |
| 318 | Board_2.ipt | 221 KB |
| 319 | Bounding box^TWN4 OEM PCB.ipt | 85.5 KB |
| 320 | CH-431.iam | 1.13 MB |
| 321 | CLDM8-20-B.ipt | 151 KB |
| 322 | Cable&HarnessDefaultLibrary.iwl | 387 KB |
| 323 | Cold punching parts.tr | 1.54 KB |
| 324 | Cold punching parts.tr | 1.54 KB |
| 325 | CommonSchema.xml | 2.26 KB |
| 326 | ConcreteStructuralUI.xml | 12.5 KB |
| 327 | Configuration.htm | 32.6 KB |
| 328 | Constraint.htm | 744 B |
| 329 | Contact.htm | 328 B |
| 330 | D430003.30.ipt | 2.52 MB |
| 331 | D430003.ipt | 2.63 MB |
| 332 | D431101.36.ipt | 117 KB |
| 333 | D431101.ipt | 120 KB |
| 334 | D57 壳体总成.ipt | 12.6 MB |
| 335 | D571001.17.ipt | 148 KB |
| 336 | D571001.ipt | 175 KB |
| 337 | D5710011.ipt | 123 KB |
| 338 | D571100 - 副本.iam | 100 KB |
| 339 | D571100.iam | 80 KB |
| 340 | D571110.iam | 78 KB |
| 341 | D571110.iam | 89 KB |
| 342 | D571111.7.ipt | 131 KB |
| 343 | D571111.ipt | 141 KB |
| 344 | D571112.12.ipt | 312 KB |
| 345 | D571112.ipt | 303 KB |
| 346 | D571113.18.ipt | 582 KB |
| 347 | D571113.ipt | 595 KB |
| 348 | D571114.21.ipt | 358 KB |
| 349 | D571114.ipt | 357 KB |
| 350 | D571115.26.ipt | 149 KB |
| 351 | D571200.iam | 101 KB |
| 352 | D571200.iam | 77.5 KB |
| 353 | D571201.11.ipt | 1.16 MB |
| 354 | D571201.ipt | 1.14 MB |
| 355 | D571202.16.ipt | 332 KB |
| 356 | D571203.20.ipt | 191 KB |
| 357 | D571203.ipt | 185 KB |
| 358 | D571204.25.ipt | 714 KB |
| 359 | D571204.ipt | 694 KB |
| 360 | D579001.ipt | 102 KB |
| 361 | D591102.ipt | 1.13 MB |
| 362 | D59下壳体总成.iam | 109 KB |
| 363 | DF11.ipt | 357 KB |
| 364 | DIN 125 - A 4,3.ipt | 91 KB |
| 365 | DIN 125-2 - A 3,7A.ipt | 91 KB |
| 366 | DIN 126 - 11.ipt | 91 KB |
| 367 | DIN 126 - 5.5.ipt | 92 KB |
| 368 | DIN 467 - M3.ipt | 116 KB |
| 369 | DIN 6797 - A 4.3.ipt | 149 KB |
| 370 | DIN 923 - M6 x 3.ipt | 116 KB |
| 371 | DIN.dwg | 125 KB |
| 372 | DIN.idw | 128 KB |
| 373 | DIN_439_B___M10x1_25_F_.ipt | 138 KB |
| 374 | DIN_439_B___M22x1_5_F_.ipt | 140 KB |
| 375 | DIN_912___M5x10_F_.ipt | 139 KB |
| 376 | DIN_912___M5x18_F_.ipt | 136 KB |
| 377 | Defaults.ini | 3.73 KB |
| 378 | Display_AUO_G150_XTN05.ipt | 119 KB |
| 379 | EM-005.ipt | 143 KB |
| 380 | EM-054P.ipt | 116 KB |
| 381 | Electrical cases.tr | 2.13 KB |
| 382 | Electrical cases.tr | 2.13 KB |
| 383 | Electrical components bottom^TWN4CoreM.ipt | 104 KB |
| 384 | Electrical components top^TWN4CoreM.ipt | 108 KB |
| 385 | FF 3000451 HLT15Q RFID Leser Design AC sw.ipt | 108 KB |
| 386 | FS-N11CN_11CP_13CP.ipt | 706 KB |
| 387 | FS-N11P.ipt | 704 KB |
| 388 | FU-66TZ.ipt | 122 KB |
| 389 | FU-77TZ.ipt | 122 KB |
| 390 | FaceLoops.xml | 6.31 KB |
| 391 | FatigueStructuralUI.xml | 4.51 KB |
| 392 | Figure.htm | 444 B |
| 393 | FlatPattern.xml | 7.66 KB |
| 394 | FlatPatternExportOpts.xml | 1.63 KB |
| 395 | Forged parts.tr | 1.52 KB |
| 396 | Forged parts.tr | 1.52 KB |
| 397 | Frame0001.iam | 160 KB |
| 398 | Frame0001.iam | 85 KB |
| 399 | GB 70 x 70 x 4 00000001.ipt | 133 KB |
| 400 | GB 70 x 70 x 4 00000001.ipt | 161 KB |
| 401 | GB 70 x 70 x 4 00000002.ipt | 161 KB |
| 402 | GB 70 x 70 x 4 00000003.ipt | 159 KB |
| 403 | GB 70 x 70 x 4 00000004.ipt | 143 KB |
| 404 | GB 70 x 70 x 4 00000004.ipt | 161 KB |
| 405 | GB 70 x 70 x 4 00000005.ipt | 133 KB |
| 406 | GB 70 x 70 x 4 00000006.ipt | 145 KB |
| 407 | GB 70 x 70 x 4 00000007.ipt | 139 KB |
| 408 | GB 70 x 70 x 4 00000008.ipt | 134 KB |
| 409 | GB 70 x 70 x 4 00000009.ipt | 132 KB |
| 410 | GB 70 x 70 x 4 00000010.ipt | 134 KB |
| 411 | GB 70 x 70 x 4 00000011.ipt | 132 KB |
| 412 | GB 70 x 70 x 4 00000012.ipt | 132 KB |
| 413 | GB 70 x 70 x 4 00000013.ipt | 132 KB |
| 414 | GB 70 x 70 x 4 00000017.ipt | 134 KB |
| 415 | GB 70 x 70 x 4 00000018.ipt | 131 KB |
| 416 | GB 70 x 70 x 4 00000019.ipt | 131 KB |
| 417 | GB 70 x 70 x 4 00000020.ipt | 132 KB |
| 418 | GB 70 x 70 x 4 00000021.ipt | 131 KB |
| 419 | GB 70 x 70 x 4 00000022.ipt | 132 KB |
| 420 | GB 70 x 70 x 4 00000023.ipt | 132 KB |
| 421 | GB.dwg | 147 KB |
| 422 | GB.idw | 134 KB |
| 423 | GB_T 119.1-2000 Type A 4 m6 x 8.ipt | 110 KB |
| 424 | GB_T 119.1-2000 Type A 6 m6 x 20.ipt | 108 KB |
| 425 | GCT BF030_GCT BF030-10.iam | 73 KB |
| 426 | GL-R22L.ipt | 1.48 MB |
| 427 | GL-RB01.ipt | 386 KB |
| 428 | GL-RB11.ipt | 181 KB |
| 429 | GOST.dwg | 281 KB |
| 430 | GOST.idw | 287 KB |
| 431 | GT2-71(M)CN_P.iam | 61 KB |
| 432 | GT2-71(M)CN_P.ipt | 539 KB |
| 433 | GT2-CH2M_5M_10M_20M_c.ipt | 280 KB |
| 434 | GT2-H32.ipt | 594 KB |
| 435 | GasStructuralUI.xml | 1.81 KB |
| 436 | GasThermalUI.xml | 2.16 KB |
| 437 | Gasfeder_ausgefahren.iam | 73.5 KB |
| 438 | Gehäuse^Speaker.ipt | 107 KB |
| 439 | GenericStructuralUI.xml | 12 KB |
| 440 | GraphicsUI.xml | 1.88 KB |
| 441 | HBCS8-45.iam | 98 KB |
| 442 | HBLTBA45.iam | 72.5 KB |
| 443 | HDMI.ipt | 1.51 MB |
| 444 | HHSY50.iam | 97.5 KB |
| 445 | HI_163302 DNC-32-450---(ZR).ipt | 822 KB |
| 446 | HI_32682 DPZ-10-25-P-A---(K).ipt | 196 KB |
| 447 | HI_DIN-913 - M3x4.ipt | 110 KB |
| 448 | HI_DIN-913 - M5x5.ipt | 109 KB |
| 449 | HLT15_Quad_V1.1.iam | 482 KB |
| 450 | HMI.ipt | 118 KB |
| 451 | HMI组件.iam | 403 KB |
| 452 | HMI铰链.iam | 99 KB |
| 453 | HNZL100.iam | 72 KB |
| 454 | ISO 4032 - M4ISO.ipt | 113 KB |
| 455 | ISO.dwg | 109 KB |
| 456 | ISO.idw | 96.5 KB |
| 457 | InventorMaterialLibrary-chs.xlf | 828 KB |
| 458 | InventorMaterialLibrary-cht.xlf | 827 KB |
| 459 | InventorMaterialLibrary-csy.xlf | 865 KB |
| 460 | InventorMaterialLibrary-deu.xlf | 857 KB |
| 461 | InventorMaterialLibrary-eng.xlf | 835 KB |
| 462 | InventorMaterialLibrary-esp.xlf | 858 KB |
| 463 | InventorMaterialLibrary-fra.xlf | 857 KB |
| 464 | InventorMaterialLibrary-hun.xlf | 860 KB |
| 465 | InventorMaterialLibrary-ita.xlf | 865 KB |
| 466 | InventorMaterialLibrary-jpn.xlf | 880 KB |
| 467 | InventorMaterialLibrary-kor.xlf | 854 KB |
| 468 | InventorMaterialLibrary-plk.xlf | 867 KB |
| 469 | InventorMaterialLibrary-ptb.xlf | 856 KB |
| 470 | InventorMaterialLibrary-rus.xlf | 997 KB |
| 471 | InventorMaterialLibrary.adsklib | 154 KB |
| 472 | Isolierkörper^GCT BF030_5 Rows.ipt | 212 KB |
| 473 | JIS.dwg | 114 KB |
| 474 | JIS.idw | 117 KB |
| 475 | Kabelbinder_Tail-Cut.ipt | 122 KB |
| 476 | Kontakt 1^Speaker.ipt | 89 KB |
| 477 | Kontakt 2^Speaker.ipt | 89 KB |
| 478 | Kontakte^GCT BF030_5 Rows.ipt | 243 KB |
| 479 | Kunststoffmutter_M20.ipt | 93.5 KB |
| 480 | Kurvenscheibe.ipt | 99 KB |
| 481 | LED Glass_Grn.ipt | 86 KB |
| 482 | LED Glass_Rot.ipt | 86.5 KB |
| 483 | LED Socket.ipt | 92 KB |
| 484 | LED.iam | 72.5 KB |
| 485 | LED_grn.iam | 72.5 KB |
| 486 | LR-ZB100CP.ipt | 585 KB |
| 487 | LTST-C190GKT.iam | 78.5 KB |
| 488 | Lens.ipt | 90.5 KB |
| 489 | LiquidThermalUI.xml | 2.62 KB |
| 490 | Load.htm | 724 B |
| 491 | M10-1_4(13).ipt | 351 KB |
| 492 | M12接近开关弯头.ipt | 153 KB |
| 493 | M12接近开关弯头1.ipt | 139 KB |
| 494 | M22N_BC_T[]_[][].iam | 99.5 KB |
| 495 | M22N_BC_T[]_[][]_BASE.ipt | 227 KB |
| 496 | M22N_BC_T[]_[][]_NUT.ipt | 148 KB |
| 497 | M5___.ipt | 325 KB |
| 498 | M5_______.ipt | 355 KB |
| 499 | ME_5001288_HLT15-U Abdeckblech Rückwand_130110.ipt | 715 KB |
| 500 | ME_5004408_Kühlwinkel Netzteil.ipt | 365 KB |
| 501 | ME_5006664_Schloßkasten Rittal nachbearbeitet_V1.1_141119.ipt | 125 KB |
| 502 | Main.htm | 5.4 KB |
| 503 | Material.htm | 1.05 KB |
| 504 | MaterialsFavorites.xml | 4.51 KB |
| 505 | Mechanical parts.tr | 2.12 KB |
| 506 | Mechanical parts.tr | 2.12 KB |
| 507 | MetalStructuralUI.xml | 12.2 KB |
| 508 | Mold Design (DIN).iam | 63 KB |
| 509 | Mold Design (in).iam | 64.5 KB |
| 510 | Mold Design (mm).iam | 63.5 KB |
| 511 | Mold Design.iam | 63.5 KB |
| 512 | Mold parts.tr | 2.51 KB |
| 513 | Mold parts.tr | 2.51 KB |
| 514 | Montageplatte RFID Leser Elatec TWN4.ipt | 554 KB |
| 515 | Mutter Rittal Schließung.ipt | 93 KB |
| 516 | Mutter___M10x1_25_F_.ipt | 136 KB |
| 517 | Mutter___M8_F_.ipt | 142 KB |
| 518 | NDS_Start Model.ipt | 4.03 MB |
| 519 | Nano-KBN.ipt | 266 KB |
| 520 | OP-73864.ipt | 166 KB |
| 521 | OP-84327.ipt | 353 KB |
| 522 | OP-85497.ipt | 153 KB |
| 523 | OP230 壳蜗合成台.iam | 30.8 MB |
| 524 | OP230 壳蜗合成台.ipj | 9.57 KB |
| 525 | OP230 壳蜗合成台.ipj.old | 9.62 KB |
| 526 | OP230 壳蜗合成台.stp | 226 MB |
| 527 | Open CASCADE STEP translator 6.8 153.2.ipt | 2.34 MB |
| 528 | Open CASCADE STEP translator 6.8 3.2.ipt | 12.2 MB |
| 529 | Open CASCADE STEP translator 6.8 66.6.ipt | 793 KB |
| 530 | PZ-G101EP.ipt | 517 KB |
| 531 | PZ-G61EN_G61EP_G62EN_G62EP.iam | 58 KB |
| 532 | PZ-G61EN_G61EP_G62EN_G62EP.ipt | 516 KB |
| 533 | PZ-G_conecta.ipt | 143 KB |
| 534 | Pad.ipt | 92.5 KB |
| 535 | Pad001.ipt | 99.5 KB |
| 536 | Pad003.ipt | 104 KB |
| 537 | Pad004.ipt | 91.5 KB |
| 538 | Pad005.ipt | 92 KB |
| 539 | Parker A-Lok - 公制标号管件 10 (4).ipt | 451 KB |
| 540 | Parker A-Lok 外锥螺纹 - 公制标号管件 M10 x 1_4.ipt | 275 KB |
| 541 | Parker 双内螺纹管末端 XV500P XV500P-6.ipt | 332 KB |
| 542 | PartsListGroup1.xls | 65.5 KB |
| 543 | PartsListGroup1b.xls | 71.5 KB |
| 544 | PartsListTemplate.xls | 55 KB |
| 545 | PhysMatSchema.xml | 3.33 KB |
| 546 | PhysMatUI.xml | 3.01 KB |
| 547 | Pipes.tr | 1.17 KB |
| 548 | Pipes.tr | 1.17 KB |
| 549 | PlasticStructuralUI.xml | 12.1 KB |
| 550 | PropertyMap_Catia.xml | 4.51 KB |
| 551 | PropertyMap_Creo.xml | 4.38 KB |
| 552 | PropertyMap_NX.xml | 4.48 KB |
| 553 | PropertyMap_SW.xml | 5.04 KB |
| 554 | QST42_50_CT_BODY_50.ipt | 4.79 MB |
| 555 | QST42_FRONT_50_134.ipt | 261 KB |
| 556 | QST42_REARCOVER_02.ipt | 633 KB |
| 557 | QST42_SOCKETHOLDER_134_13.ipt | 337 KB |
| 558 | QST42_SPACER_01.ipt | 120 KB |
| 559 | QST_CONNECTOR_02.ipt | 4.27 MB |
| 560 | R4_Pawl_Catch_clf.ipt | 121 KB |
| 561 | R4_Pawl_clf.ipt | 134 KB |
| 562 | R4_Perpendicular_Lever_clf.ipt | 127 KB |
| 563 | R4_RH_Latch_Body_A_Side_clf.ipt | 221 KB |
| 564 | R4_RH_Latch_Body_B_Side_clf.ipt | 182 KB |
| 565 | R4_RH_Spring_clf.ipt | 389 KB |
| 566 | R4_Rivet_clf.ipt | 108 KB |
| 567 | R4_Spacer_Pin_clf.ipt | 84 KB |
| 568 | R4_Spacer_clf.ipt | 91.5 KB |
| 569 | R4_Tapped_Pin_M6_Thd_clf.ipt | 172 KB |
| 570 | RAM_Steckplatz_DDR3.ipt | 3.22 MB |
| 571 | RKC4T-3-TEL.ipt | 1.73 MB |
| 572 | ReactionForces.htm | 311 B |
| 573 | Rittal Dichtung eckig.ipt | 90 KB |
| 574 | Rittal Dichtung rund.ipt | 93.5 KB |
| 575 | Rittal Schloßklappe.ipt | 112 KB |
| 576 | SC-1415.iam | 105 KB |
| 577 | SHS15C1SS+150L(G=15).iam | 102 KB |
| 578 | SHS15V2SS300300PB1021B064.400.iam | 90 KB |
| 579 | SHS15V2SS300300PB1021B064.400.ipt | 521 KB |
| 580 | SHS20C1SS+500L(G=10).iam | 98.5 KB |
| 581 | SHS20LC1SS+500L.iam | 97.5 KB |
| 582 | SHS20V1SS+430L(G=20&G=50).iam | 98 KB |
| 583 | SMBWLS28RA.ipt | 145 KB |
| 584 | SMT_8M_A_M8D.ipt | 177 KB |
| 585 | SMx_8M_M8D____2_9_CON_.ipt | 207 KB |
| 586 | SND4111-SP-C.ipt | 914 KB |
| 587 | SR-G100.ipt | 10.4 MB |
| 588 | SR-HL1.ipt | 5.32 MB |
| 589 | ST1601153.M1.210.10.01.ipt | 172 KB |
| 590 | ST1608031.M01.45.08.17 拖链护板.ipt | 189 KB |
| 591 | SUNTRI.idw | 2.19 MB |
| 592 | SchloßZylinder.ipt | 115 KB |
| 593 | Sheet Metal (DIN).ipt | 54 KB |
| 594 | Sheet Metal (in).ipt | 57 KB |
| 595 | Sheet Metal (mm).ipt | 54.5 KB |
| 596 | Sheet Metal.ipt | 54.5 KB |
| 597 | Shell.htm | 324 B |
| 598 | Simulation.htm | 3.48 KB |
| 599 | Skeleton0001.ipt | 68.5 KB |
| 600 | Skeleton0001.ipt | 77.5 KB |
| 601 | SolidThermalUI.xml | 4.12 KB |
| 602 | Speaker.iam | 76 KB |
| 603 | Stabilus GmbH_082473_LIFT-O-MAT® StandardprogrammLIFT-O-MAT® 082473_1.ipt | 287 KB |
| 604 | Stabilus GmbH_082473_LIFT-O-MAT® StandardprogrammLIFT-O-MAT® 082473_2.ipt | 93.5 KB |
| 605 | Standard (DIN).iam | 63 KB |
| 606 | Standard (DIN).ipn | 31 KB |
| 607 | Standard (DIN).ipt | 49.5 KB |
| 608 | Standard (in).iam | 63.5 KB |
| 609 | Standard (in).ipn | 32 KB |
| 610 | Standard (in).ipt | 50.5 KB |
| 611 | Standard (mm).iam | 63.5 KB |
| 612 | Standard (mm).ipn | 32 KB |
| 613 | Standard (mm).ipt | 50.5 KB |
| 614 | Standard.dwg | 1.07 MB |
| 615 | Standard.iam | 70 KB |
| 616 | Standard.idw | 134 KB |
| 617 | Standard.ipn | 32 KB |
| 618 | Standard.ipt | 75 KB |
| 619 | Steel mold parts.tr | 2.04 KB |
| 620 | Steel mold parts.tr | 2.04 KB |
| 621 | StructuralCommonSchema.xml | 1.71 KB |
| 622 | StructuralConcreteSchema.xml | 1.16 KB |
| 623 | StructuralGenericSchema.xml | 616 B |
| 624 | StructuralMetalSchema.xml | 723 B |
| 625 | StructuralPlasticSchema.xml | 616 B |
| 626 | StructuralWoodSchema.xml | 2.96 KB |
| 627 | Surface coatings.tr | 384 B |
| 628 | Surface coatings.tr | 384 B |
| 629 | T8LGRXPQP154435.ipt | 2.14 MB |
| 630 | TWN4Carr PCB.ipt | 1.33 MB |
| 631 | TWN4CoreM102 PCB.ipt | 1020 KB |
| 632 | TWN4CoreM_TWN4 CoreM C1 BoundingBox.iam | 79 KB |
| 633 | TWN4MultiTech_OEM_PCB_BoundingBox_Rev_2015-08-21.iam | 106 KB |
| 634 | Template.config | 116 B |
| 635 | ThermalCommonSchema.xml | 1.94 KB |
| 636 | ThermalGasSchema.xml | 1000 B |
| 637 | ThermalLiquidSchema.xml | 1.47 KB |
| 638 | ThermalSolidSchema.xml | 2.57 KB |
| 639 | UNBF-20KN.ipt | 188 KB |
| 640 | UNBF-300N.ipt | 188 KB |
| 641 | UPCN19-B-36.ipt | 122 KB |
| 642 | UPCN27-B-45.ipt | 135 KB |
| 643 | UPS.ipt | 211 KB |
| 644 | UWAN10-80-27.ipt | 122 KB |
| 645 | UWAN10-80-27.ipt | 136 KB |
| 646 | Verguss^Speaker.ipt | 87.5 KB |
| 647 | WLS28-2XW430DSQ.ipt | 1.31 MB |
| 648 | Weld assemblies.tr | 1.13 KB |
| 649 | Weld assemblies.tr | 1.13 KB |
| 650 | WeldFavorites.ini | 988 B |
| 651 | Weldment (ANSI - mm).iam | 186 KB |
| 652 | Weldment (ANSI).iam | 186 KB |
| 653 | Weldment (BSI).iam | 186 KB |
| 654 | Weldment (DIN).iam | 187 KB |
| 655 | Weldment (GB).iam | 59.5 KB |
| 656 | Weldment (ISO).iam | 59.5 KB |
| 657 | Weldment (JIS).iam | 186 KB |
| 658 | Weldment.iam | 59.5 KB |
| 659 | WoodStructuralUI.xml | 14.3 KB |
| 660 | YW-120新型直线.ipt | 114 KB |
| 661 | YW-120直线总装（长）.iam | 87 KB |
| 662 | ZCK-J1C+ZCK-E08C.ipt | 176 KB |
| 663 | _150927 ZBH-9.ipt | 97 KB |
| 664 | _158514 DMM-16-20-P-A---(KS).ipt | 104 KB |
| 665 | _158514 DMM-16-20-P-A---(Z).ipt | 344 KB |
| 666 | _2062 FK-M8---(0BO).ipt | 113 KB |
| 667 | _2062 FK-M8---(BU).ipt | 120 KB |
| 668 | _2062 FK-M8---(GE).ipt | 145 KB |
| 669 | _2062 FK-M8---(KG).ipt | 99.5 KB |
| 670 | _2062 FK-M8---(MU).ipt | 134 KB |
| 671 | _32682 DPZ-10-25-P-A---(Z).ipt | 234 KB |
| 672 | _536250 ADN-15-P---(Z).ipt | 580 KB |
| 673 | _536250 ADN-15-P-A_(KS).ipt | 108 KB |
| 674 | _560219 HGPT-40-A-B-F---(0)G.ipt | 609 KB |
| 675 | _BBAC40690 HGPT-40-A-B.ipt | 150 KB |
| 676 | _DIN-439-B - M10x1.25(F).ipt | 116 KB |
| 677 | _DIN-439-B - M4(F).ipt | 114 KB |
| 678 | _DIN-439-B - M8(F).ipt | 114 KB |
| 679 | _DNC-32-450---(KS).ipt | 94.5 KB |
| 680 | _Sechskantschraube DIN 933 - M4x18.ipt | 116 KB |
| 681 | am_ansi.dwg | 259 KB |
| 682 | am_bsi.dwg | 276 KB |
| 683 | am_din.dwg | 326 KB |
| 684 | am_gb.dwg | 158 KB |
| 685 | am_iso.dwg | 145 KB |
| 686 | am_jis.dwg | 238 KB |
| 687 | balloon.xml | 65.9 KB |
| 688 | centermark.xml | 11.2 KB |
| 689 | clearance.xls | 122 KB |
| 690 | datumtarget.xml | 31.5 KB |
| 691 | dimension.xml | 3.02 MB |
| 692 | exportdwg.ini | 1.01 KB |
| 693 | exportdxf.ini | 1.01 KB |
| 694 | externalmaterialmapping.xml | 23.1 KB |
| 695 | featureautoname.xml | 16.1 KB |
| 696 | featurecontrolframe.xml | 31 KB |
| 697 | harness.iam | 71.5 KB |
| 698 | hatch.xml | 7.37 KB |
| 699 | holetable.xml | 1.44 MB |
| 700 | id.xml | 43.1 KB |
| 701 | importacad.ini | 994 B |
| 702 | importdxf.ini | 986 B |
| 703 | importmdt.ini | 990 B |
| 704 | j底架草图装配台800-3.ipt | 101 KB |
| 705 | j零件41.ipt | 102 KB |
| 706 | j零件42.ipt | 113 KB |
| 707 | j零件43.ipt | 116 KB |
| 708 | layers.xml | 166 KB |
| 709 | leader.xml | 50.8 KB |
| 710 | lighting.xml | 62.7 KB |
| 711 | materialmapping.xml | 202 KB |
| 712 | minus.png | 167 B |
| 713 | mold base.xml | 113 KB |
| 714 | mold design stop pin.ipt | 80.5 KB |
| 715 | objectdefaults.xml | 485 KB |
| 716 | packngo.log | 175 KB |
| 717 | partslist.xml | 351 KB |
| 718 | piping runs.iam | 259 KB |
| 719 | plus.png | 172 B |
| 720 | propertymap.xml | 14.2 KB |
| 721 | proteinmapping.xml | 643 KB |
| 722 | realisticallowedcommands.xml | 29.2 KB |
| 723 | revisiontable.xml | 108 KB |
| 724 | s_001_030_200_12_m_stp.ipt | 828 KB |
| 725 | s_004_000_200_12d_m_stp.ipt | 808 KB |
| 726 | sheetmetalrules.xml | 6.66 KB |
| 727 | sheetmetalunfold.xml | 6.18 KB |
| 728 | standard.xml | 287 KB |
| 729 | studioimagebasedlighting.xml | 14 KB |
| 730 | studiolighting.xml | 52.5 KB |
| 731 | studioscene.xml | 23 KB |
| 732 | surfacetexture.xml | 23.7 KB |
| 733 | table.xml | 39.7 KB |
| 734 | tc0220tu-bg63-122004.ipt | 2.76 MB |
| 735 | text.xml | 30.4 KB |
| 736 | thread.xls | 1.57 MB |
| 737 | viewannotation.xml | 29.5 KB |
| 738 | weld.xml | 37.9 KB |
| 739 | weldbead.xml | 15.1 KB |
| 740 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 741 | 一体机支架.ipt | 186 KB |
| 742 | 三联件.iam | 122 KB |
| 743 | 下夹具.iam | 173 KB |
| 744 | 仿宋_GB2312(1).TTF | 3.81 MB |
| 745 | 传感器支架.ipt | 142 KB |
| 746 | 传感器支架1.ipt | 157 KB |
| 747 | 传感器支架2.ipt | 158 KB |
| 748 | 保护件.ipt | 135 KB |
| 749 | 储气罐.iam | 426 KB |
| 750 | 光栅护罩-1.ipt | 208 KB |
| 751 | 光栅护罩.ipt | 195 KB |
| 752 | 光纤支架1.ipt | 117 KB |
| 753 | 公众号免费下载.jpg | 79 KB |
| 754 | 减压阀底板.ipt | 130 KB |
| 755 | 减振脚垫1.ipt | 109 KB |
| 756 | 减震垫.ipt | 118 KB |
| 757 | 刀具.ipt | 115 KB |
| 758 | 刀头限位.ipt | 155 KB |
| 759 | 单孔按钮盒.ipt | 193 KB |
| 760 | 压力传感器壳.ipt | 254 KB |
| 761 | 压力传感器壳盖.ipt | 168 KB |
| 762 | 压帽11.ipt | 96 KB |
| 763 | 压机连接件.ipt | 199 KB |
| 764 | 压缩弹簧1.iam | 42 KB |
| 765 | 压缩弹簧1.iam | 54.5 KB |
| 766 | 压缩弹簧11.ipt | 708 KB |
| 767 | 压缩弹簧11.ipt | 786 KB |
| 768 | 压缩弹簧12.ipt | 799 KB |
| 769 | 压缩弹簧12.ipt | 946 KB |
| 770 | 压缩弹簧2.iam | 42 KB |
| 771 | 压缩弹簧2.iam | 55 KB |
| 772 | 压缸法兰1.ipt | 188 KB |
| 773 | 压缸法兰2.ipt | 190 KB |
| 774 | 压装蜗杆总成.iam | 299 KB |
| 775 | 反光带 OP-84221.ipt | 97.5 KB |
| 776 | 反光带板.ipt | 118 KB |
| 777 | 可调螺杆.ipt | 88 KB |
| 778 | 合页.ipt | 141 KB |
| 779 | 合页.ipt | 150 KB |
| 780 | 后门.iam | 99.5 KB |
| 781 | 哈丁H3A.ipt | 99 KB |
| 782 | 固定座G.ipt | 163 KB |
| 783 | 垫圈 GB 858 48.ipt | 236 KB |
| 784 | 垫块1.ipt | 130 KB |
| 785 | 垫片A.ipt | 104 KB |
| 786 | 塔灯.ipt | 175 KB |
| 787 | 塔灯安装座.ipt | 123 KB |
| 788 | 增压缸远点支架.ipt | 137 KB |
| 789 | 夹爪气缸转接板.ipt | 192 KB |
| 790 | 安装块.ipt | 150 KB |
| 791 | 定位套.ipt | 172 KB |
| 792 | 实体3.ipt | 164 KB |
| 793 | 实体3_1.ipt | 255 KB |
| 794 | 实体3_2.ipt | 351 KB |
| 795 | 实体4.ipt | 220 KB |
| 796 | 实体4_1.ipt | 293 KB |
| 797 | 实体5.ipt | 112 KB |
| 798 | 实体5_1.ipt | 128 KB |
| 799 | 实体6.ipt | 225 KB |
| 800 | 实体6_1.ipt | 266 KB |
| 801 | 实体7.ipt | 112 KB |
| 802 | 实体7_1.ipt | 266 KB |
| 803 | 对中定心部件.iam | 388 KB |
| 804 | 对中定心部件1.iam | 87.5 KB |
| 805 | 导轨顶紧.ipt | 134 KB |
| 806 | 工字架固定底板.ipt | 96 KB |
| 807 | 工字架方管.ipt | 90.5 KB |
| 808 | 底座组.iam | 720 KB |
| 809 | 废料滑道1.ipt | 331 KB |
| 810 | 废料滑道罩.ipt | 131 KB |
| 811 | 废料滑道门.ipt | 130 KB |
| 812 | 废料箱.iam | 169 KB |
| 813 | 废料道支架.ipt | 143 KB |
| 814 | 拖链(小1）.ipt | 133 KB |
| 815 | 拖链(小）.ipt | 132 KB |
| 816 | 拖链支架.ipt | 264 KB |
| 817 | 拖链支架1.ipt | 169 KB |
| 818 | 拖链支架2.ipt | 189 KB |
| 819 | 拧紧螺母部件.iam | 2.68 MB |
| 820 | 挂锁.ipt | 153 KB |
| 821 | 指示灯支架.ipt | 149 KB |
| 822 | 按钮盒支架.ipt | 163 KB |
| 823 | 接近开关护罩.ipt | 151 KB |
| 824 | 控制器安装板1.ipt | 199 KB |
| 825 | 操作盒.ipt | 225 KB |
| 826 | 支撑轴杆.ipt | 164 KB |
| 827 | 支架.ipt | 123 KB |
| 828 | 放大器护罩.ipt | 146 KB |
| 829 | 数字调频震动送料器.ipt | 1.25 MB |
| 830 | 料盒底板.ipt | 177 KB |
| 831 | 料盒底板1.ipt | 194 KB |
| 832 | 旋转支架.ipt | 160 KB |
| 833 | 有机玻璃板1.ipt | 130 KB |
| 834 | 有机玻璃板10-1.ipt | 139 KB |
| 835 | 有机玻璃板10.ipt | 125 KB |
| 836 | 有机玻璃板11.ipt | 126 KB |
| 837 | 有机玻璃板12.ipt | 167 KB |
| 838 | 有机玻璃板14.ipt | 140 KB |
| 839 | 有机玻璃板15.ipt | 166 KB |
| 840 | 有机玻璃板16.ipt | 136 KB |
| 841 | 有机玻璃板7.ipt | 125 KB |
| 842 | 气液增压缸连接件-1.ipt | 264 KB |
| 843 | 气液增压缸连接件.ipt | 272 KB |
| 844 | 气缸安装件.ipt | 126 KB |
| 845 | 气缸安装板.ipt | 156 KB |
| 846 | 气路安装板.ipt | 357 KB |
| 847 | 气路控制板3.iam | 2.7 MB |
| 848 | 油盘.ipt | 181 KB |
| 849 | 油脂调压阀.ipt | 243 KB |
| 850 | 注油头.ipt | 207 KB |
| 851 | 注油支架.ipt | 252 KB |
| 852 | 注油部件.iam | 1.65 MB |
| 853 | 浮动块.ipt | 249 KB |
| 854 | 浮动附件.ipt | 163 KB |
| 855 | 物料板.ipt | 212 KB |
| 856 | 玻璃支架1.ipt | 152 KB |
| 857 | 玻璃支架2.ipt | 152 KB |
| 858 | 玻璃支架3.ipt | 154 KB |
| 859 | 电柜1.ipt | 130 KB |
| 860 | 电柜底座.iam | 188 KB |
| 861 | 电柜框架草图.ipt | 85.5 KB |
| 862 | 电柜筋板.ipt | 118 KB |
| 863 | 电源支架.ipt | 144 KB |
| 864 | 盖板.ipt | 126 KB |
| 865 | 直线工字板上板.ipt | 104 KB |
| 866 | 直线底板.ipt | 95.5 KB |
| 867 | 硬管.ipt | 104 KB |
| 868 | 硬管1.ipt | 124 KB |
| 869 | 硬管2.ipt | 105 KB |
| 870 | 磁块支架.ipt | 126 KB |
| 871 | 磁铁3x5.ipt | 104 KB |
| 872 | 福马轮 SQ-FW100D.ipt | 211 KB |
| 873 | 端盖.ipt | 141 KB |
| 874 | 线槽.ipt | 103 KB |
| 875 | 翻页文件夹.ipt | 512 KB |
| 876 | 聚氨酯套.ipt | 136 KB |
| 877 | 螺帽.ipt | 127 KB |
| 878 | 螺栓 GB_T 5783 M6 x 12.ipt | 187 KB |
| 879 | 螺母 GB 810 M24 x 1.5.ipt | 149 KB |
| 880 | 螺母 GB 812 M48 x 1.5.ipt | 195 KB |
| 881 | 螺母 GB_T 6170 M6.ipt | 183 KB |
| 882 | 螺母 GB_T 6170 M8.ipt | 181 KB |
| 883 | 螺母 GB_T 6172.1 M4.ipt | 168 KB |
| 884 | 螺母 GB_T 6172.1 M6.ipt | 166 KB |
| 885 | 螺母定位部件.iam | 177 KB |
| 886 | 螺母直线轨道.ipt | 108 KB |
| 887 | 螺母送料（含隔音罩）.iam | 130 KB |
| 888 | 螺钉 GB_T 70.1 M3 x 10.ipt | 185 KB |
| 889 | 螺钉 GB_T 70.1 M3 x 20.ipt | 181 KB |
| 890 | 螺钉 GB_T 70.1 M4 x 12.ipt | 206 KB |
| 891 | 螺钉 GB_T 70.1 M5 x 20.ipt | 201 KB |
| 892 | 触须开关支架.ipt | 288 KB |
| 893 | 设备铭牌.ipt | 690 KB |
| 894 | 调压阀安装板.ipt | 120 KB |
| 895 | 转盘.ipt | 245 KB |
| 896 | 连接杆.ipt | 219 KB |
| 897 | 连接板.ipt | 200 KB |
| 898 | 连接板1.ipt | 176 KB |
| 899 | 金属件振动盘出口1.ipt | 152 KB |
| 900 | 钢 F 70x70x4-19.5 GB_T 6728-2002.ipt | 127 KB |
| 901 | 钢 F 70x70x4-360 GB_T 6728-2002.ipt | 139 KB |
| 902 | 钢 F 70x70x4-760 GB_T 6728-2002-1.ipt | 143 KB |
| 903 | 钢球.ipt | 122 KB |
| 904 | 钢球料盒.ipt | 233 KB |
| 905 | 钢球料盒罩.ipt | 238 KB |
| 906 | 钢球送料机构.iam | 1.8 MB |
| 907 | 钢球铆压.iam | 1.78 MB |
| 908 | 钣金.ipt | 55 KB |
| 909 | 铆压螺纹部件.iam | 235 KB |
| 910 | 铝材 4545-04.ipt | 240 KB |
| 911 | 铝材 4545-09.ipt | 238 KB |
| 912 | 铝材 4545-10.ipt | 231 KB |
| 913 | 铝材 4545-12.ipt | 227 KB |
| 914 | 铝材 4545-13.ipt | 229 KB |
| 915 | 铝材 4545-18.ipt | 236 KB |
| 916 | 铝材 4545-39.ipt | 231 KB |
| 917 | 铝材 4545-40.ipt | 274 KB |
| 918 | 铝材 4545-401.ipt | 273 KB |
| 919 | 铝材 4545-50.ipt | 278 KB |
| 920 | 铝材 4545-60.ipt | 273 KB |
| 921 | 铝材 4545.ipt | 287 KB |
| 922 | 铝材 4545.ipt | 301 KB |
| 923 | 销 GB_T 120.1 6 x 18.ipt | 152 KB |
| 924 | 锁紧螺钉.ipt | 137 KB |
| 925 | 键盘.ipt | 1.69 MB |
| 926 | 键盘盒.ipt | 176 KB |
| 927 | 阀座垫板3位.ipt | 124 KB |
| 928 | 阀片垫块1111.ipt | 107 KB |
| 929 | 防护板.ipt | 134 KB |
| 930 | 限位块.ipt | 127 KB |
| 931 | 限位垫块-1.ipt | 146 KB |
| 932 | 限位垫块.ipt | 148 KB |
| 933 | 限位座.ipt | 157 KB |
| 934 | 限位开关支架.ipt | 126 KB |
| 935 | 限位片.ipt | 144 KB |
| 936 | 隔区玻璃1.ipt | 173 KB |
| 937 | 隔区玻璃2.ipt | 154 KB |
| 938 | 零件.ipt | 75 KB |
| 939 | 零件10.ipt | 178 KB |
| 940 | 零件1000.ipt | 144 KB |
| 941 | 零件101.ipt | 325 KB |
| 942 | 零件1011.ipt | 144 KB |
| 943 | 零件1012.ipt | 144 KB |
| 944 | 零件1013.ipt | 147 KB |
| 945 | 零件104.ipt | 149 KB |
| 946 | 零件11.ipt | 121 KB |
| 947 | 零件12.ipt | 148 KB |
| 948 | 零件121.ipt | 109 KB |
| 949 | 零件13.ipt | 176 KB |
| 950 | 零件1314-1.ipt | 122 KB |
| 951 | 零件17-1.ipt | 172 KB |
| 952 | 零件17.ipt | 175 KB |
| 953 | 零件18.ipt | 221 KB |
| 954 | 零件19.ipt | 244 KB |
| 955 | 零件1910.ipt | 224 KB |
| 956 | 零件192.iam | 197 KB |
| 957 | 零件192.ipt | 571 KB |
| 958 | 零件194.ipt | 198 KB |
| 959 | 零件2.ipt | 159 KB |
| 960 | 零件207-1.ipt | 180 KB |
| 961 | 零件207-2.ipt | 180 KB |
| 962 | 零件207.ipt | 173 KB |
| 963 | 零件22-3.ipt | 278 KB |
| 964 | 零件235.ipt | 200 KB |
| 965 | 零件2413.ipt | 223 KB |
| 966 | 零件271.ipt | 169 KB |
| 967 | 零件28.ipt | 217 KB |
| 968 | 零件30.ipt | 183 KB |
| 969 | 零件31.ipt | 181 KB |
| 970 | 零件3456.ipt | 150 KB |
| 971 | 零件35.ipt | 131 KB |
| 972 | 零件351.ipt | 467 KB |
| 973 | 零件3513.ipt | 189 KB |
| 974 | 零件352.ipt | 689 KB |
| 975 | 零件37.ipt | 131 KB |
| 976 | 零件4.ipt | 189 KB |
| 977 | 零件43-2.ipt | 329 KB |
| 978 | 零件43-3.ipt | 331 KB |
| 979 | 零件43.ipt | 307 KB |
| 980 | 零件49.ipt | 384 KB |
| 981 | 零件50.ipt | 229 KB |
| 982 | 零件51.ipt | 215 KB |
| 983 | 零件6.1.ipt | 733 KB |
| 984 | 零件6.3.ipt | 748 KB |
| 985 | 零件6.ipt | 315 KB |
| 986 | 零件65.ipt | 221 KB |
| 987 | 零件66-1.ipt | 144 KB |
| 988 | 零件66.ipt | 145 KB |
| 989 | 零件7.ipt | 298 KB |
| 990 | 零件823.ipt | 135 KB |
| 991 | 零件9.ipt | 203 KB |
| 992 | 零件92.ipt | 103 KB |
| 993 | 零件96.ipt | 234 KB |
| 994 | 零件98.ipt | 269 KB |
| 995 | 顶销2.ipt | 161 KB |
| 996 | 鼠标盒.ipt | 174 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要150金币
图纸ID：502163
文件大小：374.8M
软件版本：STEP,INVENTOR,AUTOCAD 2010
图纸格式：ipt,dwg
参数/编辑：可修改，包括参数
上传时间：2019-11-11
图纸介绍：
发布者
凌晨两点半
作品: 17446
粉丝: 189
提示
×
下载该图档需要消耗150金币！
确认下载
