微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
套膜封切机（ID:554987）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | 06460-0051x20.sldprt | 237 KB |
| 3 | 15125_01.sldprt | 66.5 KB |
| 4 | 15125_02.sldprt | 192 KB |
| 5 | 15313_01.sldprt | 295 KB |
| 6 | 15313_02.sldprt | 231 KB |
| 7 | 15313_03.sldprt | 327 KB |
| 8 | 1800700.SLDPRT | 167 KB |
| 9 | 1908311 DSNU-25-150-P---(A----0-ZR).sldprt | 264 KB |
| 10 | 1908311 DSNU-25-150-P---(A---00--0-KS).sldprt | 114 KB |
| 11 | 193992 DSNU-32-50-P---(-----0-ZR).sldprt | 257 KB |
| 12 | 193992 DSNU-32-50-P---(----00--0-KS).sldprt | 109 KB |
| 13 | 193993 DSNU-40-125-P---(-----0-ZR).sldprt | 257 KB |
| 14 | 193993 DSNU-40-125-P---(----00--0-KS).sldprt | 109 KB |
| 15 | 1st belt emergency stop case 1.sldprt | 125 KB |
| 16 | 1st belt emergency stop case 2.sldprt | 231 KB |
| 17 | 1st belt item positioning support.sldprt | 87.5 KB |
| 18 | 1st belt positioning support.sldprt | 92 KB |
| 19 | 20160115-013110-61744612.sldasm | 54.5 KB |
| 20 | 20160127-091910-05692052.sldasm | 54.5 KB |
| 21 | 2nd belt entry shaft.sldprt | 68 KB |
| 22 | 2nd belt foil shaft and gear support 1.sldprt | 217 KB |
| 23 | 2nd belt foil shaft and gear support 2.sldprt | 125 KB |
| 24 | 2nd belt frame support.sldprt | 102 KB |
| 25 | 2nd belt piston height rod.sldprt | 62 KB |
| 26 | 2nd belt shaft support.sldprt | 82 KB |
| 27 | 2nd belt.sldprt | 84 KB |
| 28 | 2nd motor support 110mm (2).sldprt | 85 KB |
| 29 | 2nd motor support 110mm.sldprt | 85 KB |
| 30 | 2nd motor support 180mm.sldprt | 85 KB |
| 31 | 35-b_10.sldprt | 252 KB |
| 32 | 35-b_15 (15mm hole).sldprt | 333 KB |
| 33 | 35-b_15 (2).sldprt | 315 KB |
| 34 | 35-b_15 (20mm hole).sldprt | 333 KB |
| 35 | 35-b_15.sldprt | 359 KB |
| 36 | 3753 M30x1_5.sldprt | 114 KB |
| 37 | 3763 M38x1_5.sldprt | 125 KB |
| 38 | 3rd belt jaw cabling box cover.sldprt | 144 KB |
| 39 | 3rd belt jaw cabling box.sldprt | 122 KB |
| 40 | 3rd belt orientation 1.sldprt | 93.5 KB |
| 41 | 3rd belt orientation 2.sldprt | 104 KB |
| 42 | 3rd belt stretcher 1.sldprt | 68 KB |
| 43 | 3rd belt support 1.sldprt | 134 KB |
| 44 | 3rd belt support 1_MIR.sldprt | 134 KB |
| 45 | 3rd belt support 2.sldprt | 167 KB |
| 46 | 3rd belt support 2_MIR.sldprt | 171 KB |
| 47 | 3rd belt support 4.sldprt | 179 KB |
| 48 | 3rd belt support 5.sldprt | 179 KB |
| 49 | 40x125 FESTO Piston support.sldprt | 72 KB |
| 50 | 45-2c36_1820_000.sldprt | 380 KB |
| 51 | 46384.sldprt | 326 KB |
| 52 | 54-1-3030_01.sldprt | 137 KB |
| 53 | 54-1-3030_01_MIR1.sldprt | 137 KB |
| 54 | 54-1-3030_01_MIR2.sldprt | 137 KB |
| 55 | 54-1-3030_02.sldprt | 139 KB |
| 56 | 54-1-3030_02_MIR1.sldprt | 139 KB |
| 57 | 54-1-3030_02_MIR2.sldprt | 139 KB |
| 58 | 6382050.sldprt | 583 KB |
| 59 | 6382050_MIR.sldprt | 581 KB |
| 60 | 6382050_MIR1.sldprt | 581 KB |
| 61 | 72-1-4212_01.sldprt | 106 KB |
| 62 | 72-1-4212_02.sldprt | 68.5 KB |
| 63 | 72-1-4212_03.sldprt | 68.5 KB |
| 64 | 72-1-4212_04.sldprt | 126 KB |
| 65 | 72-1-4212_05.sldprt | 116 KB |
| 66 | 95020-10040.sldprt | 326 KB |
| 67 | 95020-10040_MIR.sldprt | 326 KB |
| 68 | 95020-10040_MIR1.sldprt | 326 KB |
| 69 | 95020-10040_MIR_MIR.sldprt | 326 KB |
| 70 | AC20A-F02CG.sldasm | 55.5 KB |
| 71 | Azbil HP100-R1 Sensor.sldprt | 89 KB |
| 72 | Azbil HP100-R1 Sensor_MIR.sldprt | 89 KB |
| 73 | Azbil HP100-R1 Sensor_MIR1.sldprt | 89 KB |
| 74 | Azbil Sensor for the entering products.sldasm | 62.5 KB |
| 75 | Azbil Sensor for the entering products_MIR.sldasm | 62.5 KB |
| 76 | Azbil Sensor holder.sldprt | 102 KB |
| 77 | Azbil Sensor holder_MIR.sldprt | 102 KB |
| 78 | Azbil sensor holder for 1st belt.sldprt | 102 KB |
| 79 | Azbil sensor holder for 1st belt_MIR.sldprt | 102 KB |
| 80 | Chain Drive1.sldasm | 56.5 KB |
| 81 | Chain Drive4.sldasm | 56.5 KB |
| 82 | Chain Drive4_DATAKIT_1945.sldasm | 53.5 KB |
| 83 | Chain Drive5.sldasm | 56 KB |
| 84 | Chain Drive5_DATAKIT_1977.sldasm | 53.5 KB |
| 85 | Chain Drive6.sldasm | 53 KB |
| 86 | Chain Drive7.sldasm | 53 KB |
| 87 | Chain Drive8.sldasm | 54.5 KB |
| 88 | Chain Drive9.sldasm | 57 KB |
| 89 | Chain Stretching Apparatus.sldprt | 107 KB |
| 90 | Chain Tail Dual-Flange Solenoid Clutch and Brake Assembly.sldprt | 170 KB |
| 91 | Chain Tail Electromagnetic Couple.sldprt | 153 KB |
| 92 | Compress Spring1.sldasm | 53 KB |
| 93 | Compress Spring11.sldprt | 193 KB |
| 94 | Compress Spring12.sldprt | 193 KB |
| 95 | Compress Spring13.sldprt | 275 KB |
| 96 | Compress Spring2.sldasm | 53 KB |
| 97 | Compress Spring3.sldasm | 53 KB |
| 98 | Counterweight Base.sldprt | 93 KB |
| 99 | Counterweight Rod.sldprt | 62 KB |
| 100 | Counterweight on Foil Feeder.sldasm | 58.5 KB |
| 101 | Counterweight.sldprt | 67.5 KB |
| 102 | DIN 128 - A3.sldprt | 80 KB |
| 103 | DIN 128 - A4.sldprt | 82 KB |
| 104 | DIN 128 - A5.sldprt | 82 KB |
| 105 | DIN 128 - A6.sldprt | 82 KB |
| 106 | DIN 471 - 10x1.sldprt | 93.5 KB |
| 107 | DIN 471 - 12x1.sldprt | 93.5 KB |
| 108 | DIN 471 - 15x1.sldprt | 93.5 KB |
| 109 | DIN 471 - 20x1,2.sldprt | 93.5 KB |
| 110 | DIN 471 - 25x1,2.sldprt | 93.5 KB |
| 111 | DIN 471 - 6x0,7.sldprt | 85 KB |
| 112 | DIN 472 - 10 x 1.sldprt | 85 KB |
| 113 | DIN 472 - 15 x 1.sldprt | 85 KB |
| 114 | DIN 472 - 16 x 1.sldprt | 85 KB |
| 115 | DIN 472 - 22 x 1.sldprt | 85 KB |
| 116 | DIN 6796 - 6.sldprt | 72 KB |
| 117 | DIN 6885 - A 4 x 4 x 28.sldprt | 67.5 KB |
| 118 | DIN 6885 - A 4 x 4 x 36.sldprt | 67.5 KB |
| 119 | DIN 986 - M8 x 1,25.sldprt | 131 KB |
| 120 | DIN 986 - M8 x 1.25.sldprt | 131 KB |
| 121 | DIN EN ISO 4017 - M6 x 20.sldprt | 107 KB |
| 122 | DIN EN ISO 4017 - M8 x 20.sldprt | 107 KB |
| 123 | DIN EN ISO 4032 - M5.sldprt | 99 KB |
| 124 | DIN EN ISO 4032 - M8.sldprt | 99 KB |
| 125 | DIN EN ISO 4762 - M6 x 20.sldprt | 106 KB |
| 126 | DIN-439-B - M10x1_25(F).sldprt | 102 KB |
| 127 | DIN-439-B - M10x1_25(F)_DATAKIT_1545.sldprt | 102 KB |
| 128 | DIN-439-B - M12x1_25(F).sldprt | 102 KB |
| 129 | DIN-439-B - M22x1_5(F).sldprt | 102 KB |
| 130 | DOP-B05.sldprt | 28.2 MB |
| 131 | Digital Screen Control.sldasm | 88.5 KB |
| 132 | E3X_DA11_S.sldasm | 57.5 KB |
| 133 | E3X_DA11_S_BASE.sldprt | 1.63 MB |
| 134 | E3X_DA11_S_COVER.sldprt | 230 KB |
| 135 | E3X_DA11_S_LEVER.sldprt | 110 KB |
| 136 | E3X_DA11_S_SLIDER.sldprt | 86.5 KB |
| 137 | EFOM-12.sldasm | 54 KB |
| 138 | Electric panel door.sldprt | 265 KB |
| 139 | Exiting Belt.sldprt | 150 KB |
| 140 | Extension Spring1.sldasm | 53 KB |
| 141 | Extension Spring11.sldprt | 161 KB |
| 142 | Extension Spring11_DATAKIT_1608.sldprt | 67 KB |
| 143 | Extension Spring1_DATAKIT_1607.sldasm | 53.5 KB |
| 144 | Flat pulley 1.sldprt | 91.5 KB |
| 145 | Green Light.sldprt | 61.5 KB |
| 146 | Grooved Pulley 1.sldprt | 84.5 KB |
| 147 | Hanmark 15W 4P Motor.sldprt | 136 KB |
| 148 | Hanmark 40W 4P Motor.sldprt | 144 KB |
| 149 | Hanmark motor shaft.sldprt | 75.5 KB |
| 150 | Heat Resistant Plastic for Knife.sldprt | 76.5 KB |
| 151 | IS 2995 - C12.sldprt | 125 KB |
| 152 | ISO 10642 - M4 x 12.sldprt | 98.5 KB |
| 153 | ISO 10642 - M4 x 8.sldprt | 98.5 KB |
| 154 | ISO 10642 - M6 x 10.sldprt | 98 KB |
| 155 | ISO 10642 - M6 x 12.sldprt | 98 KB |
| 156 | ISO 2491 - A 5 x 3 x 20.sldprt | 83.5 KB |
| 157 | ISO 2491 - A 6 x 4 x 22.sldprt | 83.5 KB |
| 158 | ISO 2491 - A 6 x 4 x 25.sldprt | 83.5 KB |
| 159 | ISO 4015 - M8 x 70.sldprt | 119 KB |
| 160 | ISO 4017 - M10 x 20 - ISO.sldprt | 107 KB |
| 161 | ISO 4017 - M4 x 8 - ISO.sldprt | 107 KB |
| 162 | ISO 4017 - M5 x 16 - ISO.sldprt | 107 KB |
| 163 | ISO 4017 - M6 x 16 - ISO.sldprt | 107 KB |
| 164 | ISO 4017 - M8 x 16 - ISO.sldprt | 107 KB |
| 165 | ISO 4019 - 30x30x3 - 1040.sldprt | 93.5 KB |
| 166 | ISO 4019 - 60x40x3 - 325.sldprt | 96.5 KB |
| 167 | ISO 4019 - 60x40x3 - 470.sldprt | 112 KB |
| 168 | ISO 4019 - 60x40x3 - 780 (2).sldprt | 125 KB |
| 169 | ISO 4019 - 60x40x3 - 780.sldprt | 93 KB |
| 170 | ISO 4019 - 60x40x3 - 80.sldprt | 96.5 KB |
| 171 | ISO 4019 - 60x60x3 - 1200 (2).sldprt | 162 KB |
| 172 | ISO 4019 - 60x60x3 - 1200.sldprt | 145 KB |
| 173 | ISO 4019 - 60x60x3 - 2180.sldprt | 121 KB |
| 174 | ISO 4019 - 60x60x3 - 2300 (3).sldprt | 122 KB |
| 175 | ISO 4019 - 60x60x3 - 2300 (up) (2).sldprt | 159 KB |
| 176 | ISO 4019 - 60x60x3 - 2300 (up).sldprt | 266 KB |
| 177 | ISO 4019 - 60x60x3 - 2300.sldprt | 98 KB |
| 178 | ISO 4019 - 60x60x3 - 360.sldprt | 93 KB |
| 179 | ISO 4019 - 60x60x3 - 520.sldprt | 112 KB |
| 180 | ISO 4019 - 60x60x3 - 580 (2).sldprt | 110 KB |
| 181 | ISO 4019 - 60x60x3 - 580.sldprt | 128 KB |
| 182 | ISO 4019 - 60x60x3 - 640 (2).sldprt | 116 KB |
| 183 | ISO 4019 - 60x60x3 - 640.sldprt | 140 KB |
| 184 | ISO 4019 - 60x60x3 - 780 (2).sldprt | 149 KB |
| 185 | ISO 4019 - 60x60x3 - 780 (3).sldprt | 112 KB |
| 186 | ISO 4019 - 60x60x3 - 780 (4).sldprt | 112 KB |
| 187 | ISO 4019 - 60x60x3 - 780 (5).sldprt | 112 KB |
| 188 | ISO 4019 - 60x60x3 - 780 (6).sldprt | 162 KB |
| 189 | ISO 4019 - 60x60x3 - 780.sldprt | 149 KB |
| 190 | ISO 4019 - 60x60x3 - 920 (2).sldprt | 166 KB |
| 191 | ISO 4019 - 60x60x3 - 920.sldprt | 167 KB |
| 192 | ISO 4019 - 60x60x3 - 980 (2).sldprt | 161 KB |
| 193 | ISO 4019 - 60x60x3 - 980.sldprt | 151 KB |
| 194 | ISO 4026 - M2 x 2 - ISO.sldprt | 94 KB |
| 195 | ISO 4026 - M2 x 5 - ISO.sldprt | 94 KB |
| 196 | ISO 4026 - M3 x 2.5 - ISO.sldprt | 94.5 KB |
| 197 | ISO 4026 - M3 x 6 - ISO.sldprt | 94 KB |
| 198 | ISO 4026 - M6 x 5 - ISO.sldprt | 94 KB |
| 199 | ISO 4032 - M20 - ISO.sldprt | 99 KB |
| 200 | ISO 4032 - M3 - ISO.sldprt | 99 KB |
| 201 | ISO 4032 - M4 - ISO.sldprt | 99 KB |
| 202 | ISO 4032 - M5 - ISO.sldprt | 99 KB |
| 203 | ISO 4032 - M6 - ISO.sldprt | 99 KB |
| 204 | ISO 4033 - M8 - ISO.sldprt | 99 KB |
| 205 | ISO 4762 - M2,5 x 16ISO.sldprt | 106 KB |
| 206 | ISO 4762 - M3 x 10ISO.sldprt | 106 KB |
| 207 | ISO 4762 - M3 x 16ISO.sldprt | 106 KB |
| 208 | ISO 4762 - M3 x 5ISO.sldprt | 106 KB |
| 209 | ISO 4762 - M3 x 6ISO.sldprt | 106 KB |
| 210 | ISO 4762 - M4 x 10ISO.sldprt | 106 KB |
| 211 | ISO 4762 - M4 x 12ISO.sldprt | 106 KB |
| 212 | ISO 4762 - M4 x 16ISO.sldprt | 106 KB |
| 213 | ISO 4762 - M4 x 20ISO.sldprt | 106 KB |
| 214 | ISO 4762 - M4 x 30ISO.sldprt | 106 KB |
| 215 | ISO 4762 - M4 x 35ISO.sldprt | 106 KB |
| 216 | ISO 4762 - M4 x 6ISO.sldprt | 106 KB |
| 217 | ISO 4762 - M5 x 10ISO.sldprt | 106 KB |
| 218 | ISO 4762 - M5 x 12ISO.sldprt | 106 KB |
| 219 | ISO 4762 - M5 x 16ISO.sldprt | 106 KB |
| 220 | ISO 4762 - M5 x 20ISO.sldprt | 106 KB |
| 221 | ISO 4762 - M5 x 25ISO.sldprt | 106 KB |
| 222 | ISO 4762 - M5 x 50ISO.sldprt | 106 KB |
| 223 | ISO 4762 - M5 x 8ISO.sldprt | 106 KB |
| 224 | ISO 4762 - M6 x 10ISO.sldprt | 106 KB |
| 225 | ISO 4762 - M6 x 12ISO.sldprt | 106 KB |
| 226 | ISO 4762 - M6 x 16ISO.sldprt | 106 KB |
| 227 | ISO 4762 - M6 x 20ISO.sldprt | 106 KB |
| 228 | ISO 4762 - M6 x 25ISO.sldprt | 106 KB |
| 229 | ISO 4762 - M6 x 30ISO.sldprt | 106 KB |
| 230 | ISO 4762 - M6 x 35ISO.sldprt | 106 KB |
| 231 | ISO 4762 - M6 x 40ISO.sldprt | 106 KB |
| 232 | ISO 4762 - M6 x 50ISO.sldprt | 106 KB |
| 233 | ISO 4762 - M6 x 55ISO.sldprt | 106 KB |
| 234 | ISO 4762 - M6 x 60ISO.sldprt | 106 KB |
| 235 | ISO 4762 - M8 x 20ISO.sldprt | 106 KB |
| 236 | ISO 4762 - M8 x 25ISO.sldprt | 106 KB |
| 237 | ISO 4762 - M8 x 30ISO.sldprt | 106 KB |
| 238 | ISO 657_14 - 60x60x3 - 360 Transformer Support.sldprt | 93 KB |
| 239 | ISO 657_14 - 60x60x3 - 780 (2).sldprt | 130 KB |
| 240 | ISO 7045 - M6 x 55 - 4.8 - H - ISO.sldprt | 171 KB |
| 241 | ISO 7091 - ST 4 - 100 HV.sldprt | 68.5 KB |
| 242 | ISO 7091 - ST 5 - 100 HV.sldprt | 68.5 KB |
| 243 | ISO 7091 - ST 6 - 100 HV.sldprt | 68.5 KB |
| 244 | ISO 7092 - ST 10 - 140 HV.sldprt | 68.5 KB |
| 245 | ISO 7092 - ST 22 - 140 HV.sldprt | 68.5 KB |
| 246 | ISO 7092 - ST 3 - 140 HV.sldprt | 68.5 KB |
| 247 | ISO 7092 - ST 4 - 140 HV.sldprt | 68.5 KB |
| 248 | ISO 7092 - ST 5 - 140 HV.sldprt | 68.5 KB |
| 249 | ISO 7092 - ST 6 - 140 HV.sldprt | 68.5 KB |
| 250 | ISO 7092 - ST 8 - 140 HV.sldprt | 68.5 KB |
| 251 | ISO 7094 - ST 5 - 100 HV.sldprt | 68.5 KB |
| 252 | ISO 7380-1 - M3 x 16.sldprt | 106 KB |
| 253 | ISO 7380-1 - M3 x 6.sldprt | 106 KB |
| 254 | ISO 7380-1 - M4 x 10.sldprt | 106 KB |
| 255 | ISO 7380-1 - M4 x 12.sldprt | 106 KB |
| 256 | ISO 7380-1 - M4 x 35.sldprt | 107 KB |
| 257 | ISO 7380-1 - M4 x 6.sldprt | 106 KB |
| 258 | ISO 7380-1 - M4 x 8.sldprt | 106 KB |
| 259 | ISO 7380-1 - M6 x 10.sldprt | 106 KB |
| 260 | ISO 7414 - M22.sldprt | 99 KB |
| 261 | ISO 8675 - M20 x 1.5 - ISO.sldprt | 99.5 KB |
| 262 | ISO 8675 - M8 x 1 - ISO.sldprt | 99.5 KB |
| 263 | ISO_R 1051 - 2 x 8 x 4.sldprt | 71 KB |
| 264 | ISO_R 1051 - 3 x 22 x 14.sldprt | 71 KB |
| 265 | Item Positioning.sldasm | 62 KB |
| 266 | Item Positioning_Welds.sldprt | 128 KB |
| 267 | Jaw motion support.sldprt | 110 KB |
| 268 | Kedu QKS8 door safety switch.sldprt | 92.5 KB |
| 269 | Kedu QKS8 door safety switch_MIR.sldprt | 92.5 KB |
| 270 | Key Connection1.sldasm | 53 KB |
| 271 | Key Connection10.sldasm | 53 KB |
| 272 | Key Connection2.sldasm | 53 KB |
| 273 | Key Connection3.sldasm | 53 KB |
| 274 | Key Connection4.sldasm | 53 KB |
| 275 | Key Connection5.sldasm | 53 KB |
| 276 | Key Connection7.sldasm | 53 KB |
| 277 | Key Connection8.sldasm | 53 KB |
| 278 | Knife Support 1.sldprt | 89 KB |
| 279 | Knife Support 2.sldprt | 144 KB |
| 280 | Knife Support 3.sldprt | 143 KB |
| 281 | Knife and jaw protector.sldprt | 280 KB |
| 282 | Knife.sldasm | 73.5 KB |
| 283 | Knife.sldprt | 101 KB |
| 284 | LS Rotary Encoder Device Height Support on the 3rd belt.sldprt | 105 KB |
| 285 | LS Rotary Encoder Device Holder on the 2nd belt frame.sldprt | 137 KB |
| 286 | LS Rotary Encoder Device Holder on the 3rd belt.sldprt | 120 KB |
| 287 | LS Rotary Encoder S40 Series 6mm shaft size.sldprt | 125 KB |
| 288 | LS Rotary Encoder to Shaft Connection 1.sldprt | 82.5 KB |
| 289 | LS Rotary Encoder to Shaft Connection 2.sldprt | 81 KB |
| 290 | Leg and wheel support.sldprt | 69.5 KB |
| 291 | Leg and wheel support_MIR.sldprt | 69.5 KB |
| 292 | Leg and wheel support_MIR1.sldprt | 69.5 KB |
| 293 | Leg and wheel support_MIR_MIR.sldprt | 69.5 KB |
| 294 | MSC-10-SS.sldprt | 145 KB |
| 295 | Magnet for window frames.sldasm | 56.5 KB |
| 296 | NK_12_40_01_600_2.sldasm | 54.5 KB |
| 297 | NK_12_40_01_600_2_1.sldprt | 203 KB |
| 298 | NK_12_40_01_600_2_2.sldprt | 238 KB |
| 299 | NW_12_40_1.sldasm | 52 KB |
| 300 | NW_12_40_1.sldprt | 203 KB |
| 301 | OMRON E5CZ Digital Temperature Controllers.sldprt | 77.5 KB |
| 302 | OMRON Z-15GQ22-B Activater.sldprt | 78.5 KB |
| 303 | OMRON Z-15GQ22-B Holder.sldprt | 89.5 KB |
| 304 | OMRON Z_15GQ22_B.sldasm | 57.5 KB |
| 305 | OMRON Z_15GW22_B Limit Switch.sldasm | 55 KB |
| 306 | Omron switch on the jaw.sldprt | 114 KB |
| 307 | Omron switch on the jaw_MIR.sldprt | 115 KB |
| 308 | Orange Light.sldprt | 61.5 KB |
| 309 | PRODUCT_NAME_1.sldprt | 113 KB |
| 310 | PRODUCT_NAME_2.sldprt | 742 KB |
| 311 | Plastic End Stopper TE-002 35mm.sldprt | 67.5 KB |
| 312 | RS 120mm Axial Fan with Sleeve and Guard Grill.sldasm | 56.5 KB |
| 313 | Red Light.sldprt | 61.5 KB |
| 314 | Reduction motor support for the exiting belt.sldprt | 68 KB |
| 315 | Reeler frame 1.sldprt | 134 KB |
| 316 | Reeler frame 2.sldprt | 115 KB |
| 317 | Roller Chain Sprocket11.sldprt | 628 KB |
| 318 | Roller Chain Sprocket14.sldprt | 660 KB |
| 319 | Roller Chain Sprocket14_DATAKIT_2323.sldprt | 576 KB |
| 320 | Roller Chain Sprocket15.sldprt | 660 KB |
| 321 | Roller Chain Sprocket22.sldprt | 567 KB |
| 322 | Roller Chain Sprocket24.sldprt | 531 KB |
| 323 | Roller Chain Sprocket25.sldprt | 652 KB |
| 324 | Roller Chain Sprocket25_DATAKIT_2325.sldprt | 523 KB |
| 325 | Roller Chain Sprocket26.sldprt | 652 KB |
| 326 | Roller Chain1.sldprt | 160 KB |
| 327 | Roller Chain4.sldprt | 160 KB |
| 328 | Roller Chain4_DATAKIT_1946.sldprt | 206 KB |
| 329 | Roller Chain5.sldprt | 160 KB |
| 330 | Roller Chain5_DATAKIT_1978.sldprt | 206 KB |
| 331 | Roller Chain6.sldprt | 205 KB |
| 332 | Roller Chain7.sldprt | 205 KB |
| 333 | Roller Chain8.sldprt | 205 KB |
| 334 | Roller Chain9.sldprt | 205 KB |
| 335 | SAD-2016C.sldprt | 91.5 KB |
| 336 | SICK IM12-04NNS-ZW1-Order no_6011976 Inductive proximity sensors (2).sldasm | 58 KB |
| 337 | SICK IM12-04NNS-ZW1-Order no_6011976 Inductive proximity sensors (24mm away).sldasm | 59 KB |
| 338 | SICK IM12-04NNS-ZW1-Order no_6011976 Inductive proximity sensors (3).sldasm | 58 KB |
| 339 | SICK IM12-04NNS-ZW1-Order no_6011976 Inductive proximity sensors.sldasm | 58 KB |
| 340 | SICK IM12-04NNS-ZW1-Order no_6011976-1.sldprt | 107 KB |
| 341 | SICK Mutter M12x1(174).sldprt | 120 KB |
| 342 | SICK sensor holder.sldprt | 102 KB |
| 343 | SKF Z6200-Z.sldprt | 197 KB |
| 344 | SKF Z6202-Z.sldprt | 229 KB |
| 345 | SKF Z6203-Z.sldprt | 228 KB |
| 346 | SKF Z6300-Z.sldprt | 199 KB |
| 347 | SKF16004.sldprt | 228 KB |
| 348 | SKF61800.sldprt | 244 KB |
| 349 | SKF61801.sldprt | 278 KB |
| 350 | SKF61804.sldprt | 292 KB |
| 351 | SKF61901.sldprt | 246 KB |
| 352 | SKF61907.sldprt | 308 KB |
| 353 | SKF626.sldprt | 198 KB |
| 354 | Shaft1.sldasm | 51.5 KB |
| 355 | Shaft1.sldprt | 102 KB |
| 356 | Shaft10.sldasm | 51.5 KB |
| 357 | Shaft10.sldprt | 87 KB |
| 358 | Shaft10_DATAKIT_1013.sldasm | 53 KB |
| 359 | Shaft10_DATAKIT_1014.sldprt | 122 KB |
| 360 | Shaft11.sldasm | 51.5 KB |
| 361 | Shaft11.sldprt | 74.5 KB |
| 362 | Shaft11_DATAKIT_1101.sldasm | 53 KB |
| 363 | Shaft11_DATAKIT_1102.sldprt | 113 KB |
| 364 | Shaft12.sldasm | 51.5 KB |
| 365 | Shaft12.sldprt | 69 KB |
| 366 | Shaft12_DATAKIT_1167.sldasm | 53 KB |
| 367 | Shaft12_DATAKIT_1168.sldprt | 61.5 KB |
| 368 | Shaft13.sldasm | 51.5 KB |
| 369 | Shaft13.sldprt | 104 KB |
| 370 | Shaft13_DATAKIT_1235.sldasm | 53 KB |
| 371 | Shaft13_DATAKIT_1236.sldprt | 96.5 KB |
| 372 | Shaft14.sldasm | 51.5 KB |
| 373 | Shaft14.sldprt | 91.5 KB |
| 374 | Shaft14_DATAKIT_1255.sldasm | 53 KB |
| 375 | Shaft14_DATAKIT_1256.sldprt | 67.5 KB |
| 376 | Shaft15.sldasm | 51.5 KB |
| 377 | Shaft15.sldprt | 123 KB |
| 378 | Shaft15_DATAKIT_1326.sldasm | 53 KB |
| 379 | Shaft15_DATAKIT_1327.sldprt | 79.5 KB |
| 380 | Shaft16.sldasm | 51.5 KB |
| 381 | Shaft16.sldprt | 112 KB |
| 382 | Shaft16_DATAKIT_1393.sldasm | 53 KB |
| 383 | Shaft16_DATAKIT_1394.sldprt | 143 KB |
| 384 | Shaft17.sldasm | 51.5 KB |
| 385 | Shaft17.sldprt | 87 KB |
| 386 | Shaft17_DATAKIT_1399.sldasm | 53 KB |
| 387 | Shaft17_DATAKIT_1400.sldprt | 87.5 KB |
| 388 | Shaft18.sldasm | 51.5 KB |
| 389 | Shaft18.sldprt | 67 KB |
| 390 | Shaft18_DATAKIT_1412.sldasm | 53 KB |
| 391 | Shaft18_DATAKIT_1413.sldprt | 91.5 KB |
| 392 | Shaft19.sldasm | 51.5 KB |
| 393 | Shaft19.sldprt | 93.5 KB |
| 394 | Shaft19_DATAKIT_1438.sldasm | 53 KB |
| 395 | Shaft19_DATAKIT_1439.sldprt | 69.5 KB |
| 396 | Shaft1_DATAKIT_1767.sldasm | 53 KB |
| 397 | Shaft1_DATAKIT_1768.sldprt | 67.5 KB |
| 398 | Shaft1_DATAKIT_790.sldasm | 53 KB |
| 399 | Shaft1_DATAKIT_791.sldprt | 74.5 KB |
| 400 | Shaft2.sldasm | 51.5 KB |
| 401 | Shaft2.sldprt | 87 KB |
| 402 | Shaft20.sldasm | 51.5 KB |
| 403 | Shaft20.sldprt | 93 KB |
| 404 | Shaft20_DATAKIT_1444.sldasm | 53 KB |
| 405 | Shaft20_DATAKIT_1445.sldprt | 62 KB |
| 406 | Shaft21.sldasm | 51.5 KB |
| 407 | Shaft21.sldprt | 73 KB |
| 408 | Shaft21_DATAKIT_1516.sldasm | 53 KB |
| 409 | Shaft21_DATAKIT_1517.sldprt | 74.5 KB |
| 410 | Shaft22.sldasm | 51.5 KB |
| 411 | Shaft22.sldprt | 69 KB |
| 412 | Shaft22_DATAKIT_1714.sldasm | 53 KB |
| 413 | Shaft22_DATAKIT_1715.sldprt | 62 KB |
| 414 | Shaft23.sldasm | 51.5 KB |
| 415 | Shaft23.sldprt | 61.5 KB |
| 416 | Shaft24.sldasm | 51.5 KB |
| 417 | Shaft24.sldprt | 69 KB |
| 418 | Shaft24_DATAKIT_1726.sldasm | 53 KB |
| 419 | Shaft24_DATAKIT_1727.sldprt | 99.5 KB |
| 420 | Shaft25.sldasm | 51.5 KB |
| 421 | Shaft25.sldprt | 71 KB |
| 422 | Shaft25_DATAKIT_1805.sldasm | 53 KB |
| 423 | Shaft25_DATAKIT_1806.sldprt | 87.5 KB |
| 424 | Shaft26.sldasm | 51.5 KB |
| 425 | Shaft26.sldprt | 74.5 KB |
| 426 | Shaft26_DATAKIT_1923.sldasm | 53 KB |
| 427 | Shaft26_DATAKIT_1924.sldprt | 74 KB |
| 428 | Shaft27.sldasm | 51.5 KB |
| 429 | Shaft27.sldprt | 87 KB |
| 430 | Shaft28.sldasm | 51.5 KB |
| 431 | Shaft28.sldprt | 80.5 KB |
| 432 | Shaft29.sldasm | 51.5 KB |
| 433 | Shaft29.sldprt | 85 KB |
| 434 | Shaft2_DATAKIT_765.sldasm | 53 KB |
| 435 | Shaft2_DATAKIT_766.sldprt | 61.5 KB |
| 436 | Shaft3.sldasm | 51.5 KB |
| 437 | Shaft3.sldprt | 99.5 KB |
| 438 | Shaft30.sldasm | 51.5 KB |
| 439 | Shaft30.sldprt | 87 KB |
| 440 | Shaft3_DATAKIT_133.sldasm | 53 KB |
| 441 | Shaft3_DATAKIT_134.sldprt | 87.5 KB |
| 442 | Shaft3_DATAKIT_778.sldasm | 53 KB |
| 443 | Shaft3_DATAKIT_779.sldprt | 86 KB |
| 444 | Shaft4.sldasm | 51.5 KB |
| 445 | Shaft4.sldprt | 87 KB |
| 446 | Shaft4_DATAKIT_795.sldasm | 53 KB |
| 447 | Shaft4_DATAKIT_796.sldprt | 68 KB |
| 448 | Shaft5.sldasm | 51.5 KB |
| 449 | Shaft5.sldprt | 99.5 KB |
| 450 | Shaft5_DATAKIT_168.sldasm | 53 KB |
| 451 | Shaft5_DATAKIT_169.sldprt | 75.5 KB |
| 452 | Shaft5_DATAKIT_823.sldasm | 53 KB |
| 453 | Shaft5_DATAKIT_824.sldprt | 109 KB |
| 454 | Shaft6.sldasm | 51.5 KB |
| 455 | Shaft6.sldprt | 87 KB |
| 456 | Shaft6_DATAKIT_827.sldasm | 53 KB |
| 457 | Shaft6_DATAKIT_828.sldprt | 67.5 KB |
| 458 | Shaft7.sldasm | 51.5 KB |
| 459 | Shaft7.sldprt | 61.5 KB |
| 460 | Shaft7_DATAKIT_831.sldasm | 53 KB |
| 461 | Shaft7_DATAKIT_832.sldprt | 69 KB |
| 462 | Shaft8.sldasm | 51.5 KB |
| 463 | Shaft8.sldprt | 87.5 KB |
| 464 | Shaft8_DATAKIT_843.sldasm | 53 KB |
| 465 | Shaft8_DATAKIT_844.sldprt | 99.5 KB |
| 466 | Shaft9.sldasm | 51.5 KB |
| 467 | Shaft9.sldprt | 99.5 KB |
| 468 | Shaft9_DATAKIT_950.sldasm | 53 KB |
| 469 | Shaft9_DATAKIT_951.sldprt | 74.5 KB |
| 470 | Spur Gear11.sldprt | 282 KB |
| 471 | Spur Gear21.sldprt | 285 KB |
| 472 | Spur Gears1.sldasm | 54.5 KB |
| 473 | Suenn Liang Electric Co Ltd Dry Type Transformer 4KVA 3AC.sldprt | 68.5 KB |
| 474 | Synchronous Belt3.sldprt | 75 KB |
| 475 | Synchronous Belts Transmission3.sldasm | 57 KB |
| 476 | Synchronous Pulley13.sldprt | 390 KB |
| 477 | Synchronous Pulley23.sldprt | 942 KB |
| 478 | TA-001A 35mm Aluminium DIN Rail.sldprt | 67.5 KB |
| 479 | Tend Buzzer TBY-302.sldprt | 81 KB |
| 480 | Tend Tower Light TPTL5.sldasm | 67.5 KB |
| 481 | Tocos RV24YN panel control.sldprt | 90 KB |
| 482 | Tocos securing panel.sldprt | 103 KB |
| 483 | Transformer Protector.sldprt | 635 KB |
| 484 | Transformer Support.sldprt | 118 KB |
| 485 | Transformer.sldasm | 59 KB |
| 486 | UP001 -Housing.sldprt | 272 KB |
| 487 | UP001J .sldasm | 53 KB |
| 488 | V-Belt transmission1.sldasm | 53 KB |
| 489 | V-Belt1.sldprt | 88 KB |
| 490 | White Light.sldprt | 61.5 KB |
| 491 | Z_15GQ22_B_ACTUATOR.sldprt | 81.5 KB |
| 492 | Z_15GQ22_B_BASE.sldprt | 163 KB |
| 493 | Z_15GQ22_B_NUT.sldprt | 75.5 KB |
| 494 | Z_15GW22_B_ACTUATOR.sldprt | 173 KB |
| 495 | Z_15GW22_B_BASE.sldprt | 139 KB |
| 496 | aluminium exiting belt support.sldprt | 103 KB |
| 497 | aluminium exiting belt support_MIR.sldprt | 103 KB |
| 498 | aluminium foil holder top shaft welded.sldprt | 73.5 KB |
| 499 | aluminium foil holder top shaft.sldprt | 79.5 KB |
| 500 | aluminium foil holder.sldasm | 59.5 KB |
| 501 | aluminium foil holder_Welds.sldprt | 72.5 KB |
| 502 | back panel of digital screen 2.sldprt | 85 KB |
| 503 | back panel of digital screen.sldprt | 241 KB |
| 504 | base sheet metal.sldprt | 67 KB |
| 505 | bed for plastic orientation 2nd belt.sldprt | 103 KB |
| 506 | belt 1 frame support (2).sldprt | 131 KB |
| 507 | belt 1 sprocket chain safe 2.sldprt | 209 KB |
| 508 | belt 1 sprocket chain safe.sldprt | 195 KB |
| 509 | belt 1 stretcher.sldprt | 88 KB |
| 510 | belt 2 box 1.sldprt | 135 KB |
| 511 | belt 2 box 2.sldprt | 226 KB |
| 512 | belt 2 orientation.sldprt | 85 KB |
| 513 | belt 2.sldprt | 93.5 KB |
| 514 | belt chain orientation 2.sldprt | 86 KB |
| 515 | belt chain orientation.sldprt | 80 KB |
| 516 | belt end curve.sldprt | 83.5 KB |
| 517 | belt frame 1.sldprt | 206 KB |
| 518 | belt frame 2.sldprt | 180 KB |
| 519 | belt frame 3.sldprt | 150 KB |
| 520 | belt frame 4.sldprt | 168 KB |
| 521 | belt frame support 2.sldprt | 97.5 KB |
| 522 | belt frame support.sldprt | 91 KB |
| 523 | belt orientation.sldprt | 173 KB |
| 524 | belt rubber support 2.sldprt | 68 KB |
| 525 | belt rubber support 3.sldprt | 68 KB |
| 526 | belt rubber support.sldprt | 68 KB |
| 527 | belt shaft housing.sldprt | 116 KB |
| 528 | belt shaft support frame.sldprt | 82 KB |
| 529 | belt shaft support frame_MIR.sldprt | 82 KB |
| 530 | belt shaft support.sldprt | 116 KB |
| 531 | bottom exit panel.sldprt | 368 KB |
| 532 | bottom foil reeler hook.sldprt | 77 KB |
| 533 | bottom gear support.sldprt | 103 KB |
| 534 | bottom jaw housing.sldprt | 92.5 KB |
| 535 | bottom jaw support.sldprt | 129 KB |
| 536 | bottom piston frame 2.sldprt | 120 KB |
| 537 | bottom piston frame.sldprt | 120 KB |
| 538 | bottom piston support 2.sldprt | 126 KB |
| 539 | bottom piston support 3.sldprt | 123 KB |
| 540 | bottom piston support 4.sldprt | 131 KB |
| 541 | bottom piston support.sldprt | 110 KB |
| 542 | bottom sensor and shaft holder.sldprt | 98.5 KB |
| 543 | c5-12-12-14.sldasm | 54 KB |
| 544 | c5-12-12-14_01.sldprt | 120 KB |
| 545 | c5-12-12-14_02.sldprt | 79.5 KB |
| 546 | c5-12-15-18.sldasm | 54 KB |
| 547 | c5-12-15-18_01.sldprt | 120 KB |
| 548 | c5-12-15-18_02.sldprt | 79.5 KB |
| 549 | corner bracket.sldprt | 110 KB |
| 550 | corner bracket_MIR.sldprt | 110 KB |
| 551 | couple gear orientation support.sldprt | 94 KB |
| 552 | custom washer.sldprt | 71.5 KB |
| 553 | digital screen frame.sldprt | 172 KB |
| 554 | digital screen linkage support 2.sldprt | 83 KB |
| 555 | digital screen linkage support 3.sldprt | 158 KB |
| 556 | digital screen linkage support 4.sldprt | 98.5 KB |
| 557 | digital screen linkage support.sldprt | 76.5 KB |
| 558 | digital screen support 1.sldprt | 97.5 KB |
| 559 | din_6336-ku-32-m6-k.sldprt | 489 KB |
| 560 | din_6336-ku-40-m8-k.sldprt | 494 KB |
| 561 | din_950-gg-200-b20-d.sldprt | 318 KB |
| 562 | din_950-gg-80-b12-f.sldprt | 273 KB |
| 563 | door safety switch holder.sldprt | 93 KB |
| 564 | door safety switch holder_MIR.sldprt | 93 KB |
| 565 | double belt orientator for 2nd belt.sldprt | 92 KB |
| 566 | electrical panel.sldprt | 368 KB |
| 567 | entrance window.sldprt | 125 KB |
| 568 | entry belt frame support 1.sldprt | 85 KB |
| 569 | entry belt frame support 2.sldprt | 85 KB |
| 570 | exiting belt chain stretcher.sldprt | 80 KB |
| 571 | exiting fan cover below.sldprt | 181 KB |
| 572 | exiting panel top window.sldprt | 573 KB |
| 573 | foil gatherer 2nd belt (2).sldprt | 68.5 KB |
| 574 | foil gatherer 2nd belt (3).sldprt | 68.5 KB |
| 575 | foil gatherer for 2nd belt.sldprt | 68 KB |
| 576 | foil motor and chain safe.sldprt | 235 KB |
| 577 | foil orientation aluminium hollow tube.sldprt | 68.5 KB |
| 578 | foil orientation support with belt.sldprt | 98 KB |
| 579 | foil orientation.sldprt | 125 KB |
| 580 | foil reeler.sldprt | 139 KB |
| 581 | foil reeler2.sldprt | 113 KB |
| 582 | foil shaft 1.sldprt | 88 KB |
| 583 | foil shaft 2.sldprt | 88 KB |
| 584 | foil shaft 3.sldprt | 88 KB |
| 585 | foil shaft support.sldprt | 262 KB |
| 586 | foil shaft support_MIR.sldprt | 357 KB |
| 587 | foil shaft with housing on top.sldprt | 62 KB |
| 588 | foil support.sldprt | 74.5 KB |
| 589 | foiling sheet metal.sldprt | 206 KB |
| 590 | front panel.sldprt | 216 KB |
| 591 | gap cover for synchronous belts.sldprt | 125 KB |
| 592 | hard bed for knife.sldprt | 67 KB |
| 593 | hard plastic cover on socket head fastener.sldprt | 68.5 KB |
| 594 | heated knife.sldprt | 152 KB |
| 595 | hole punch foil.sldprt | 333 KB |
| 596 | housing_sce_1_0_g_1.sldprt | 1.26 MB |
| 597 | inafag_kb20-pp_478pgvqae286iebu44hzhid26.sldprt | 144 KB |
| 598 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_01.sldprt | 125 KB |
| 599 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_02.sldprt | 125 KB |
| 600 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_03.sldprt | 94 KB |
| 601 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_04.sldprt | 94 KB |
| 602 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_05.sldprt | 86 KB |
| 603 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_06.sldprt | 113 KB |
| 604 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_07.sldprt | 113 KB |
| 605 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_08.sldprt | 174 KB |
| 606 | inafag_kue30-h_700_e6as8ztgruroasmajlothzejt_09.sldprt | 483 KB |
| 607 | jaw frame 1.sldprt | 121 KB |
| 608 | jaw frame 1_MIR.sldprt | 121 KB |
| 609 | jaw frame 2.sldprt | 144 KB |
| 610 | jaw frame 3.sldprt | 222 KB |
| 611 | jaw height adjustment rod.sldprt | 69.5 KB |
| 612 | jaw sensor holder.sldprt | 98.5 KB |
| 613 | jaw sensor support.sldprt | 127 KB |
| 614 | jaw support 1.sldprt | 189 KB |
| 615 | jaw support on the ball monorail guidance system.sldprt | 81 KB |
| 616 | jaw support on the ball monorail guidance system_MIR.sldprt | 81.5 KB |
| 617 | jaw weight and height support.sldprt | 154 KB |
| 618 | jaw weight and height support_MIR.sldprt | 154 KB |
| 619 | knife jaw height adjustment.sldprt | 62 KB |
| 620 | knife jaw support.sldprt | 125 KB |
| 621 | knife protector flush.sldprt | 75 KB |
| 622 | large window on the side.sldprt | 140 KB |
| 623 | linear carriage support for jaw.sldprt | 148 KB |
| 624 | linear carriage support for jaw_MIR.sldprt | 148 KB |
| 625 | linear motion of jaw support 1.sldprt | 91.5 KB |
| 626 | linear motion of jaw support 2.sldprt | 140 KB |
| 627 | linear motion of jaw support 3.sldprt | 81 KB |
| 628 | lm-119-60-20.sldprt | 3.38 MB |
| 629 | magnet holder.sldprt | 97.5 KB |
| 630 | magnet.sldprt | 69 KB |
| 631 | motor height.sldprt | 61.5 KB |
| 632 | mounting bracket.sldprt | 103 KB |
| 633 | nut_m8x1_25_din_582.sldprt | 103 KB |
| 634 | piston 2nd belt.sldprt | 74.5 KB |
| 635 | piston and frame support 2.sldprt | 94 KB |
| 636 | piston and frame support 3.sldprt | 137 KB |
| 637 | piston and frame support.sldprt | 99 KB |
| 638 | piston belt support.sldprt | 145 KB |
| 639 | piston high support.sldprt | 112 KB |
| 640 | piston support 2.sldprt | 89.5 KB |
| 641 | plastic foil shaft 2.sldprt | 68 KB |
| 642 | plastic foil shaft 3.sldprt | 339 KB |
| 643 | plastic foil shaft.sldprt | 68 KB |
| 644 | pos_25l.sldasm | 54 KB |
| 645 | pos_25l_01.sldprt | 79 KB |
| 646 | pos_25l_02.sldprt | 91 KB |
| 647 | rails and carriage.sldasm | 54.5 KB |
| 648 | reeler pulley 1.sldprt | 85.5 KB |
| 649 | reeler pulley 2.sldprt | 85.5 KB |
| 650 | reeler support 1.sldprt | 157 KB |
| 651 | reeler support 2.sldprt | 99.5 KB |
| 652 | reeler support 3.sldprt | 83.5 KB |
| 653 | reeler support 4 aluminium cover.sldprt | 88.5 KB |
| 654 | reeler support 4.sldprt | 133 KB |
| 655 | right angle triangle 1.sldprt | 126 KB |
| 656 | right angle triangle 2.sldprt | 113 KB |
| 657 | right angle triangle 3.sldprt | 117 KB |
| 658 | right angle triangle height adjustment (2).sldprt | 112 KB |
| 659 | right angle triangle height adjustment.sldprt | 131 KB |
| 660 | right angle triangle height support housing.sldprt | 131 KB |
| 661 | rod mid support.sldprt | 68.5 KB |
| 662 | rod support on sides.sldprt | 83.5 KB |
| 663 | rubber red stopper and orientator on foil feeder.sldprt | 68.5 KB |
| 664 | sensor holder on bottom reeler shaft.sldprt | 94 KB |
| 665 | sg-119-01.sldprt | 4.5 MB |
| 666 | shaft and reeler frame support.sldprt | 110 KB |
| 667 | shaft belt support.sldprt | 62 KB |
| 668 | shaft housing for belt support in the middle.sldprt | 118 KB |
| 669 | shrink wrapper machine.sldasm | 15 MB |
| 670 | shrink wrapper machine.sldprt-dtk.xml | 2.3 MB |
| 671 | shrink wrapper machine.stp | 67.6 MB |
| 672 | shrink wrapper machine_Welds.sldprt | 302 KB |
| 673 | spur gears and sprocket protector sheet metal.sldprt | 209 KB |
| 674 | stroeter_g00-56_b3-b.sldasm | 60 KB |
| 675 | stroeter_g00-56_b3-b_01.sldprt | 115 KB |
| 676 | stroeter_g00-56_b3-b_02.sldprt | 92 KB |
| 677 | stroeter_g00-56_b3-b_03.sldprt | 111 KB |
| 678 | stroeter_g00-56_b3-b_04.sldprt | 103 KB |
| 679 | stroeter_g00-56_b3-b_05.sldprt | 243 KB |
| 680 | stroeter_ks080_ma71_ad.sldasm | 61.5 KB |
| 681 | stroeter_ks080_ma71_ad_01.sldprt | 69 KB |
| 682 | stroeter_ks080_ma71_ad_02.sldprt | 393 KB |
| 683 | stroeter_ks080_ma71_ad_03.sldprt | 86 KB |
| 684 | stroeter_ks080_ma71_ad_04.sldprt | 111 KB |
| 685 | top ceiling window.sldprt | 121 KB |
| 686 | width positioning.sldprt | 62 KB |
| 687 | window 1.sldprt | 67 KB |
| 688 | window 1_MIR.sldprt | 67 KB |
| 689 | window 2.sldprt | 67 KB |
| 690 | window 2_MIR.sldprt | 67 KB |
| 691 | window frame 2.sldprt | 147 KB |
| 692 | window frame 2_MIR.sldprt | 148 KB |
| 693 | window frame.sldprt | 159 KB |
| 694 | window frame_MIR.sldprt | 159 KB |
| 695 | window lock on safety sensor.sldprt | 133 KB |
| 696 | xb4_bs8445.sldasm | 67.5 KB |
| 697 | xb4_bs8445_01.sldprt | 81.5 KB |
| 698 | xb4_bs8445_02.sldprt | 176 KB |
| 699 | xb4_bs8445_03.sldprt | 121 KB |
| 700 | xb4_bs8445_04.sldprt | 91.5 KB |
| 701 | xb4_bs8445_05.sldprt | 72 KB |
| 702 | xb4_bs8445_06.sldprt | 72 KB |
| 703 | xb4_bs8445_07.sldprt | 141 KB |
| 704 | xb4_bs8445_08.sldprt | 141 KB |
| 705 | xb4_bs8445_09.sldprt | 127 KB |
| 706 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 707 | 公众号免费下载.jpg | 79 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要45金币
图纸ID：554987
文件大小：74.05M
软件版本：SOLIDWORKS 2012,STEP
图纸格式：sldprt,sldasm
参数/编辑：可修改，包括参数
上传时间：2024-02-25
图纸介绍：
发布者
五月
作品: 87
粉丝: 5
提示
×
下载该图档需要消耗45金币！
确认下载
客服
签到
分享
