微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
steve201麦克纳姆轮机器人车（ID:559405）
103
0
0
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | !nanotube!.0002.iam | 343 KB |
| 2 | !nanotube!.iam | 319 KB |
| 3 | #10-32 0.5 Inch Flat-head Socket Cap Screw.ipt | 98.5 KB |
| 4 | +必看说明+.txt | 2.22 KB |
| 5 | 017-retainer_ring.0001.ipt | 163 KB |
| 6 | 017-retainer_ring.ipt | 186 KB |
| 7 | 017SB-actuator_body.0001.ipt | 266 KB |
| 8 | 017SB-actuator_body.ipt | 293 KB |
| 9 | 096-DP.0005.iam | 239 KB |
| 10 | 096-DP.iam | 168 KB |
| 11 | 096-DPC0000000_0_dummy.0001.ipt | 67.5 KB |
| 12 | 096-DPC0000000_0_dummy.ipt | 79.5 KB |
| 13 | 09P0000_rear_head.0001.ipt | 272 KB |
| 14 | 09P0000_rear_head.ipt | 319 KB |
| 15 | 09R-7_31350C.0001.ipt | 121 KB |
| 16 | 09R-7_31350C.ipt | 140 KB |
| 17 | 09R000-0_rod_guide.0001.ipt | 242 KB |
| 18 | 09R000-0_rod_guide.ipt | 289 KB |
| 19 | 0_75-shaft.0001.ipt | 104 KB |
| 20 | 0_75-shaft.ipt | 121 KB |
| 21 | 10 Washer_Preferred Narrow FW 0.19.0001.ipt | 80.5 KB |
| 22 | 10 Washer_Preferred Narrow FW 0.19.ipt | 80.5 KB |
| 23 | 10 Washer_Preferred Narrow FW 0.19.ipt | 81.5 KB |
| 24 | 10-32 0.375 inch Long with Nut Assembly.0001.iam | 118 KB |
| 25 | 10-32 0.375 inch Long with Nut Assembly.iam | 119 KB |
| 26 | 10-32 0.375 inch Long.ipt | 116 KB |
| 27 | 10-32 0.5 inch Long countersunk flat head with Nut Assembly.0001.iam | 104 KB |
| 28 | 10-32 0.5 inch Long countersunk flat head with Nut Assembly.iam | 104 KB |
| 29 | 10-32 0.5 inch Long with Nut Assembly.0001.iam | 112 KB |
| 30 | 10-32 0.5 inch Long with Nut Assembly.iam | 112 KB |
| 31 | 10-32 0.5 inch Long.ipt | 109 KB |
| 32 | 10-32 1.5 inch Long.ipt | 93 KB |
| 33 | 10-32 Nylock Nut 1_90631A411.0001.ipt | 297 KB |
| 34 | 10-32 Nylock Nut 1_90631A411.ipt | 297 KB |
| 35 | 10-32 Nylock Nut 1_90631A411.ipt | 299 KB |
| 36 | 10-32 Slim Nylock Nut.ipt | 126 KB |
| 37 | 1010 X 48 (1).0002.ipt | 185 KB |
| 38 | 1010 X 48 (1).0003.ipt | 188 KB |
| 39 | 1010 X 48 (1).ipt | 251 KB |
| 40 | 1010 X 48 (1).ipt | 259 KB |
| 41 | 1010 X 48 (1)_MIR.ipt | 231 KB |
| 42 | 12 inch 80 20.ipt | 85 KB |
| 43 | 13 inch 80 20.ipt | 85 KB |
| 44 | 1st Stage Assembly.0002.iam | 186 KB |
| 45 | 1st Stage Assembly.0008.iam | 261 KB |
| 46 | 1st Stage Assembly.iam | 189 KB |
| 47 | 1st Stage Assembly.idw | 10.3 MB |
| 48 | 1st Stage Assembly.idw | 10.3 MB |
| 49 | 2011 compressor.ipt | 610 KB |
| 50 | 21 inch 80 20.ipt | 86 KB |
| 51 | 250 Washer.0001.ipt | 88.5 KB |
| 52 | 250 Washer.ipt | 88.5 KB |
| 53 | 250 Washer.ipt | 89 KB |
| 54 | 2in Wheel Intergrated 0375 HEX Hub-.ipt | 656 KB |
| 55 | 2nd Stage Assembly Claw.0001.iam | 279 KB |
| 56 | 2nd Stage Assembly Claw.iam | 926 KB |
| 57 | 2nd Stage Assembly.0001.idw | 10.4 MB |
| 58 | 2nd Stage Assembly.0002.iam | 182 KB |
| 59 | 2nd Stage Assembly.0002.idw | 10.4 MB |
| 60 | 2nd Stage Assembly.0013.iam | 260 KB |
| 61 | 2nd Stage Assembly.0014.iam | 1.11 MB |
| 62 | 2nd Stage Assembly.iam | 278 KB |
| 63 | 2nd Stage Assembly.idw | 10.4 MB |
| 64 | 2nd Stage Assembly.idw | 10.4 MB |
| 65 | 3076T350_TIE-DOWN RING.ipt | 155 KB |
| 66 | 3rd Stage Lift.0001.idw | 10.4 MB |
| 67 | 3rd Stage Lift.0005.iam | 217 KB |
| 68 | 3rd Stage Lift.iam | 764 KB |
| 69 | 3rd Stage Lift.idw | 10.4 MB |
| 70 | 4 iiinch 80 20.ipt | 81.5 KB |
| 71 | 4IN Compliant Wheel FINAL Overmold.ipt | 361 KB |
| 72 | 5 inch 80 20.ipt | 82.5 KB |
| 73 | 8 Mecanum Plate Left B.ipt | 398 KB |
| 74 | 8 Mecanum Plate right B.0001.ipt | 412 KB |
| 75 | 8 Mecanum Plate right B.ipt | 416 KB |
| 76 | 80-20 Corner.stp | 57.1 KB |
| 77 | 8020-45in.0001.ipt | 179 KB |
| 78 | 8020-45in.ipt | 122 KB |
| 79 | 93985A309_TYPE 416 SS TIGHT-TOLERANCE SHOULDER SCREW_93985A309.ipt | 324 KB |
| 80 | AM14U3+Long+REV1-1 【屿双网】.STEP | 28.3 MB |
| 81 | AST_Bearings_UCP201-8.ipt | 487 KB |
| 82 | AST_Bearings_UCP201-8.stp | 344 KB |
| 83 | Air compressor.ipt | 420 KB |
| 84 | Andymark Measurements.docx | 6.41 KB |
| 85 | Angle Bracket Modified.0001.ipt | 130 KB |
| 86 | Angle Bracket Modified.ipt | 132 KB |
| 87 | Angle Bracket.0001.ipt | 122 KB |
| 88 | Angle Bracket.ipt | 125 KB |
| 89 | Assembly of box manipulator if we are usig wheels.0001.iam | 226 KB |
| 90 | Assembly of box manipulator.0009.iam | 815 KB |
| 91 | Assembly of box manipulator.iam | 714 KB |
| 92 | Assembly1.0011.iam | 1.4 MB |
| 93 | Assembly1.iam | 1.45 MB |
| 94 | Assembly1.iam | 106 KB |
| 95 | Assembly1.iam | 136 KB |
| 96 | Axis of symetry for claw system.ipt | 83 KB |
| 97 | BAG_Motor_217-3351.ipt | 231 KB |
| 98 | Battery 【屿双网】.STEP | 242 KB |
| 99 | Battery.ipt | 172 KB |
| 100 | Bearing Delrin Spacer.ipt | 94.5 KB |
| 101 | Bearing block.0003.iam | 200 KB |
| 102 | Bearing block.iam | 202 KB |
| 103 | Bearing mounting assembly.SLDPRT.0002.iam | 162 KB |
| 104 | Bearing mounting assembly.SLDPRT.iam | 198 KB |
| 105 | Bottom cross support.ipt | 76.5 KB |
| 106 | Box Manipulator with lift.0027.iam | 396 KB |
| 107 | Box Manipulator with lift.iam | 365 KB |
| 108 | Box lift with third stage.0013.iam | 569 KB |
| 109 | Box lift with third stage.iam | 563 KB |
| 110 | Buddy lift bar.ipt | 216 KB |
| 111 | BuddyliftAll.0008.iam | 178 KB |
| 112 | BuddyliftAll.iam | 221 KB |
| 113 | C channel.0001.ipt | 334 KB |
| 114 | C channel.ipt | 338 KB |
| 115 | C-096-DP0000_rod.0001.ipt | 132 KB |
| 116 | C-096-DP0000_rod.ipt | 150 KB |
| 117 | CRQ2BS15-90.jpg | 9.61 KB |
| 118 | Cam for box lift winch.0001.ipt | 97.5 KB |
| 119 | Cam for box lift winch.ipt | 121 KB |
| 120 | Camera_Mount.0002.ipt | 182 KB |
| 121 | Camera_Mount.ipt | 192 KB |
| 122 | Camerabase.0003.ipt | 174 KB |
| 123 | Camerabase.ipt | 182 KB |
| 124 | Carriage Rollers.iam | 227 KB |
| 125 | Claw Assembly with Carriage.0004.iam | 281 KB |
| 126 | Claw Assembly with Carriage.iam | 281 KB |
| 127 | Claw Lift to axel connector.0001.iam | 367 KB |
| 128 | Claw Lift to axel connector.0004.iam | 380 KB |
| 129 | Claw Lift to axel connector.iam | 380 KB |
| 130 | Claw Pneumatic cylinder.0001.iam | 220 KB |
| 131 | Claw Pneumatic cylinder.iam | 179 KB |
| 132 | Claw to Axel.0002.iam | 92.5 KB |
| 133 | Claw to Axel.iam | 93 KB |
| 134 | Claw to axel connector.iam | 252 KB |
| 135 | Claw with attachments.0011.iam | 300 KB |
| 136 | Claw with attachments.iam | 275 KB |
| 137 | Command Console Redesign.ipt | 107 KB |
| 138 | CompressorBody.ipt | 250 KB |
| 139 | CompressorHead.ipt | 233 KB |
| 140 | CompressorPlate.ipt | 117 KB |
| 141 | CompressorValve.ipt | 118 KB |
| 142 | D-33057-1_6220.0001.ipt | 104 KB |
| 143 | D-33057-1_6220.ipt | 132 KB |
| 144 | D-4237S-PT-rear_head.0001.ipt | 200 KB |
| 145 | D-4237S-PT-rear_head.ipt | 230 KB |
| 146 | D-51.0001.ipt | 88 KB |
| 147 | D-51.ipt | 113 KB |
| 148 | Double Lift Plate.0002.ipt | 228 KB |
| 149 | Double Lift Plate.idw | 10.3 MB |
| 150 | Double Lift Plate.ipt | 259 KB |
| 151 | Drive Station.ipt | 154 KB |
| 152 | Drive Train Assembly.0005.iam | 1.34 MB |
| 153 | Drive Train.0024.iam | 1.22 MB |
| 154 | Drive Train.iam | 1.38 MB |
| 155 | END CAPS.ipt | 206 KB |
| 156 | ENDCAPGUIDE for box manipulation.0001.ipt | 240 KB |
| 157 | ENDCAPGUIDE for box manipulation.ipt | 220 KB |
| 158 | ENDCAPGUIDE.ipt | 241 KB |
| 159 | Electronics.0011.iam | 8.13 MB |
| 160 | Electronics.iam | 8.17 MB |
| 161 | ElectronicsPlate.0001.ipt | 533 KB |
| 162 | ElectronicsPlate.ipt | 541 KB |
| 163 | Empty WormBox.ipt | 4.62 MB |
| 164 | Empty wormgear housing.0006.ipt | 4.54 MB |
| 165 | Empty wormgear housing.ipt | 4.54 MB |
| 166 | End Axle II.0001.ipt | 96 KB |
| 167 | End Axle II.ipt | 95.5 KB |
| 168 | End Axle II.ipt | 97 KB |
| 169 | Extra nuts.0001.iam | 90 KB |
| 170 | Extra nuts.iam | 90 KB |
| 171 | FR6ZZ-L Bearing.ipt | 118 KB |
| 172 | FR8ZZ Hex Bearing.ipt | 131 KB |
| 173 | Full drivetrain.0014.iam | 1.43 MB |
| 174 | Full drivetrain.iam | 1.33 MB |
| 175 | Grippy Things.ipt | 94 KB |
| 176 | Gusset.0006.ipt | 118 KB |
| 177 | Gusset.ipt | 110 KB |
| 178 | Hub.ipt | 115 KB |
| 179 | Internal Support Beam1.0005.ipt | 175 KB |
| 180 | Internal Support Beam1.idw | 10.3 MB |
| 181 | Internal Support Beam1.ipt | 170 KB |
| 182 | JEG-250 Bearing Assly..SLDASM | 368 KB |
| 183 | Latch.dxf | 202 KB |
| 184 | LatchAssembly1.0005.iam | 157 KB |
| 185 | LatchAssembly1.0016.iam | 133 KB |
| 186 | LatchAssembly1.iam | 143 KB |
| 187 | LatchAssembly2.0020.iam | 183 KB |
| 188 | LatchAssembly2.0021.iam | 182 KB |
| 189 | LatchAssembly2.iam | 141 KB |
| 190 | Latchpart2.0013.ipt | 131 KB |
| 191 | Latchpart2.ipt | 131 KB |
| 192 | Latchpart2.stp | 34.2 KB |
| 193 | Left+Wheel 【屿双网】.STEP | 7.09 MB |
| 194 | Lift Winch.0006.iam | 289 KB |
| 195 | Lift Winch.iam | 313 KB |
| 196 | Lift full assembaly.0004.iam | 724 KB |
| 197 | Lift plus Claw.0010.iam | 875 KB |
| 198 | Lift plus Claw.iam | 870 KB |
| 199 | Lift verticals A.0006.iam | 150 KB |
| 200 | Lift verticals A.iam | 150 KB |
| 201 | Lift verticals B.0005.iam | 148 KB |
| 202 | Lift verticals B.iam | 150 KB |
| 203 | Lock Frame.dxf | 203 KB |
| 204 | Locking Ring.dxf | 204 KB |
| 205 | Lower 1st Stage Assembly_3rd Stage Mod.0001.idw | 10.3 MB |
| 206 | Lower 1st Stage Assembly_3rd Stage Mod.0008.iam | 185 KB |
| 207 | Lower 1st Stage Assembly_3rd Stage Mod.iam | 195 KB |
| 208 | Lower 1st Stage Assembly_3rd Stage Mod.idw | 10.3 MB |
| 209 | Lower 2nd Stage Assembly_3 Stage Lift modifications.0004.iam | 190 KB |
| 210 | Lower 2nd Stage Assembly_3 Stage Lift modifications.0007.iam | 183 KB |
| 211 | Lower 2nd Stage Assembly_3 Stage Lift modifications.iam | 138 KB |
| 212 | Lower cross support.0001.ipt | 177 KB |
| 213 | Lower cross support.0002.ipt | 218 KB |
| 214 | Lower cross support.ipt | 290 KB |
| 215 | MBC Bushing MU04TH04.0001.ipt | 120 KB |
| 216 | MBC Bushing MU04TH04.ipt | 120 KB |
| 217 | MBC Bushing MU04TH04.ipt | 120 KB |
| 218 | MBC Bushing MU04TH04.ipt | 120 KB |
| 219 | Middle Axle II.0001.ipt | 78.5 KB |
| 220 | Middle Axle II.ipt | 78.5 KB |
| 221 | Middle Axle II.ipt | 79.5 KB |
| 222 | Middle Axle II.ipt | 79.5 KB |
| 223 | Mobile Half of Claw.0001.ipt | 292 KB |
| 224 | Mobile Half of Claw.ipt | 293 KB |
| 225 | NI roboRIO.0001.ipt | 35.7 MB |
| 226 | NI roboRIO.ipt | 39.4 MB |
| 227 | NanoTube20 3-outputV3.ipt | 313 KB |
| 228 | Nanodrive encoder.ipt | 150 KB |
| 229 | Nanodrive encoder.stl | 41.1 KB |
| 230 | PT-017090-M.0001.iam | 93.5 KB |
| 231 | PT-017090-M.iam | 189 KB |
| 232 | Part2.ipt | 207 KB |
| 233 | Part4.0001.ipt | 196 KB |
| 234 | Part4.idw | 10.3 MB |
| 235 | Part4.ipt | 242 KB |
| 236 | Pillow Block 1.JPG | 159 KB |
| 237 | Pillow Block Bearing 【屿双网】.IGS | 2.12 MB |
| 238 | Pillow Block Bearing 【屿双网】.STEP | 1.04 MB |
| 239 | Pillow Block Bearing 【屿双网】.STEP | 1.04 MB |
| 240 | Pillow Block Bearing.0003.iam | 299 KB |
| 241 | Pillow Block Bearing.JPG | 158 KB |
| 242 | Pillow Block Bearing.SLDASM | 465 KB |
| 243 | Pillow Block Bearing.iam | 315 KB |
| 244 | Pillow Block Bearing.ipt | 899 KB |
| 245 | Pillow Block Bearing_1.jpg | 51.5 KB |
| 246 | Pillow Block.ipt | 157 KB |
| 247 | Pivot Bar.0003.ipt | 97.5 KB |
| 248 | Pivot Bar.ipt | 97.5 KB |
| 249 | Pixel Picker Carriage.ipt | 179 KB |
| 250 | Pixel Picker Claw Assembly.0001.iam | 151 KB |
| 251 | Pixel Picker Claw Assembly.iam | 151 KB |
| 252 | Pixel Picker Claw.0004.ipt | 480 KB |
| 253 | Pixel Picker Claw.ipt | 479 KB |
| 254 | Plate for pneumatic actuator.ipt | 149 KB |
| 255 | Platform.0001.ipt | 86 KB |
| 256 | Pneumatic Actuator Assembly with Hub.iam | 199 KB |
| 257 | Pneumatic attacher thing.ipt | 146 KB |
| 258 | Pneumatic_Control_Module_217-4243 【屿双网】.STEP | 25.3 MB |
| 259 | Pneumatic_Control_Module_217-4243.ipt | 8.75 MB |
| 260 | Power Cube.ipt | 80.5 KB |
| 261 | Power_Distribution_Panel_217-4244 【屿双网】.STEP | 51 MB |
| 262 | Power_Distribution_Panel_217-4244.ipt | 13 MB |
| 263 | Quarter Inch Washer.ipt | 96 KB |
| 264 | R6ZZ Bearing.ipt | 101 KB |
| 265 | REV-21-1000 Cross member.ipt | 214 KB |
| 266 | REV-21-1000.0007.ipt | 277 KB |
| 267 | REV-21-1000.ipt | 277 KB |
| 268 | REV-21-1002 Preloaded Assembly.0001.iam | 107 KB |
| 269 | REV-21-1002 Preloaded Assembly.iam | 107 KB |
| 270 | REV-21-1002.ipt | 88 KB |
| 271 | REV-21-1029 【屿双网】.STEP | 31.6 KB |
| 272 | REV-21-1029.0002.ipt | 105 KB |
| 273 | REV-21-1029.ipt | 105 KB |
| 274 | REV-21-1029.ipt | 92.5 KB |
| 275 | REV-21-1029_MIR.ipt | 112 KB |
| 276 | REV-21-1029_MIR1.ipt | 112 KB |
| 277 | REV-21-1030 【屿双网】.STEP | 31.5 KB |
| 278 | REV-21-1030.0002.ipt | 105 KB |
| 279 | REV-21-1030.ipt | 105 KB |
| 280 | REV-21-1030.ipt | 92 KB |
| 281 | REV-21-1030_MIR.ipt | 111 KB |
| 282 | REV-21-1030_MIR1.ipt | 111 KB |
| 283 | REV-21-1031 Preloaded Assembly.0002.iam | 259 KB |
| 284 | REV-21-1031 Preloaded Assembly.iam | 277 KB |
| 285 | REV-21-1031.ipt | 111 KB |
| 286 | REV-21-1032.0002.ipt | 135 KB |
| 287 | REV-21-1032.ipt | 143 KB |
| 288 | REV-21-1202 【屿双网】.dwg | 334 KB |
| 289 | REV-21-1202-2.ipt | 387 KB |
| 290 | REV-21-1203 Preload 2 Screws Assembly.0002.iam | 119 KB |
| 291 | REV-21-1203 Preload 2 Screws Assembly.0003.iam | 154 KB |
| 292 | REV-21-1203 Preload 2 Screws Assembly.iam | 136 KB |
| 293 | REV-21-1203 Preload Assembly.0002.iam | 125 KB |
| 294 | REV-21-1203 Preload Assembly.iam | 140 KB |
| 295 | REV-21-1203.0001.ipt | 179 KB |
| 296 | REV-21-1203.ipt | 247 KB |
| 297 | REV-21-1203.stp | 57.1 KB |
| 298 | REV-25-1238-1239 【屿双网】.STEP | 3.1 MB |
| 299 | REV-25-1238-1239.0014.iam | 411 KB |
| 300 | REV-25-1238-1239.iam | 410 KB |
| 301 | REV-25-1238-1239.iam | 416 KB |
| 302 | REV-29-1014 【屿双网】.STEP | 50.5 KB |
| 303 | REV-29-1014.0001.ipt | 133 KB |
| 304 | REV-29-1014.0002.ipt | 154 KB |
| 305 | REV-29-1014.ipt | 133 KB |
| 306 | REV-29-1014.ipt | 154 KB |
| 307 | REV-29-1014_MIR.ipt | 163 KB |
| 308 | REV-29-1014_MIR1.ipt | 163 KB |
| 309 | REV-41-1095.ipt | 238 KB |
| 310 | Rear Plate - Copy.ipt | 566 KB |
| 311 | Rear Plate.0022.ipt | 566 KB |
| 312 | Rear Plate.ipt | 331 KB |
| 313 | Rear Plate.stp | 194 KB |
| 314 | Right+Wheel 【屿双网】.STEP | 7.12 MB |
| 315 | Right+Wheel.0003.iam | 762 KB |
| 316 | Right+Wheel.iam | 758 KB |
| 317 | Robot Lift Assembly.0002.iam | 709 KB |
| 318 | Robot Lift Assembly.0009.iam | 537 KB |
| 319 | Robot Lift Assembly.0014.iam | 525 KB |
| 320 | Robot Lift Assembly.iam | 829 KB |
| 321 | Robot Lift Assembly.idw | 10.9 MB |
| 322 | Robot lift full assembly.iam | 327 KB |
| 323 | Roller E Core Optimized.0001.ipt | 82 KB |
| 324 | Roller E Core Optimized.ipt | 82.5 KB |
| 325 | Roller E Core Optimized.ipt | 83 KB |
| 326 | Roller E Optimized.0001.iam | 102 KB |
| 327 | Roller E Optimized.0002.iam | 108 KB |
| 328 | Roller E Optimized.iam | 103 KB |
| 329 | Roller E Optimized.iam | 107 KB |
| 330 | Roller E Skin Optimized.0001.ipt | 107 KB |
| 331 | Roller E Skin Optimized.ipt | 107 KB |
| 332 | Roller E Skin Optimized.ipt | 108 KB |
| 333 | Roller M core Optimized.0001.ipt | 117 KB |
| 334 | Roller M core Optimized.ipt | 117 KB |
| 335 | Roller M core Optimized.ipt | 118 KB |
| 336 | Roller M core Optimized.ipt | 118 KB |
| 337 | Roller M optimized.0001.iam | 135 KB |
| 338 | Roller M optimized.0002.iam | 138 KB |
| 339 | Roller M optimized.iam | 135 KB |
| 340 | Roller M optimized.iam | 138 KB |
| 341 | Roller M skin Optimized.0001.ipt | 220 KB |
| 342 | Roller M skin Optimized.ipt | 220 KB |
| 343 | Roller M skin Optimized.ipt | 221 KB |
| 344 | Roller M skin Optimized.ipt | 221 KB |
| 345 | Roller+M+optimized 【屿双网】.STEP | 488 KB |
| 346 | Roller+M+optimized.iam | 152 KB |
| 347 | SHCS 10-32 x 2.25.0001.ipt | 86 KB |
| 348 | SHCS 10-32 x 2.25.ipt | 86 KB |
| 349 | SHCS 10-32 x 2.25.ipt | 87 KB |
| 350 | SHCS 10-32 x 3.25_HX-SHCS 0.19-32x3.25x0.875-C.0001.ipt | 90 KB |
| 351 | SHCS 10-32 x 3.25_HX-SHCS 0.19-32x3.25x0.875-C.ipt | 90 KB |
| 352 | SHCS 10-32 x 3.25_HX-SHCS 0.19-32x3.25x0.875-C.ipt | 92 KB |
| 353 | Sideplate.0021.ipt | 573 KB |
| 354 | Sideplate.ipt | 514 KB |
| 355 | Sideplate.stp | 345 KB |
| 356 | Steel Split Lock Washer 0.375 inch Size.ipt | 78.5 KB |
| 357 | Support Spacer Half.0001.ipt | 2.9 MB |
| 358 | Support Spacer Half.ipt | 2.9 MB |
| 359 | Support Spacer Half.ipt | 2.92 MB |
| 360 | Talon_SRX_217-8080_No_Wires 【屿双网】.STEP | 9.04 MB |
| 361 | Talon_SRX_217-8080_No_Wires.ipt | 3.74 MB |
| 362 | Thumbs.db | 7.5 KB |
| 363 | Tie Down Ring.0001.iam | 138 KB |
| 364 | Tie Down Ring.iam | 138 KB |
| 365 | Toughbox Nano d04 am-0506.ipt | 111 KB |
| 366 | Upper 2nd Stage Assembly_3rd stage modification.0006.iam | 148 KB |
| 367 | Upper 2nd Stage Assembly_3rd stage modification.iam | 155 KB |
| 368 | Upper and Lower 3rd Stage Assembly.0002.iam | 156 KB |
| 369 | Upper and Lower 3rd Stage Assembly.iam | 169 KB |
| 370 | Voltage_Regulator_Module_217-4245 【屿双网】.STEP | 15.3 MB |
| 371 | Voltage_Regulator_Module_217-4245.ipt | 4.41 MB |
| 372 | WKE_16_60_15_01_609_6_1.stp | 2.68 MB |
| 373 | Wallbar.ipt | 121 KB |
| 374 | Winch Drum.0011.ipt | 285 KB |
| 375 | Winch Drum.ipt | 304 KB |
| 376 | Winch Drum.stp | 117 KB |
| 377 | Winch basic.0002.iam | 592 KB |
| 378 | Winch basic.iam | 589 KB |
| 379 | actuator to pivot bar.ipt | 101 KB |
| 380 | am-0030_0.5_Flanged_Shielded_Bearing.0001.ipt | 163 KB |
| 381 | am-0030_0.5_Flanged_Shielded_Bearing.ipt | 166 KB |
| 382 | am-0077a-500 Key Hub r2 【屿双网】.STEP | 97.2 KB |
| 383 | am-0077a-500 Key Hub r2 【屿双网】.STEP | 97.2 KB |
| 384 | am-0077a-500 Key Hub r2.ipt | 166 KB |
| 385 | am-0255+2.5inch+CIM+Motor 【屿双网】.STEP | 153 KB |
| 386 | am-0255+2.5inch+CIM+Motor 【屿双网】.STEP | 153 KB |
| 387 | am-0255+2.5inch+CIM+Motor.ipt | 170 KB |
| 388 | am-0255+2.5inch+CIM+Motor.ipt | 175 KB |
| 389 | am-0809 two 500 key shafts - 2 motor inputs 【屿双网】.STEP | 2.83 MB |
| 390 | am-0809 two 500 key shafts - 2 motor inputs (8) 【屿双网】.STEP | 2.83 MB |
| 391 | am-0917+WormBox 【屿双网】.STEP | 18.3 MB |
| 392 | am-0917+WormBox.0001.ipt | 1.33 MB |
| 393 | am-0917+WormBox.ipt | 1.19 MB |
| 394 | am-2877+Banebots+P60+64-1 【屿双网】.STEP | 294 KB |
| 395 | am-2877+Banebots+P60+64-1.ipt | 280 KB |
| 396 | am-3052_72in_C_Channel 【屿双网】.STEP | 1.2 MB |
| 397 | am-3052_72in_C_Channel 【屿双网】.STEP | 1.2 MB |
| 398 | am-3562+4IN+375Hex+Bore+Compliant+Wheel.iam | 239 KB |
| 399 | am-3666+-+375+Churro+Lite.ipt | 109 KB |
| 400 | am-churro_500_churro_tube 【屿双网】.STEP | 59.2 KB |
| 401 | am-churro_500_churro_tube.ipt | 152 KB |
| 402 | axel to life mech.0002.iam | 222 KB |
| 403 | axel to life mech.iam | 181 KB |
| 404 | batteryplate.0002.ipt | 243 KB |
| 405 | batteryplate.0007.ipt | 315 KB |
| 406 | batteryplate.ipt | 317 KB |
| 407 | box drum.0001.ipt | 95.5 KB |
| 408 | box drum.ipt | 95.5 KB |
| 409 | buddy extention rail.0007.iam | 173 KB |
| 410 | buddy extention rail.iam | 223 KB |
| 411 | buddy extention rail_MIR.iam | 159 KB |
| 412 | buddy extention rail_MIR1.0006.iam | 173 KB |
| 413 | buddy extention rail_MIR1.iam | 180 KB |
| 414 | buddy plate.0012.ipt | 119 KB |
| 415 | buddy plate.ipt | 133 KB |
| 416 | buddy plate_MIR.ipt | 111 KB |
| 417 | buddy plate_MIR1.0001.ipt | 110 KB |
| 418 | buddy plate_MIR1.0002.ipt | 112 KB |
| 419 | buddy plate_MIR1.0003.ipt | 136 KB |
| 420 | buddy plate_MIR1.ipt | 223 KB |
| 421 | buddyliftsliderail.0004.ipt | 211 KB |
| 422 | buddyliftsliderail.ipt | 245 KB |
| 423 | buddyliftsliderail_MIR.0001.ipt | 251 KB |
| 424 | buddyliftsliderail_MIR.ipt | 315 KB |
| 425 | buddyliftsliderail_MIR1.0001.ipt | 249 KB |
| 426 | buddyliftsliderail_MIR1.ipt | 252 KB |
| 427 | bvewa.JPG | 52.9 KB |
| 428 | camera assembly.0001.iam | 106 KB |
| 429 | camera assembly.iam | 107 KB |
| 430 | cameramount.0001.ipt | 162 KB |
| 431 | cameramount.ipt | 174 KB |
| 432 | cameramount.stl | 22 KB |
| 433 | circlebeam.0002.ipt | 128 KB |
| 434 | claw assembly with actuator.0002.iam | 278 KB |
| 435 | claw assembly with actuator.iam | 289 KB |
| 436 | claw assembly with actuator.idw | 10.4 MB |
| 437 | claw assembly.0006.iam | 230 KB |
| 438 | claw assembly.iam | 225 KB |
| 439 | compressor.iam | 71 KB |
| 440 | compressor.iam | 71 KB |
| 441 | compressormotorbody.ipt | 180 KB |
| 442 | compressormotorcap.ipt | 262 KB |
| 443 | crq2 【屿双网】.dwg | 756 KB |
| 444 | drivetrain cross churro.0004.ipt | 238 KB |
| 445 | drivetrain cross churro.ipt | 240 KB |
| 446 | final 【屿双网】.STEP | 957 KB |
| 447 | final.SLDPRT | 480 KB |
| 448 | final.ipt | 791 KB |
| 449 | fr6.ipt | 126 KB |
| 450 | front - Copy.ipt | 532 KB |
| 451 | front.0022.ipt | 532 KB |
| 452 | front.ipt | 332 KB |
| 453 | front.stp | 194 KB |
| 454 | fullRobot.0027.iam | 9.83 MB |
| 455 | fullRobot.iam | 9.38 MB |
| 456 | gryroplate.0002.ipt | 150 KB |
| 457 | gryroplate.ipt | 150 KB |
| 458 | gryroplate.stl | 24.7 KB |
| 459 | gyroplate.dxf | 202 KB |
| 460 | gyroplate2.dxf | 202 KB |
| 461 | hook part 1.0003.ipt | 162 KB |
| 462 | hopefully woking claw thing.0003.iam | 234 KB |
| 463 | hopefully woking claw thing.iam | 176 KB |
| 464 | hub.ipt | 167 KB |
| 465 | latch pt. 3 【屿双网】.dwg | 73.4 KB |
| 466 | latch pt. 3.0007.ipt | 128 KB |
| 467 | latch pt. 3.ipt | 126 KB |
| 468 | latch pt. 3.stp | 17.4 KB |
| 469 | latch pt. 4.0002.ipt | 127 KB |
| 470 | latch pt. 4.ipt | 123 KB |
| 471 | latch pt. 4.stp | 17.4 KB |
| 472 | latchpart1.0031.ipt | 397 KB |
| 473 | latchpart1.0032.ipt | 376 KB |
| 474 | latchpart1.ipt | 452 KB |
| 475 | latchpart1.stp | 136 KB |
| 476 | left 8in mecanum.0004.iam | 810 KB |
| 477 | left 8in mecanum.iam | 809 KB |
| 478 | lockfile.lck | 16 KB |
| 479 | lockfile.lck | 16 KB |
| 480 | lockfile.lck | 16 KB |
| 481 | lockfile.lck | 16 KB |
| 482 | lockfile.lck | 16 KB |
| 483 | lockfile.lck | 16 KB |
| 484 | lockfile.lck | 16 KB |
| 485 | lockfile.lck | 16 KB |
| 486 | lockfile.lck | 16 KB |
| 487 | lockfile.lck | 16 KB |
| 488 | lockfile.lck | 16 KB |
| 489 | lockfile.lck | 16 KB |
| 490 | lockfile.lck | 16 KB |
| 491 | magnet 【屿双网】.STEP | 19.2 KB |
| 492 | magnet.SLDPRT | 70.9 KB |
| 493 | nanotube adapters.0001.idw | 10.3 MB |
| 494 | nanotube adapters.0001.ipt | 206 KB |
| 495 | nanotube adapters.0004.ipt | 218 KB |
| 496 | nanotube adapters.0005.ipt | 236 KB |
| 497 | nanotube adapters.idw | 10.3 MB |
| 498 | nanotube adapters.ipt | 214 KB |
| 499 | nanotube adapters.ipt | 214 KB |
| 500 | new lift arm things.0001.iam | 417 KB |
| 501 | part1.0001.ipt | 473 KB |
| 502 | part1.ipt | 597 KB |
| 503 | part2_206.0001.ipt | 465 KB |
| 504 | part2_206.ipt | 542 KB |
| 505 | pillow_block.JPG | 66.3 KB |
| 506 | pneumatic attacher thing right.ipt | 122 KB |
| 507 | right 8in mecanum.iam | 803 KB |
| 508 | socket button head cap screw_ai_SBHCSCREW 0.25-20x1.125-HX-N.ipt | 110 KB |
| 509 | solid hub.0001.ipt | 168 KB |
| 510 | solid hub.ipt | 181 KB |
| 511 | tank.ipt | 171 KB |
| 512 | triangleplatform.0003.ipt | 252 KB |
| 513 | uncorrupt claw file.0002.iam | 904 KB |
| 514 | uncorrupt claw file.iam | 893 KB |
| 515 | untitled.559.jpg | 269 KB |
| 516 | upper cross beams.0002.ipt | 96 KB |
| 517 | upper cross beams.ipt | 96 KB |
| 518 | 【 屿双网 www.ysh3d.com 】 更多【资料】【图档】.url | 177 B |
| 519 | 公众号免费下载.jpg | 79 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要60金币
图纸ID：559405
文件大小：288.57M
软件版本：INVENTOR,STEP,AUTOCAD,IGES,SOLIDWORKS,STL
图纸格式：ipt,step,sldasm,stl,igs,dwg,sldprt
参数/编辑：可修改，包括参数
上传时间：2024-03-08
图纸介绍：
发布者
@qq
作品: 25
粉丝: 0
提示
×
下载该图档需要消耗60金币！
确认下载
客服
签到
分享
