微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
番薯加工流水线（ID:542838）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | 0.5 inch Elbow(Default).sldprt | 59.5 KB |
| 3 | 0.5 inch Equal Tee.sldprt | 59.5 KB |
| 4 | 001-10-290119-1-00 - Local de montagem_Valor predeterminado_Como usinado_.sldprt | 2.02 MB |
| 5 | 001-10-310119-3-00-Esteira sa韉a pelador L3-L4_Valor predeterminado_Como usinado_.sldprt | 204 KB |
| 6 | 001-10-310119-4-00-Moega - Esteira sa韉a pelador L1-L2 contin_Valor predeterminado_Como usinado_.sldprt | 132 KB |
| 7 | 001-10-310119-5-00-Revestimento Sa韉a Pelador L1-L2.sldprt | 63 KB |
| 8 | 001-10-310119-7-00-Setor Existente - Vista Parcial.sldasm | 62 KB |
| 9 | 001-10-310119-8-00-Esteira sa韉a pelador L1-L2_Valor predeterminado_Como usinado_.sldprt | 93.5 KB |
| 10 | 001-10-310119-9-00-Esteira sa韉a pelador L1-L2 contin._Valor predeterminado_Como usinado_.sldprt | 128 KB |
| 11 | 1 inch Elbow(Default).sldprt | 60 KB |
| 12 | 129_level sensor brkt 2.stp.sldprt | 63.5 KB |
| 13 | 129_sensor brk4.stp.sldprt | 60.5 KB |
| 14 | 129_sensor brkt stud.stp.sldprt | 58 KB |
| 15 | 129_sensor brkt3.stp.sldprt | 67.5 KB |
| 16 | 129_sensor brkt4.stp.sldprt | 61.5 KB |
| 17 | 129_sensor brkt5.stp.sldprt | 67.5 KB |
| 18 | 3 rjt union.stp.sldprt | 60 KB |
| 19 | 303_GFE hopper pt 3.stp.sldprt | 67.5 KB |
| 20 | 303_GFE hopper pt 4.stp.sldprt | 61 KB |
| 21 | 303_GFE leg frame mount boss.stp.sldprt | 58.5 KB |
| 22 | 303_GFE bottom support frame pad 2.stp.sldprt | 61 KB |
| 23 | 303_GFE hopper pt 4A.stp.sldprt | 61.5 KB |
| 24 | 303_GFE perf tray guide.stp.sldprt | 59.5 KB |
| 25 | 303_GFE return plastic 2.stp.sldprt | 62 KB |
| 26 | 303_GFE return tab.stp.sldprt | 60.5 KB |
| 27 | 303_GFE tail brg boss.stp.sldprt | 58.5 KB |
| 28 | 303_GFE tail brg lug.stp.sldprt | 60.5 KB |
| 29 | 303_GFE tail cover hinge pt 1.stp.sldprt | 61 KB |
| 30 | 303_GFE tail end corner part.stp.sldprt | 59 KB |
| 31 | 303_GFE tank end drain pipe.stp.sldprt | 63.5 KB |
| 32 | 303_GFE top support frame pad 1.stp.sldprt | 65.5 KB |
| 33 | 303_GFE top support frame pad 2.stp.sldprt | 104 KB |
| 34 | 303_GFE top support frame pad mate.stp.sldprt | 104 KB |
| 35 | 303_GFE under tray corner infill.stp.sldprt | 64.5 KB |
| 36 | 303_GFE under tray corner infill_MIR.stp.sldprt | 64.5 KB |
| 37 | 303_GFE_ discharge chute clamp plate.stp.sldprt | 62 KB |
| 38 | 303_GFE_ drive brg boss.stp.sldprt | 58 KB |
| 39 | 304_PFE Side sump corner infill.stp.sldprt | 59 KB |
| 40 | 304_PFE return plastic 2.stp.sldprt | 62 KB |
| 41 | 304_PFE tank tail window 1.stp.sldprt | 910 KB |
| 42 | 304_PFE_ discharge chute pt 1.stp.sldprt | 75.5 KB |
| 43 | 304_PFE_ discharge chute pt 1_MIR.stp.sldprt | 75.5 KB |
| 44 | 304_PFE_ discharge chute wrap.stp.sldprt | 63 KB |
| 45 | 304_PFE_Hopper corner infill.stp.sldprt | 63.5 KB |
| 46 | 307_GFE Side 1 valance end plate.stp.sldprt | 71.5 KB |
| 47 | 307_GFE bottom support frame foot.stp.sldprt | 65.5 KB |
| 48 | 307_GFE tail brg cover 1.stp.sldprt | 118 KB |
| 49 | 307_GFE tail cover hinge pt 1.stp.sldprt | 64.5 KB |
| 50 | 307_drive brg runner.stp.sldprt | 59.5 KB |
| 51 | 307_guard switch 1.stp.sldprt | 77 KB |
| 52 | 323 _GFE tail cover.stp.sldasm | 55.5 KB |
| 53 | 323_GFE Hopper.stp.sldasm | 63 KB |
| 54 | 323_GFE bed pt 1.stp.sldprt | 69 KB |
| 55 | 323_GFE body bottom.stp.sldprt | 68.5 KB |
| 56 | 323_GFE body pt 2.stp.sldprt | 96 KB |
| 57 | 323_GFE body pt4.stp.sldprt | 246 KB |
| 58 | 323_GFE body pt4_MIR.stp.sldprt | 244 KB |
| 59 | 323_GFE body pt5.stp.sldprt | 74.5 KB |
| 60 | 323_GFE body tie 1.stp.sldprt | 64 KB |
| 61 | 323_GFE main body.stp.sldasm | 137 KB |
| 62 | 323_GFE sensor frame.stp.sldprt | 107 KB |
| 63 | 323_GFE tail cover pt 1-1.stp.sldprt | 110 KB |
| 64 | 323_GFE tail cover pt 1.stp.sldasm | 54 KB |
| 65 | 323_GFE tail cover pt 2.stp.sldprt | 125 KB |
| 66 | 323_GFE tail cover rib 1.stp.sldprt | 73 KB |
| 67 | 323_GFE tank end temp.stp.sldprt | 390 KB |
| 68 | 323_GFE top cover 3.stp.sldasm | 53 KB |
| 69 | 323_GFE top cover top pt 1.stp.sldprt | 91.5 KB |
| 70 | 323_GFE top cover top pt 2.stp.sldprt | 140 KB |
| 71 | 323_GFE under tray 2.stp.sldprt | 70 KB |
| 72 | 323_GFE under tray 3.stp.sldprt | 74 KB |
| 73 | 323_GFE Side 1 valance 1.stp.sldprt | 78 KB |
| 74 | 323_GFE Valance 1.stp.sldasm | 52.5 KB |
| 75 | 323_GFE Valance 1.stp_1.sldasm | 52.5 KB |
| 76 | 323_GFE _Elevator tail shaft.stp.sldprt | 60 KB |
| 77 | 323_GFE cover end1.stp.sldprt | 88 KB |
| 78 | 323_GFE discharge chute pt 2.stp.sldprt | 63 KB |
| 79 | 323_GFE discharge chute volta new.stp.sldprt | 59.5 KB |
| 80 | 323_GFE discharge chute.stp.sldasm | 59 KB |
| 81 | 323_GFE dive shaft.stp.sldprt | 63 KB |
| 82 | 323_GFE hopper pt 2.stp.sldprt | 90 KB |
| 83 | 323_GFE hopper pt 2_MIR.stp.sldprt | 90 KB |
| 84 | 323_GFE idle shaft.stp.sldprt | 59.5 KB |
| 85 | 323_GFE perf door.stp.sldasm | 55.5 KB |
| 86 | 323_GFE perf tray door 2.stp.sldprt | 73.5 KB |
| 87 | 323_GFE perf tray.stp.sldprt | 113 KB |
| 88 | 323_GFE_ hopper pt 1.stp.sldprt | 69.5 KB |
| 89 | 323_GFE_Bottom support frame.stp.sldasm | 59 KB |
| 90 | 323_GFE_Top support frame.stp.sldasm | 59 KB |
| 91 | 323_GFE_body pt3.stp.sldprt | 185 KB |
| 92 | 323__GFE Assembly.sldasm | 75.5 KB |
| 93 | 323__GFE Assembly.stp.sldasm | 144 KB |
| 94 | 420 x 310 manway.stp.sldprt | 112 KB |
| 95 | BS4504 Gaskets(BS4504 Flange Gasket-DN 25).sldprt | 59.5 KB |
| 96 | Bearing End Cap.sldprt | 114 KB |
| 97 | Bearing Housing.sldprt | 107 KB |
| 98 | Bearing(Bearing Housing With Cap)-1.sldasm | 52 KB |
| 99 | Bearing(Bearing Housing With Cap)-2.sldasm | 52 KB |
| 100 | Bearing(Bearing Housing With Cap)-3.sldasm | 52 KB |
| 101 | Bearing(Bearing Housing With Cap).sldasm | 52 KB |
| 102 | Bearing(Bearing Housing)-1.sldasm | 52 KB |
| 103 | Bearing(Bearing Housing).sldasm | 52 KB |
| 104 | Bearing.sldprt | 134 KB |
| 105 | BulkHead Connector.sldprt | 63.5 KB |
| 106 | C2854-100.sldasm | 133 KB |
| 107 | C2854-200(With Volta).sldasm | 276 KB |
| 108 | C2854-200-1(Default).sldprt | 65.5 KB |
| 109 | C2854-200-2.sldprt | 67 KB |
| 110 | C2854-200-3(Default).sldprt | 61 KB |
| 111 | C2854-200-4(Default).sldprt | 67 KB |
| 112 | C2854-200-5(Clamp Strip 1).sldprt | 60.5 KB |
| 113 | C2854-200-5(Clamp Strip 2).sldprt | 60 KB |
| 114 | C2854-200-5(Clamp Strip 3).sldprt | 60 KB |
| 115 | C2854-200-6.sldprt | 63 KB |
| 116 | C2854-200-7(Default).sldprt | 107 KB |
| 117 | C2854-200-8.sldprt | 62.5 KB |
| 118 | C2854-201(Default_As Machined_).sldprt | 249 KB |
| 119 | Calha alimenta玢o elevador L3 e L4.sldprt | 78 KB |
| 120 | Chapa Cobertura Extrem Parede-485.sldprt | 88 KB |
| 121 | Chapa Cobertura Extrem-1155x1700.sldprt | 88 KB |
| 122 | Chapa Cobertura Extrem-1155x335.sldprt | 88 KB |
| 123 | Chapa Cobertura L1000x2750.sldprt | 90.5 KB |
| 124 | Chapa Cobertura L1155x3000.sldprt | 91.5 KB |
| 125 | Coluna de Sustenta玢o-1370_Valor predeterminado_Como usinado_.sldprt | 72.5 KB |
| 126 | Coluna de Sustenta玢o-1810_EspelharValor predeterminado_Como usinado_.sldprt | 72.5 KB |
| 127 | Coluna de Sustenta玢o-1810_Valor predeterminado_Como usinado_.sldprt | 72.5 KB |
| 128 | Corrim鉶 Passarela_Valor predeterminado_Como usinado_.sldprt | 116 KB |
| 129 | Curved Spring Lock Washer_DIN(Spring washer DIN 128 - A10).sldprt | 63.5 KB |
| 130 | Curved Spring Lock Washer_DIN(Spring washer DIN 128 - A6).sldprt | 61 KB |
| 131 | D00203925 CS-0750-1550-L.sldprt | 2.24 MB |
| 132 | Escada Acesso Plataforma_Valor predeterminado_Como usinado_.sldprt | 155 KB |
| 133 | Estrutura Principal_Valor predeterminado_Como usinado_.sldprt | 158 KB |
| 134 | FH-200(Default).sldprt | 81.5 KB |
| 135 | FH-200(Right Hand).sldprt | 81.5 KB |
| 136 | FH-204.sldprt | 57.5 KB |
| 137 | FH-205.sldprt | 60.5 KB |
| 138 | FH-206.sldprt | 61 KB |
| 139 | FH-207.sldprt | 63 KB |
| 140 | FH-208.sldprt | 57.5 KB |
| 141 | FH-209.sldprt | 58.5 KB |
| 142 | FH-210.sldprt | 58 KB |
| 143 | FH-211.sldprt | 61 KB |
| 144 | FH-212-1.sldprt | 77 KB |
| 145 | FH-212-2.sldprt | 77.5 KB |
| 146 | FH-213(Default).sldasm | 82 KB |
| 147 | FH-213(Opposite Hand).sldasm | 82 KB |
| 148 | FH-229(Default).sldprt | 99.5 KB |
| 149 | FH-229(Opposite Hand).sldprt | 101 KB |
| 150 | FH-231-1.sldprt | 60 KB |
| 151 | FH-238.sldprt | 58.5 KB |
| 152 | FH-239.sldprt | 101 KB |
| 153 | FH-243-14.sldprt | 58 KB |
| 154 | FH-243-16.sldprt | 58 KB |
| 155 | FH-243.sldprt | 57.5 KB |
| 156 | FH-245.sldprt | 57.5 KB |
| 157 | FH-246.sldprt | 61 KB |
| 158 | FH-247(Default_As Machined_).sldprt | 87.5 KB |
| 159 | FH-247(TAIL END_As Machined_).sldprt | 90 KB |
| 160 | FH-248.sldprt | 77 KB |
| 161 | FH-249.sldprt | 84.5 KB |
| 162 | FH-250(Default).sldprt | 82 KB |
| 163 | FH-253(Default).sldprt | 594 KB |
| 164 | FH4 US-100-Stripped.sldasm | 146 KB |
| 165 | FH4-205-1.sldprt | 61 KB |
| 166 | FH4-205-2.sldprt | 60.5 KB |
| 167 | FH4-205-3.sldprt | 63 KB |
| 168 | FH4-205.sldasm | 87.5 KB |
| 169 | FH4-206(Default).sldprt | 73.5 KB |
| 170 | FH4-212-3.sldprt | 61 KB |
| 171 | FH4-212-4.sldprt | 60 KB |
| 172 | FH4-213(Default).sldasm | 101 KB |
| 173 | FH4-221.sldprt | 238 KB |
| 174 | FH4-224-1.sldprt | 61 KB |
| 175 | FH4-224-2.sldprt | 60.5 KB |
| 176 | FH4-224-3.sldprt | 62.5 KB |
| 177 | FH4-224.sldasm | 147 KB |
| 178 | FH4-225(Default).sldasm | 108 KB |
| 179 | FH4-226(Default).sldprt | 101 KB |
| 180 | FH4-227.sldasm | 133 KB |
| 181 | FH4-228.sldprt | 111 KB |
| 182 | FH4-229.sldprt | 143 KB |
| 183 | FH4-231(Default_As Machined_)-1.sldprt | 143 KB |
| 184 | FH4-231.sldasm | 242 KB |
| 185 | FH4-232(Left Hand Side Plate (C.I.P)).sldprt | 105 KB |
| 186 | FH4-232-2(Left Hand Side Plate (C.I.P)).sldprt | 99.5 KB |
| 187 | FH4-234 - Front(Default).sldprt | 496 KB |
| 188 | FH4-234 - Side(Default).sldprt | 264 KB |
| 189 | FH4-234.1.sldprt | 74.5 KB |
| 190 | FH4-234.7(Default).sldprt | 263 KB |
| 191 | FH4-234.sldasm | 53.5 KB |
| 192 | FH4-237.sldprt | 117 KB |
| 193 | FH4-238.sldprt | 148 KB |
| 194 | Filter(Default).sldprt | 105 KB |
| 195 | Flange Slip-On BS4504 PN 16(BS4504 Flange-DN 15).sldprt | 59.5 KB |
| 196 | Flange Slip-On BS4504 PN 16(BS4504 Flange-DN 25).sldprt | 59.5 KB |
| 197 | Frame0001-1.stp.sldasm | 56 KB |
| 198 | Frame0001.stp.sldasm | 54 KB |
| 199 | Gasket.sldprt | 59 KB |
| 200 | Hex Head Screw M8 X 25(Hex Head Screw M8x20).sldprt | 68 KB |
| 201 | Hex Nut Style 1 GradeAB_DIN(Hexagon Nut ISO 4032 - M16 - D - N).sldprt | 65 KB |
| 202 | Hex Screw GradeAB_DIN(DIN EN 24017 - M10 x 45-N).sldprt | 67.5 KB |
| 203 | Hex Screw GradeAB_DIN(DIN EN 24017 - M12 x 50-N).sldprt | 67.5 KB |
| 204 | Hex Screw GradeAB_DIN(DIN EN 24017 - M16 x 60-N).sldprt | 68 KB |
| 205 | Hex Screw GradeAB_DIN(DIN EN 24017 - M6 x 12-N)-2-1.sldprt | 69 KB |
| 206 | Hex Screw GradeAB_DIN(DIN EN 24017 - M6 x 12-N)-2.sldprt | 69 KB |
| 207 | Hex Screw GradeAB_DIN(DIN EN 24017 - M6 x 12-N)-3-1.sldprt | 69 KB |
| 208 | Hex Screw GradeAB_DIN(DIN EN 24017 - M6 x 12-N)-3.sldprt | 69 KB |
| 209 | Hex Screw GradeAB_DIN(DIN EN 24017 - M6 x 40-N).sldprt | 67 KB |
| 210 | Hex Screw GradeAB_DIN(DIN EN 24017 - M6 x 45-N).sldprt | 65.5 KB |
| 211 | Hex Screw GradeAB_DIN(DIN EN 24017 - M6 x 50-N).sldprt | 67 KB |
| 212 | Hex Thin Nut Chamfered GradeAB_DIN(Hexagon Thin Nut ISO 4035 - M16 - N).sldprt | 65.5 KB |
| 213 | ISO 100x100x3 00000001-2.stp.sldprt | 64 KB |
| 214 | ISO 100x100x3 00000001.stp.sldprt | 64 KB |
| 215 | ISO 100x100x3 00000002-3.stp.sldprt | 64 KB |
| 216 | ISO 100x100x3 00000002.stp.sldprt | 64 KB |
| 217 | ISO 100x100x3 00000004.stp.sldprt | 64.5 KB |
| 218 | ISO 100x100x3 00000005.stp.sldprt | 64.5 KB |
| 219 | ISO 60x60x3 00000003-4.stp.sldprt | 64 KB |
| 220 | ISO 60x60x3 00000003.stp.sldprt | 64 KB |
| 221 | ISO 60x60x3 00000004.stp.sldprt | 64.5 KB |
| 222 | Isolator Body(Default).sldprt | 71 KB |
| 223 | Isolator Lid.sldprt | 79 KB |
| 224 | Isolator-1.sldasm | 50.5 KB |
| 225 | Isolator.sldasm | 50.5 KB |
| 226 | Layout Implanta玢o Fatiador Batata-v18.09.19.sldasm | 41.5 KB |
| 227 | Local de montagem.sldasm | 95.5 KB |
| 228 | Lock Washer Spring Regular_AI(Regular LW 0.625).sldprt | 58 KB |
| 229 | M8 Nyloc Nut.sldprt | 69 KB |
| 230 | M8 Washer (Form A)(Washer M8).sldprt | 58.5 KB |
| 231 | MOTOR GEARBOX S.E.W. - CONVEYOR.sldasm | 60 KB |
| 232 | MOTOR GEARBOX S.E.W. - CUTTER.sldasm | 60 KB |
| 233 | Moega+transp inclin L3_Valor predeterminado_Como usinado_.sldprt | 144 KB |
| 234 | PRODUCT_NAME_1.sldprt | 159 KB |
| 235 | PRODUCT_NAME_12.sldprt | 91 KB |
| 236 | PRODUCT_NAME_2.sldprt | 89 KB |
| 237 | PRODUCT_NAME_3.sldprt | 72 KB |
| 238 | PRODUCT_NAME_4.sldprt | 68.5 KB |
| 239 | PRODUCT_NAME_5.sldprt | 68.5 KB |
| 240 | PRODUCT_NAME_8.sldprt | 81 KB |
| 241 | PRODUCT_NAME_9.sldprt | 69 KB |
| 242 | Picador + Tambor Lavagem L2_Valor predeterminado_Como usinado_.sldprt | 107 KB |
| 243 | Piso.sldprt | 62.5 KB |
| 244 | Plain Washer 6902 Type ABC_DIN(DIN 6902-A11).sldprt | 58 KB |
| 245 | Plain Washer 6902 Type ABC_DIN(DIN 6902-A5.5).sldprt | 57.5 KB |
| 246 | Plain Washer 6902 Type ABC_DIN(DIN 6902-A9.3).sldprt | 58 KB |
| 247 | Plain Washer Grade A_DIN(Washer DIN 125 - A 17).sldprt | 57.5 KB |
| 248 | Plain Washer Grade A_DIN(Washer DIN 125 - B 17).sldprt | 58 KB |
| 249 | Plataforma Linha 2_Valor predeterminado_Como usinado_.sldprt | 308 KB |
| 250 | Plataforma Met醠ica.sldasm | 55 KB |
| 251 | P髍tico-L1000_Valor predeterminado_Como usinado_.sldprt | 81 KB |
| 252 | P髍tico-L1155_Valor predeterminado_Como usinado_.sldprt | 81 KB |
| 253 | SA67_TDRE90L4BE2cf0abcc6-f2e8-46b0-86ad-a47fad390292_AP214_MIR3.stp.sldprt | 416 KB |
| 254 | SFT40 BRG.stp.sldprt | 62 KB |
| 255 | ST35 BRG.stp.sldprt | 67 KB |
| 256 | Spray Nozzle -FM-0902061.sldprt | 64 KB |
| 257 | Spray Nozzle-FM-0902047.sldprt | 64.5 KB |
| 258 | Standard_level sensor brkt2.stp.sldasm | 60.5 KB |
| 259 | Std handle-0.stp.sldprt | 59.5 KB |
| 260 | Std handle.stp.sldprt | 59.5 KB |
| 261 | StudBoltMFS_DIN(DIN 976-2 -- MFS M16 x 160 --- N).sldprt | 57 KB |
| 262 | Tee - Equal (Configs)(1).sldprt | 78.5 KB |
| 263 | Weld Union (BSP).sldprt | 61.5 KB |
| 264 | connector.sldprt | 60.5 KB |
| 265 | prevailing torque nut style 1 insert_DIN(DIN EN ISO 7040 - M10 - N).sldprt | 68.5 KB |
| 266 | prevailing torque nut style 1 insert_DIN(DIN EN ISO 7040 - M12 - N).sldprt | 70 KB |
| 267 | prevailing torque nut style 1 insert_DIN(DIN EN ISO 7040 - M16 - N).sldprt | 70 KB |
| 268 | prevailing torque nut style 1 insert_DIN(DIN EN ISO 7040 - M6 - N).sldprt | 68.5 KB |
| 269 | s1700_14t_170mmpd_1-5in_sq_ultra_abrasion_resistant.stp.sldprt | 86 KB |
| 270 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 271 | 公众号免费下载.jpg | 79 KB |
| 272 | 番薯加工流水线（设备）设计模型.SLDASM | 7.36 MB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
免费下载
此图纸可免费下载
图纸ID：542838
文件大小：21.72M
软件版本：SOLIDWORKS 2010
图纸格式：sldprt,sldasm
参数/编辑：可修改，包括参数
上传时间：2023-06-22
图纸介绍：
发布者
屿双网小匠
作品: 13827
粉丝: 65
提示
×
下载该图档需要消耗0金币！
确认下载
客服
签到
分享
