微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
钢平台20（ID:582124）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 15MST1424-SIDES.SLDPRT | 28.1 KB |
| 2 | 15MST1424-SIDES.sldprt | 86 KB |
| 3 | 15MST1424.SLDASM | 40.4 KB |
| 4 | 15MST1424.sldasm | 48.5 KB |
| 5 | 24 W x 4 D TREAD.SLDPRT | 36.1 KB |
| 6 | 24 W x 4 D TREAD.sldprt | 64.5 KB |
| 7 | 24 WIDE.SLDPRT | 55.3 KB |
| 8 | 24 WIDE.sldprt | 112 KB |
| 9 | 96 WIDE-TREAD.SLDPRT | 58.3 KB |
| 10 | 96 WIDE-TREAD.sldprt | 123 KB |
| 11 | 96 WIDE-TREAD_2.SLDPRT | 61.9 KB |
| 12 | 96 WIDE-TREAD_3.SLDPRT | 61.5 KB |
| 13 | 96 WIDE-TREAD_4.SLDPRT | 59.1 KB |
| 14 | 96 WIDE-TREAD_5.SLDPRT | 55.2 KB |
| 15 | 96 WIDE-TREAD_6.SLDPRT | 31 KB |
| 16 | 96 WIDE-TREAD_DATAKIT_10.sldprt | 112 KB |
| 17 | 96 WIDE-TREAD_DATAKIT_112.sldprt | 123 KB |
| 18 | 96 WIDE-TREAD_DATAKIT_117.sldprt | 59 KB |
| 19 | 96 WIDE-TREAD_DATAKIT_120.sldprt | 116 KB |
| 20 | 96 WIDE-TREAD_DATAKIT_156.sldprt | 136 KB |
| 21 | 99795A131_Heavy Duty Screws for Concrete and Block (1)_99795A131.SLDPRT | 150 KB |
| 22 | 99795A131_Heavy Duty Screws for Concrete and Block (1)_99795A131.sldprt | 245 KB |
| 23 | ANGLE, 1.5 X 1.5 X .25.SLDPRT | 20.9 KB |
| 24 | ANGLE, 1.5 X 1.5 X .25.sldprt | 34.5 KB |
| 25 | ANGLE, 4 X 1 X 5 LG.SLDPRT | 21.3 KB |
| 26 | ANGLE, 4 X 1 X 5 LG.sldprt | 36.5 KB |
| 27 | BASE PLATE.SLDPRT | 20.2 KB |
| 28 | BASE PLATE.sldprt | 29.5 KB |
| 29 | FLAT HEAD SCREW, .5 X 5_92620A754.SLDPRT | 303 KB |
| 30 | FLAT HEAD SCREW, .5 X 5_92620A754.sldprt | 542 KB |
| 31 | FLATBAR, 5 X .25.SLDPRT | 19.8 KB |
| 32 | FLATBAR, 5 X .25.sldprt | 29.5 KB |
| 33 | GASSTRUT MOUNT_Default_As Machined_.SLDASM | 35.2 KB |
| 34 | GASSTRUT MOUNT_Default_As Machined_.SLDPRT | 21.7 KB |
| 35 | GASSTRUT MOUNT_Default_As Machined_.sldprt | 57 KB |
| 36 | GASSTRUT MOUNT_Default_As Machined__2.SLDPRT | 21.6 KB |
| 37 | GASSTRUT MOUNT_Default_As Machined__3.SLDPRT | 21.6 KB |
| 38 | GUSSET PLATE.SLDPRT | 20 KB |
| 39 | GUSSET PLATE.sldprt | 28 KB |
| 40 | HANDRAIL-1_Default_As Machined_.SLDASM | 36 KB |
| 41 | HANDRAIL-1_Default_As Machined_.SLDPRT | 24.5 KB |
| 42 | HANDRAIL-1_Default_As Machined_.sldprt | 136 KB |
| 43 | HANDRAIL-1_Default_As Machined__2.SLDPRT | 24.7 KB |
| 44 | HANDRAIL-1_Default_As Machined__3.SLDPRT | 22.5 KB |
| 45 | HANDRAIL-1_Default_As Machined__4.SLDPRT | 25.1 KB |
| 46 | HANDRAIL-1_Default_As Machined__5.SLDPRT | 22.1 KB |
| 47 | HANDRAIL-1_Default_As Machined__6.SLDPRT | 25.2 KB |
| 48 | HANDRAIL-2_Default_As Machined_.SLDASM | 35.8 KB |
| 49 | HANDRAIL-2_Default_As Machined_.SLDPRT | 22.1 KB |
| 50 | HANDRAIL-2_Default_As Machined_.sldprt | 136 KB |
| 51 | HANDRAIL-2_Default_As Machined__2.SLDPRT | 21.3 KB |
| 52 | HANDRAIL-2_Default_As Machined__3.SLDPRT | 25.2 KB |
| 53 | HANDRAIL-2_Default_As Machined__4.SLDPRT | 24.9 KB |
| 54 | HANDRAIL-2_Default_As Machined__5.SLDPRT | 25 KB |
| 55 | HANDRAIL-2_Default_As Machined__6.SLDPRT | 25.7 KB |
| 56 | HANDRAIL-3_Default_As Machined_.SLDASM | 35.3 KB |
| 57 | HANDRAIL-3_Default_As Machined_.SLDPRT | 24.3 KB |
| 58 | HANDRAIL-3_Default_As Machined_.sldprt | 105 KB |
| 59 | HANDRAIL-3_Default_As Machined__2.SLDPRT | 25.4 KB |
| 60 | HANDRAIL-3_Default_As Machined__3.SLDPRT | 25.4 KB |
| 61 | HANDRAIL-3_Default_As Machined__4.SLDPRT | 21.9 KB |
| 62 | HANDRAIL-5FT_Default_As Machined_.SLDASM | 35.3 KB |
| 63 | HANDRAIL-5FT_Default_As Machined_.SLDPRT | 25 KB |
| 64 | HANDRAIL-5FT_Default_As Machined_.sldprt | 116 KB |
| 65 | HANDRAIL-5FT_Default_As Machined__2.SLDPRT | 24.8 KB |
| 66 | HANDRAIL-5FT_Default_As Machined__3.SLDPRT | 22.2 KB |
| 67 | HANDRAIL-5FT_Default_As Machined__4.SLDPRT | 21.5 KB |
| 68 | HANDRAIL-5FT_Default_As Machined__5.SLDPRT | 25 KB |
| 69 | HANDRAIL-LH_Default_As Machined_.SLDASM | 36.2 KB |
| 70 | HANDRAIL-LH_Default_As Machined_.SLDPRT | 24.5 KB |
| 71 | HANDRAIL-LH_Default_As Machined_.sldprt | 177 KB |
| 72 | HANDRAIL-LH_Default_As Machined__2.SLDPRT | 22.1 KB |
| 73 | HANDRAIL-LH_Default_As Machined__3.SLDPRT | 33.2 KB |
| 74 | HANDRAIL-LH_Default_As Machined__4.SLDPRT | 21.4 KB |
| 75 | HANDRAIL-LH_Default_As Machined__5.SLDPRT | 26.4 KB |
| 76 | HANDRAIL-LH_Default_As Machined__6.SLDPRT | 25.2 KB |
| 77 | HANDRAIL-LH_Default_As Machined__7.SLDPRT | 21.7 KB |
| 78 | HANDRAIL-LH_Default_As Machined__8.SLDPRT | 25.2 KB |
| 79 | HANDRAIL-RH_Default_As Machined_.SLDASM | 35.8 KB |
| 80 | HANDRAIL-RH_Default_As Machined_.SLDPRT | 25.3 KB |
| 81 | HANDRAIL-RH_Default_As Machined_.sldprt | 177 KB |
| 82 | HANDRAIL-RH_Default_As Machined__2.SLDPRT | 33.5 KB |
| 83 | HANDRAIL-RH_Default_As Machined__3.SLDPRT | 24.4 KB |
| 84 | HANDRAIL-RH_Default_As Machined__4.SLDPRT | 25.7 KB |
| 85 | HANDRAIL-RH_Default_As Machined__5.SLDPRT | 24.6 KB |
| 86 | HANDRAIL-RH_Default_As Machined__6.SLDPRT | 22.2 KB |
| 87 | HANDRAIL-RH_Default_As Machined__7.SLDPRT | 21.3 KB |
| 88 | HANDRAIL-RH_Default_As Machined__8.SLDPRT | 21.5 KB |
| 89 | HANDRAIL_Default_As Machined_.SLDASM | 35.4 KB |
| 90 | HANDRAIL_Default_As Machined_.SLDPRT | 25 KB |
| 91 | HANDRAIL_Default_As Machined_.sldprt | 105 KB |
| 92 | HANDRAIL_Default_As Machined__2.SLDPRT | 24.9 KB |
| 93 | HANDRAIL_Default_As Machined__3.SLDPRT | 21.9 KB |
| 94 | HANDRAIL_Default_As Machined__4.SLDPRT | 24.8 KB |
| 95 | HINGED STAIR-PLATFORM.SLDASM | 43 KB |
| 96 | HINGED STAIR-PLATFORM.sldasm | 46 KB |
| 97 | LARGE PLATFORM.SLDASM | 3.22 MB |
| 98 | LARGE PLATFORM.STEP | 9.91 MB |
| 99 | LARGE PLATFORM.sldasm | 126 KB |
| 100 | LEG JOINER_Default_As Machined_.SLDPRT | 23.4 KB |
| 101 | LEG JOINER_Default_As Machined_.sldprt | 42.5 KB |
| 102 | MirrorLEG JOINER_Default_As Machined_.SLDPRT | 22.5 KB |
| 103 | MirrorLEG JOINER_Default_As Machined_.sldprt | 43 KB |
| 104 | MirrorMirrorLEG JOINER_Default_As Machined_.SLDPRT | 23.2 KB |
| 105 | MirrorMirrorLEG JOINER_Default_As Machined_.sldprt | 43 KB |
| 106 | MirrorMirrorSUPPORT LEG ASSEMBLY.SLDASM | 36 KB |
| 107 | MirrorMirrorSUPPORT LEG ASSEMBLY.sldasm | 27.5 KB |
| 108 | MirrorMirrorSUPPORT LEG-LOWER_Default_As Machined_.SLDPRT | 26.4 KB |
| 109 | MirrorMirrorSUPPORT LEG-LOWER_Default_As Machined_.sldprt | 51.5 KB |
| 110 | MirrorMirrorSUPPORT LEG-UPPER_Default_As Machined_.SLDASM | 34.9 KB |
| 111 | MirrorMirrorSUPPORT LEG-UPPER_Default_As Machined_.SLDPRT | 26.7 KB |
| 112 | MirrorMirrorSUPPORT LEG-UPPER_Default_As Machined_.sldprt | 122 KB |
| 113 | MirrorMirrorSUPPORT LEG-UPPER_Default_As Machined__2.SLDPRT | 25.4 KB |
| 114 | MirrorMirrorSUPPORT LEG-UPPER_Default_As Machined__3.SLDPRT | 25.6 KB |
| 115 | MirrorSUPPORT LEG ASSEMBLY.SLDASM | 36.2 KB |
| 116 | MirrorSUPPORT LEG ASSEMBLY.sldasm | 27.5 KB |
| 117 | MirrorSUPPORT LEG ASSEMBLY1.SLDASM | 38.5 KB |
| 118 | MirrorSUPPORT LEG ASSEMBLY1.sldasm | 39.5 KB |
| 119 | MirrorSUPPORT LEG-LOWER_Default_As Machined_.SLDPRT | 25.7 KB |
| 120 | MirrorSUPPORT LEG-LOWER_Default_As Machined_.sldprt | 51.5 KB |
| 121 | MirrorSUPPORT LEG-UPPER_Default_As Machined_.SLDASM | 35.3 KB |
| 122 | MirrorSUPPORT LEG-UPPER_Default_As Machined_.SLDPRT | 26.1 KB |
| 123 | MirrorSUPPORT LEG-UPPER_Default_As Machined_.sldprt | 121 KB |
| 124 | MirrorSUPPORT LEG-UPPER_Default_As Machined__2.SLDPRT | 25.8 KB |
| 125 | MirrorSUPPORT LEG-UPPER_Default_As Machined__3.SLDPRT | 25.1 KB |
| 126 | PLATE, .25.SLDPRT | 21.4 KB |
| 127 | PLATE, .25.sldprt | 37.5 KB |
| 128 | PLATFORM, EXTRUSION -CUT.SLDPRT | 36.3 KB |
| 129 | PLATFORM, EXTRUSION -CUT.sldprt | 77 KB |
| 130 | PLATFORM, EXTRUSION .sldprt | 112 KB |
| 131 | PLATFORM, EXTRUSION.SLDPRT | 55.4 KB |
| 132 | PLATFORM, WELDMENT_Default_As Machined_.SLDASM | 34.9 KB |
| 133 | PLATFORM, WELDMENT_Default_As Machined_.SLDPRT | 25.2 KB |
| 134 | PLATFORM, WELDMENT_Default_As Machined_.sldprt | 127 KB |
| 135 | PLATFORM, WELDMENT_Default_As Machined__2.SLDPRT | 25.6 KB |
| 136 | PLATFORM, WELDMENT_Default_As Machined__3.SLDPRT | 25.6 KB |
| 137 | PLATFORM, WELDMENT_Default_As Machined__4.SLDPRT | 24 KB |
| 138 | PLATFORM.SLDASM | 37.1 KB |
| 139 | PLATFORM.sldasm | 34.5 KB |
| 140 | STAIR HANDRAIL_Default_As Machined_.SLDASM | 35.2 KB |
| 141 | STAIR HANDRAIL_Default_As Machined_.SLDPRT | 24.9 KB |
| 142 | STAIR HANDRAIL_Default_As Machined_.sldprt | 71.5 KB |
| 143 | STAIR HANDRAIL_Default_As Machined__2.SLDPRT | 25.2 KB |
| 144 | STEP ASSEMBLY.SLDASM | 35.9 KB |
| 145 | STEP ASSEMBLY.sldasm | 28 KB |
| 146 | SUPPORT LEG ASSEMBLY.SLDASM | 37.9 KB |
| 147 | SUPPORT LEG ASSEMBLY.sldasm | 39 KB |
| 148 | SUPPORT LEG-LOWER_Default_As Machined_.SLDPRT | 25.8 KB |
| 149 | SUPPORT LEG-LOWER_Default_As Machined_.sldprt | 51 KB |
| 150 | SUPPORT LEG-UPPER_Default_As Machined_.SLDASM | 35.7 KB |
| 151 | SUPPORT LEG-UPPER_Default_As Machined_.SLDPRT | 25.4 KB |
| 152 | SUPPORT LEG-UPPER_Default_As Machined_.sldprt | 121 KB |
| 153 | SUPPORT LEG-UPPER_Default_As Machined__2.SLDPRT | 26.4 KB |
| 154 | SUPPORT LEG-UPPER_Default_As Machined__3.SLDPRT | 27.3 KB |
| 155 | SUPPORT STRUCTURE, ASSEMBLY.SLDASM | 37.2 KB |
| 156 | SUPPORT STRUCTURE, ASSEMBLY.sldasm | 29.5 KB |
| 157 | SUPPORT STRUCTURE, LEG_Default_As Machined_.SLDASM | 34.8 KB |
| 158 | SUPPORT STRUCTURE, LEG_Default_As Machined_.SLDPRT | 24.7 KB |
| 159 | SUPPORT STRUCTURE, LEG_Default_As Machined_.sldprt | 93.5 KB |
| 160 | SUPPORT STRUCTURE, LEG_Default_As Machined__2.SLDPRT | 25.4 KB |
| 161 | SUPPORT STRUCTURE, LEG_Default_As Machined__3.SLDPRT | 25.1 KB |
| 162 | SUPPORT TUBE, GASSTRUT MOUNT_Default_As Machined_.SLDPRT | 21.5 KB |
| 163 | SUPPORT TUBE, GASSTRUT MOUNT_Default_As Machined_.sldprt | 35 KB |
| 164 | T-SLOT EXTRUSION 153.19IN W.SLDPRT | 32 KB |
| 165 | T-SLOT EXTRUSION 153.19IN W.sldprt | 66.5 KB |
| 166 | T-SLOT EXTRUSION 153.19IN W_2.SLDPRT | 32.2 KB |
| 167 | T-SLOT EXTRUSION 153.19IN W_DATAKIT_179.sldprt | 66.5 KB |
| 168 | T-SLOT EXTRUSION 96IN W.SLDPRT | 31.1 KB |
| 169 | T-SLOT EXTRUSION 96IN W.sldprt | 66.5 KB |
| 170 | T-SLOT EXTRUSION 96IN W_2.SLDPRT | 31.6 KB |
| 171 | T-SLOT EXTRUSION 96IN W_DATAKIT_101.sldprt | 63 KB |
| 172 | TAB, HINGE.SLDPRT | 20.8 KB |
| 173 | TAB, HINGE.sldprt | 31.5 KB |
| 174 | TAB, MOUNT.SLDPRT | 20.9 KB |
| 175 | TAB, MOUNT.sldprt | 31.5 KB |
| 176 | TOP PLATE.SLDPRT | 19.3 KB |
| 177 | TOP PLATE.sldprt | 29.5 KB |
| 178 | TUBE, RECT., 3 X 1 X .125_Default_As Machined_.SLDPRT | 24.6 KB |
| 179 | TUBE, RECT., 3 X 1 X .125_Default_As Machined_.sldprt | 48 KB |
| 180 | TUBE, RECT., 4 X 1 X .125 X 66LG_Default_As Machined_.SLDPRT | 21.2 KB |
| 181 | TUBE, RECT., 4 X 1 X .125 X 66LG_Default_As Machined_.sldprt | 35 KB |
| 182 | TUBE, SQ., 2 X 2 X .19 X 145.19LG_Default_As Machined_.SLDPRT | 25.5 KB |
| 183 | TUBE, SQ., 2 X 2 X .19 X 145.19LG_Default_As Machined_.sldprt | 42.5 KB |
| 184 | TUBE. RECT., 2 X 1_Default_As Machined_.SLDPRT | 22.8 KB |
| 185 | TUBE. RECT., 2 X 1_Default_As Machined_.sldprt | 34 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要150金币
图纸ID：582124
文件大小：10.77M
软件版本：STEP,SOLIDWORKS 2021
图纸格式：sldprt,sldasm,step
参数/编辑：可修改，包括参数
上传时间：2024-06-29
图纸介绍：
发布者
屿双网aevv
作品: 2826
粉丝: 16
![EK丝杆支撑座[EK5]](https://yushuangwang2.oss-accelerate.aliyuncs.com/fileimg/m6767c599c750e/01_home.jpg)
![AL系列油雾器[AC1500]](https://yushuangwang2.oss-accelerate.aliyuncs.com/fileimg/m67678f1d54261/01_home.jpg)
![CNC高精密自紧钻夹头[C20-13]](https://yushuangwang2.oss-accelerate.aliyuncs.com/fileimg/m67babada79d44/01_home.jpg)
提示
×
下载该图档需要消耗150金币！
确认下载
客服
签到
分享
