登录注册
微信扫码登录
Tesla特斯拉电动汽车电力驱动系统(含悬挂)（ID:556625）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | +必看说明+.txt | 2.22 KB |
| 2 | ANSI B18.2.3.4M - M12 x 1.75x45.CATPart | 85.1 KB |
| 3 | ANSI B18.2.4.2M - M5x0.8 - 8.CATPart | 83.1 KB |
| 4 | AS 1427 - M5 x 12(2).CATPart | 82.4 KB |
| 5 | AS 1427 - M6 x 8(6) I.CATPart | 161 KB |
| 6 | Coilover Nut.CATPart | 143 KB |
| 7 | Copy (1) of ABS sensor 3.CATPart | 3.21 MB |
| 8 | Copy (1) of ANSI B18.3.1M - M14x2 x 40(2).CATPart | 79.4 KB |
| 9 | Copy (1) of Armature Rotor.CATPart | 1.5 MB |
| 10 | Copy (1) of Ball Joint 2b.CATPart | 211 KB |
| 11 | Copy (1) of Ball Joint Lower 2.CATPart | 53.9 KB |
| 12 | Copy (1) of Ball Joint Steering Upper.CATPart | 246 KB |
| 13 | Copy (1) of Ball Joint Steering Upper_MIR.CATPart | 248 KB |
| 14 | Copy (1) of Ball Joint Steering.CATPart | 72.8 KB |
| 15 | Copy (1) of Ball Joint.CATPart | 60.6 KB |
| 16 | Copy (1) of Bearing Seal Housing.CATPart | 67.8 KB |
| 17 | Copy (1) of Bearing Seal Spindle Side.CATPart | 83.8 KB |
| 18 | Copy (1) of Bracket Lower control Arm.CATPart | 166 KB |
| 19 | Copy (1) of Bracket Upper Control Arm.CATPart | 145 KB |
| 20 | Copy (1) of Brake Caliper.CATPart | 4.98 MB |
| 21 | Copy (1) of Castle Nut.CATPart | 318 KB |
| 22 | Copy (1) of Coilover Bolt.CATPart | 324 KB |
| 23 | Copy (1) of Coilover Nut.CATPart | 144 KB |
| 24 | Copy (1) of Coilover.CATPart | 3.44 MB |
| 25 | Copy (1) of Control Arm Bolts.CATPart | 325 KB |
| 26 | Copy (1) of Control Arm Nuts.CATPart | 145 KB |
| 27 | Copy (1) of Cotter Pin 2.CATPart | 126 KB |
| 28 | Copy (1) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 29 | Copy (1) of Grease Nipple M5-Straight.CATPart | 109 KB |
| 30 | Copy (1) of Grease nipple.CATPart | 297 KB |
| 31 | Copy (1) of Knuckle.CATPart | 1.9 MB |
| 32 | Copy (1) of Lower Ball Joint 2a.CATPart | 165 KB |
| 33 | Copy (1) of Lower Ball Joint Nut.CATPart | 125 KB |
| 34 | Copy (1) of Revised Crossbeam.CATPart | 3.86 MB |
| 35 | Copy (1) of Stator dust cover.CATPart | 1.87 MB |
| 36 | Copy (1) of Steering Nut.CATPart | 125 KB |
| 37 | Copy (1) of Stud.CATPart | 411 KB |
| 38 | Copy (1) of Temp Sensor Screws.CATPart | 119 KB |
| 39 | Copy (1) of Tie Rod Nut.CATPart | 70.2 KB |
| 40 | Copy (1) of Tie Rod.CATPart | 48.6 KB |
| 41 | Copy (1) of Tie Rod_MIR.CATPart | 48.7 KB |
| 42 | Copy (1) of Upper Ball Joint Nut.CATPart | 125 KB |
| 43 | Copy (1) of Upper Control Arm Ball Joint Top Nuts.CATPart | 72.5 KB |
| 44 | Copy (1) of Upper Control Arm.CATPart | 665 KB |
| 45 | Copy (1) of Wire Spring.CATPart | 438 KB |
| 46 | Copy (1) of Wiring Cover 2.CATPart | 261 KB |
| 47 | Copy (1) of Wiring Cover Gasket.CATPart | 111 KB |
| 48 | Copy (1) of banjo bolt.CATPart | 111 KB |
| 49 | Copy (1) of battery to controller neg wire.CATPart | 285 KB |
| 50 | Copy (1) of brake caliper bolt.CATPart | 137 KB |
| 51 | Copy (1) of camero rim.CATPart | 4.79 MB |
| 52 | Copy (1) of carter pin.CATPart | 101 KB |
| 53 | Copy (1) of copy_ABS sensor 4.CATPart | 3.22 MB |
| 54 | Copy (1) of copy_Armature Rotor.CATPart | 1.51 MB |
| 55 | Copy (1) of copy_Ball Joint 2b.CATPart | 185 KB |
| 56 | Copy (1) of copy_Brake Caliper.CATPart | 5 MB |
| 57 | Copy (1) of copy_Coilover.CATPart | 3.44 MB |
| 58 | Copy (1) of copy_Knuckle.CATPart | 1.9 MB |
| 59 | Copy (1) of copy_Lower Ball Joint 2a.CATPart | 163 KB |
| 60 | Copy (1) of copy_Stator dust cover.CATPart | 1.85 MB |
| 61 | Copy (1) of copy_Upper Control Arm.CATPart | 664 KB |
| 62 | Copy (1) of copy_Wiring Cover 3.CATPart | 261 KB |
| 63 | Copy (1) of copy_camero rim.CATPart | 4.8 MB |
| 64 | Copy (1) of copy_disk brake 3.CATPart | 3.82 MB |
| 65 | Copy (1) of copy_spindle.CATPart | 631 KB |
| 66 | Copy (1) of copy_tire.CATPart | 50.1 MB |
| 67 | Copy (1) of copy_wires.CATPart | 435 KB |
| 68 | Copy (1) of disk brake 2.CATPart | 3.8 MB |
| 69 | Copy (1) of inflater nipple.CATPart | 155 KB |
| 70 | Copy (1) of lower control arm.CATPart | 1.46 MB |
| 71 | Copy (1) of lower control arm_MIR.CATPart | 1.48 MB |
| 72 | Copy (1) of lugnut.CATPart | 164 KB |
| 73 | Copy (1) of revised steering arm.CATPart | 85.9 KB |
| 74 | Copy (1) of rubber wire bushing.CATPart | 54.2 KB |
| 75 | Copy (1) of spindle.CATPart | 624 KB |
| 76 | Copy (1) of steering joint.CATPart | 180 KB |
| 77 | Copy (1) of steering joint_MIR.CATPart | 181 KB |
| 78 | Copy (1) of tire.CATPart | 50 MB |
| 79 | Copy (1) of wires.CATPart | 372 KB |
| 80 | Copy (10) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 81 | Copy (10) of Stud.CATPart | 411 KB |
| 82 | Copy (10) of lugnut.CATPart | 164 KB |
| 83 | Copy (11) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 84 | Copy (12) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 85 | Copy (13) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 86 | Copy (14) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 87 | Copy (15) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 88 | Copy (16) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 89 | Copy (17) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 90 | Copy (18) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 91 | Copy (19) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 92 | Copy (2) of ANSI B18.3.1M - M14x2 x 40(2).CATPart | 79.4 KB |
| 93 | Copy (2) of Ball Joint Lower 2.CATPart | 53.9 KB |
| 94 | Copy (2) of Ball Joint Steering Upper.CATPart | 252 KB |
| 95 | Copy (2) of Ball Joint Steering Upper_MIR.CATPart | 243 KB |
| 96 | Copy (2) of Ball Joint Steering.CATPart | 72.8 KB |
| 97 | Copy (2) of Ball Joint.CATPart | 60.6 KB |
| 98 | Copy (2) of Bearing Seal Housing.CATPart | 67.8 KB |
| 99 | Copy (2) of Bearing Seal Spindle Side.CATPart | 83.8 KB |
| 100 | Copy (2) of Bracket Lower control Arm.CATPart | 160 KB |
| 101 | Copy (2) of Bracket Upper Control Arm.CATPart | 145 KB |
| 102 | Copy (2) of Castle Nut.CATPart | 323 KB |
| 103 | Copy (2) of Coilover Bolt.CATPart | 324 KB |
| 104 | Copy (2) of Coilover Nut.CATPart | 144 KB |
| 105 | Copy (2) of Control Arm Bolts.CATPart | 325 KB |
| 106 | Copy (2) of Control Arm Nuts.CATPart | 145 KB |
| 107 | Copy (2) of Cotter Pin 2.CATPart | 126 KB |
| 108 | Copy (2) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 109 | Copy (2) of Grease Nipple M5-Straight.CATPart | 109 KB |
| 110 | Copy (2) of Grease nipple.CATPart | 297 KB |
| 111 | Copy (2) of Lower Ball Joint Nut.CATPart | 125 KB |
| 112 | Copy (2) of Steering Nut.CATPart | 125 KB |
| 113 | Copy (2) of Stud.CATPart | 411 KB |
| 114 | Copy (2) of Temp Sensor Screws.CATPart | 119 KB |
| 115 | Copy (2) of Tie Rod Nut.CATPart | 70.2 KB |
| 116 | Copy (2) of Upper Ball Joint Nut.CATPart | 125 KB |
| 117 | Copy (2) of Upper Control Arm Ball Joint Top Nuts.CATPart | 72.5 KB |
| 118 | Copy (2) of Wire Spring.CATPart | 438 KB |
| 119 | Copy (2) of Wiring Cover Gasket.CATPart | 111 KB |
| 120 | Copy (2) of banjo bolt.CATPart | 111 KB |
| 121 | Copy (2) of brake caliper bolt.CATPart | 137 KB |
| 122 | Copy (2) of carter pin.CATPart | 101 KB |
| 123 | Copy (2) of inflater nipple.CATPart | 155 KB |
| 124 | Copy (2) of lugnut.CATPart | 164 KB |
| 125 | Copy (2) of rubber wire bushing.CATPart | 54.2 KB |
| 126 | Copy (20) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 127 | Copy (3) of ANSI B18.3.1M - M14x2 x 40(2).CATPart | 79.4 KB |
| 128 | Copy (3) of Bracket Lower control Arm.CATPart | 166 KB |
| 129 | Copy (3) of Bracket Upper Control Arm.CATPart | 145 KB |
| 130 | Copy (3) of Coilover Bolt.CATPart | 324 KB |
| 131 | Copy (3) of Control Arm Bolts.CATPart | 325 KB |
| 132 | Copy (3) of Control Arm Nuts.CATPart | 145 KB |
| 133 | Copy (3) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 134 | Copy (3) of Grease Nipple M5-Straight.CATPart | 109 KB |
| 135 | Copy (3) of Stud.CATPart | 411 KB |
| 136 | Copy (3) of Temp Sensor Screws.CATPart | 119 KB |
| 137 | Copy (3) of Tie Rod Nut.CATPart | 70.2 KB |
| 138 | Copy (3) of Upper Control Arm Ball Joint Top Nuts.CATPart | 72.5 KB |
| 139 | Copy (3) of Wire Spring.CATPart | 438 KB |
| 140 | Copy (3) of brake caliper bolt.CATPart | 137 KB |
| 141 | Copy (3) of carter pin.CATPart | 101 KB |
| 142 | Copy (3) of lugnut.CATPart | 164 KB |
| 143 | Copy (3) of rubber wire bushing.CATPart | 54.2 KB |
| 144 | Copy (4) of ANSI B18.3.1M - M14x2 x 40(2).CATPart | 79.4 KB |
| 145 | Copy (4) of Bracket Lower control Arm.CATPart | 166 KB |
| 146 | Copy (4) of Bracket Upper Control Arm.CATPart | 145 KB |
| 147 | Copy (4) of Coilover Bolt.CATPart | 324 KB |
| 148 | Copy (4) of Control Arm Bolts.CATPart | 325 KB |
| 149 | Copy (4) of Control Arm Nuts.CATPart | 145 KB |
| 150 | Copy (4) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 151 | Copy (4) of Grease Nipple M5-Straight.CATPart | 109 KB |
| 152 | Copy (4) of Stud.CATPart | 411 KB |
| 153 | Copy (4) of Temp Sensor Screws.CATPart | 119 KB |
| 154 | Copy (4) of Tie Rod Nut.CATPart | 70.2 KB |
| 155 | Copy (4) of Upper Control Arm Ball Joint Top Nuts.CATPart | 72.5 KB |
| 156 | Copy (4) of Wire Spring.CATPart | 438 KB |
| 157 | Copy (4) of brake caliper bolt.CATPart | 137 KB |
| 158 | Copy (4) of carter pin.CATPart | 101 KB |
| 159 | Copy (4) of lugnut.CATPart | 164 KB |
| 160 | Copy (4) of rubber wire bushing.CATPart | 54.2 KB |
| 161 | Copy (5) of ANSI B18.3.1M - M14x2 x 40(2).CATPart | 79.4 KB |
| 162 | Copy (5) of Control Arm Bolts.CATPart | 325 KB |
| 163 | Copy (5) of Control Arm Nuts.CATPart | 145 KB |
| 164 | Copy (5) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 165 | Copy (5) of Stud.CATPart | 411 KB |
| 166 | Copy (5) of Upper Control Arm Ball Joint Top Nuts.CATPart | 72.5 KB |
| 167 | Copy (5) of carter pin.CATPart | 101 KB |
| 168 | Copy (5) of lugnut.CATPart | 164 KB |
| 169 | Copy (6) of ANSI B18.3.1M - M14x2 x 40(2).CATPart | 79.4 KB |
| 170 | Copy (6) of Control Arm Bolts.CATPart | 325 KB |
| 171 | Copy (6) of Control Arm Nuts.CATPart | 145 KB |
| 172 | Copy (6) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 173 | Copy (6) of Stud.CATPart | 411 KB |
| 174 | Copy (6) of Upper Control Arm Ball Joint Top Nuts.CATPart | 72.5 KB |
| 175 | Copy (6) of carter pin.CATPart | 101 KB |
| 176 | Copy (6) of lugnut.CATPart | 164 KB |
| 177 | Copy (7) of ANSI B18.3.1M - M14x2 x 40(2).CATPart | 79.4 KB |
| 178 | Copy (7) of Control Arm Bolts.CATPart | 325 KB |
| 179 | Copy (7) of Control Arm Nuts.CATPart | 145 KB |
| 180 | Copy (7) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 181 | Copy (7) of Stud.CATPart | 411 KB |
| 182 | Copy (7) of lugnut.CATPart | 164 KB |
| 183 | Copy (8) of ANSI B18.3.1M - M14x2 x 40(2).CATPart | 79.4 KB |
| 184 | Copy (8) of Control Arm Bolts.CATPart | 325 KB |
| 185 | Copy (8) of Control Arm Nuts.CATPart | 145 KB |
| 186 | Copy (8) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 187 | Copy (8) of Stud.CATPart | 411 KB |
| 188 | Copy (8) of lugnut.CATPart | 164 KB |
| 189 | Copy (9) of Dust Cover Socket cap screws.CATPart | 72.1 KB |
| 190 | Copy (9) of Stud.CATPart | 411 KB |
| 191 | Copy (9) of lugnut.CATPart | 164 KB |
| 192 | DIN 6923 - M12 x 1.75.CATPart | 90.6 KB |
| 193 | DIN 6923 - M8 x 1.25.CATPart | 89.3 KB |
| 194 | Nuda cooler LARGE.CATPart | 2.16 MB |
| 195 | Nuda900_Cooler_OEM.CATPart | 2.13 MB |
| 196 | Rear Heat-sink.CATPart | 540 KB |
| 197 | Tesla driving axle.CATProduct | 90.4 KB |
| 198 | ThunderSky - Winston Lithium Cell 40Ah.CATPart | 538 KB |
| 199 | ThunderSky - Winston Lithium Cell 40Ah_1.CATPart | 522 KB |
| 200 | ThunderSky - Winston Lithium Cell 40Ah_2.CATPart | 522 KB |
| 201 | ThunderSky - Winston Lithium Cell 40Ah_3.CATPart | 523 KB |
| 202 | ThunderSky - Winston Lithium Cell 40Ah_4.CATPart | 523 KB |
| 203 | batter to contoller wire pos.CATPart | 329 KB |
| 204 | battery cover.CATPart | 2.96 MB |
| 205 | battery spacer.CATPart | 639 KB |
| 206 | battery terminal wire connector revised.CATPart | 105 KB |
| 207 | battery terminal wires long.CATPart | 134 KB |
| 208 | battery wire covers back.CATPart | 117 KB |
| 209 | bridge terminal for batteries EXTRA LONG.CATPart | 76.9 KB |
| 210 | bridge terminal for batteries LONG.CATPart | 76.9 KB |
| 211 | bridge terminal for batteries.CATPart | 76.9 KB |
| 212 | bridge wire.CATPart | 437 KB |
| 213 | cross beam.CATPart | 178 KB |
| 214 | fan wireing large.CATPart | 302 KB |
| 215 | fan wiring.CATPart | 258 KB |
| 216 | motor Sensor and ABS wires.CATPart | 245 KB |
| 217 | motor checkpoint.CATProduct | 315 KB |
| 218 | motor checkpoint.stp | 281 MB |
| 219 | motor controller.CATPart | 2.26 MB |
| 220 | rear fan wires.CATPart | 262 KB |
| 221 | steering dampener.CATPart | 1.59 MB |
| 222 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 223 | 公众号免费下载.jpg | 79 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要40金币
图纸ID：556625
文件大小：140.49M
软件版本：STEP,CATIA
参数/编辑：可修改，包括参数
上传时间：2024-03-02
图纸介绍：
发布者
悠闲的浮生
作品: 9
粉丝: 0
提示
×
下载该图档需要消耗40金币！
确认下载
