微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
箱式振动筛（ID:588512）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | C 215.SLDASM | 64.7 KB |
| 2 | C 215.sldasm | 120 KB |
| 3 | C 218.SLDASM | 63.5 KB |
| 4 | C 218.sldasm | 112 KB |
| 5 | C 3120.SLDASM | 5.64 MB |
| 6 | C 3120.STEP | 16 MB |
| 7 | C 3120.sldasm | 32 KB |
| 8 | bearing assembly.SLDASM | 42.7 KB |
| 9 | bearing assembly.sldasm | 93.5 KB |
| 10 | bearing housing.SLDPRT | 32.4 KB |
| 11 | bearing housing.sldprt | 123 KB |
| 12 | bearing inner cap.SLDPRT | 22.7 KB |
| 13 | bearing inner cap.sldprt | 56 KB |
| 14 | bearing outer cap 2.0.SLDPRT | 23.3 KB |
| 15 | bearing outer cap 2.0.sldprt | 66.5 KB |
| 16 | bearing shim.SLDPRT | 18.8 KB |
| 17 | bearing shim.sldprt | 29 KB |
| 18 | belt shiled.SLDPRT | 31.7 KB |
| 19 | belt shiled.sldprt | 51.5 KB |
| 20 | centre spring 2.18.3.SLDPRT | 52 KB |
| 21 | centre spring 2.18.3.sldprt | 81.5 KB |
| 22 | chute tray 2.15.3.SLDPRT | 54.7 KB |
| 23 | chute tray 2.15.3.sldprt | 111 KB |
| 24 | chute tray 2.18.2.SLDPRT | 54.8 KB |
| 25 | chute tray 2.18.2.sldprt | 111 KB |
| 26 | collection chute 215_Default_As Machined_.SLDASM | 35.5 KB |
| 27 | collection chute 215_Default_As Machined_.SLDPRT | 24 KB |
| 28 | collection chute 215_Default_As Machined_.sldprt | 117 KB |
| 29 | collection chute 215_Default_As Machined__2.SLDPRT | 23.4 KB |
| 30 | collection chute 215_Default_As Machined__3.SLDPRT | 22.7 KB |
| 31 | collection chute 215_Default_As Machined__4.SLDPRT | 38.2 KB |
| 32 | collection chute 215_Default_As Machined__5.SLDPRT | 22.6 KB |
| 33 | collection chute 218_Default_As Machined_.SLDASM | 35.4 KB |
| 34 | collection chute 218_Default_As Machined_.SLDPRT | 23.3 KB |
| 35 | collection chute 218_Default_As Machined_.sldprt | 117 KB |
| 36 | collection chute 218_Default_As Machined__2.SLDPRT | 22.8 KB |
| 37 | collection chute 218_Default_As Machined__3.SLDPRT | 38 KB |
| 38 | collection chute 218_Default_As Machined__4.SLDPRT | 22.6 KB |
| 39 | collection chute 218_Default_As Machined__5.SLDPRT | 22.9 KB |
| 40 | collection tray 215.SLDPRT | 37.3 KB |
| 41 | collection tray 215.sldprt | 77 KB |
| 42 | drive belt.SLDPRT | 23.1 KB |
| 43 | drive belt.sldprt | 40.5 KB |
| 44 | foundation.SLDPRT | 47.2 KB |
| 45 | foundation.sldprt | 111 KB |
| 46 | front cover.SLDPRT | 42.4 KB |
| 47 | front cover.sldprt | 85.5 KB |
| 48 | hex flange bolt_is12_IS 15582 - M16 x 110 x 110-N.SLDPRT | 41.1 KB |
| 49 | hex flange bolt_is12_IS 15582 - M16 x 110 x 110-N.sldprt | 72.5 KB |
| 50 | hhs(grade c)_is_IS 1363(Part2) - M12 x 45-WN.SLDPRT | 27.6 KB |
| 51 | hhs(grade c)_is_IS 1363(Part2) - M12 x 45-WN.sldprt | 54.5 KB |
| 52 | hopper tray 2.18.3.SLDASM | 34.9 KB |
| 53 | hopper tray 2.18.3.SLDPRT | 22.9 KB |
| 54 | hopper tray 2.18.3.sldprt | 131 KB |
| 55 | hopper tray 2.18.3_2.SLDPRT | 22.2 KB |
| 56 | hopper tray 2.18.3_3.SLDPRT | 33.1 KB |
| 57 | hopper tray 2.18.3_4.SLDPRT | 21.9 KB |
| 58 | hopper tray 2.18.3_5.SLDPRT | 22.4 KB |
| 59 | hopper tray 2.18.3_6.SLDPRT | 23.1 KB |
| 60 | lip seal.SLDASM | 34.3 KB |
| 61 | lip seal.SLDPRT | 39.2 KB |
| 62 | lip seal.sldprt | 111 KB |
| 63 | lip seal_2.SLDPRT | 31.2 KB |
| 64 | load mount cap.SLDPRT | 23 KB |
| 65 | load mount cap.sldprt | 44.5 KB |
| 66 | load mount.SLDASM | 34.3 KB |
| 67 | load mount.SLDPRT | 18.6 KB |
| 68 | load mount.sldprt | 68.5 KB |
| 69 | load mount_2.SLDPRT | 41.9 KB |
| 70 | lock slide 2.SLDPRT | 24.9 KB |
| 71 | lock slide 2.sldprt | 54 KB |
| 72 | lock slide.SLDPRT | 24.8 KB |
| 73 | lock slide.sldprt | 54 KB |
| 74 | mesh clamp 2.18.3.SLDPRT | 24.8 KB |
| 75 | mesh clamp 2.18.3.sldprt | 51 KB |
| 76 | mesh frame 2.18.3_Default_As Machined_.SLDASM | 37 KB |
| 77 | mesh frame 2.18.3_Default_As Machined_.SLDPRT | 24 KB |
| 78 | mesh frame 2.18.3_Default_As Machined_.sldprt | 408 KB |
| 79 | mesh frame 2.18.3_Default_As Machined__10.SLDPRT | 31.9 KB |
| 80 | mesh frame 2.18.3_Default_As Machined__2.SLDPRT | 23.2 KB |
| 81 | mesh frame 2.18.3_Default_As Machined__3.SLDPRT | 23 KB |
| 82 | mesh frame 2.18.3_Default_As Machined__4.SLDPRT | 114 KB |
| 83 | mesh frame 2.18.3_Default_As Machined__5.SLDPRT | 31.4 KB |
| 84 | mesh frame 2.18.3_Default_As Machined__6.SLDPRT | 24 KB |
| 85 | mesh frame 2.18.3_Default_As Machined__7.SLDPRT | 24.2 KB |
| 86 | mesh frame 2.18.3_Default_As Machined__8.SLDPRT | 24.5 KB |
| 87 | mesh frame 2.18.3_Default_As Machined__9.SLDPRT | 22.9 KB |
| 88 | mesh retainer.SLDPRT | 25.2 KB |
| 89 | mesh retainer.sldprt | 56 KB |
| 90 | motor -pulley.SLDPRT | 23.3 KB |
| 91 | motor -pulley.sldprt | 66.5 KB |
| 92 | motor base.SLDASM | 36.6 KB |
| 93 | motor base.SLDPRT | 25.8 KB |
| 94 | motor base.sldasm | 28 KB |
| 95 | motor base.sldprt | 81.5 KB |
| 96 | motor base_2.SLDASM | 34.6 KB |
| 97 | motor base_2.SLDPRT | 24.8 KB |
| 98 | motor.SLDPRT | 450 KB |
| 99 | motor.sldprt | 994 KB |
| 100 | pipe unit.SLDPRT | 28.3 KB |
| 101 | pipe unit.sldprt | 102 KB |
| 102 | pulley.SLDPRT | 22.9 KB |
| 103 | pulley.sldprt | 66.5 KB |
| 104 | retaining ring.SLDPRT | 19.3 KB |
| 105 | retaining ring.sldprt | 29 KB |
| 106 | screen shaft.SLDPRT | 31.4 KB |
| 107 | screen shaft.sldprt | 84.5 KB |
| 108 | self aligning roller bearing_is_IS 6454 SA - 23-100-S.SLDPRT | 37.4 KB |
| 109 | self aligning roller bearing_is_IS 6454 SA - 23-100-S.sldprt | 96 KB |
| 110 | side cap.SLDPRT | 68.1 KB |
| 111 | side cap.sldprt | 128 KB |
| 112 | side reinforcement plate 2.15.3 L.SLDPRT | 35 KB |
| 113 | side reinforcement plate 2.15.3 L.sldprt | 106 KB |
| 114 | side reinforcement plate 2.15.3.SLDPRT | 34.1 KB |
| 115 | side reinforcement plate 2.15.3.sldprt | 106 KB |
| 116 | side reinforcement plate 2.18.3 L.SLDPRT | 33.8 KB |
| 117 | side reinforcement plate 2.18.3 L.sldprt | 105 KB |
| 118 | side reinforcement plate 2.18.3.SLDPRT | 34.2 KB |
| 119 | side reinforcement plate 2.18.3.sldprt | 105 KB |
| 120 | side sheet 2.15 L.SLDPRT | 47.7 KB |
| 121 | side sheet 2.15 L.sldprt | 235 KB |
| 122 | side sheet 2.15 R.SLDPRT | 47.6 KB |
| 123 | side sheet 2.15 R.sldprt | 235 KB |
| 124 | side sheet 2.18.3 L.SLDPRT | 49.6 KB |
| 125 | side sheet 2.18.3 L.sldprt | 241 KB |
| 126 | side sheet 2.18.3R.SLDPRT | 49 KB |
| 127 | side sheet 2.18.3R.sldprt | 242 KB |
| 128 | spring 2.18.3.SLDPRT | 48.7 KB |
| 129 | spring 2.18.3.sldprt | 74.5 KB |
| 130 | spring base 2.18.3.SLDPRT | 87.9 KB |
| 131 | spring base 2.18.3.sldprt | 206 KB |
| 132 | spring lock washer 3063_is_IS 3063- 12-B.SLDPRT | 25.7 KB |
| 133 | spring lock washer 3063_is_IS 3063- 12-B.sldprt | 42 KB |
| 134 | spring mount -leg 2.18.3 -L2_Default_As Machined_.SLDASM | 34.8 KB |
| 135 | spring mount -leg 2.18.3 -L2_Default_As Machined_.SLDPRT | 32.6 KB |
| 136 | spring mount -leg 2.18.3 -L2_Default_As Machined_.sldprt | 128 KB |
| 137 | spring mount -leg 2.18.3 -L2_Default_As Machined__2.SLDPRT | 20.7 KB |
| 138 | spring mount -leg 2.18.3 -L2_Default_As Machined__3.SLDPRT | 32.2 KB |
| 139 | spring mount -leg 2.18.3 -L_Default_As Machined_.SLDASM | 35 KB |
| 140 | spring mount -leg 2.18.3 -L_Default_As Machined_.SLDPRT | 31.8 KB |
| 141 | spring mount -leg 2.18.3 -L_Default_As Machined_.sldprt | 132 KB |
| 142 | spring mount -leg 2.18.3 -L_Default_As Machined__2.SLDPRT | 20.5 KB |
| 143 | spring mount -leg 2.18.3 -L_Default_As Machined__3.SLDPRT | 33.8 KB |
| 144 | spring mount -leg 2.18.3 -r2_Default_As Machined_.SLDASM | 35.1 KB |
| 145 | spring mount -leg 2.18.3 -r2_Default_As Machined_.SLDPRT | 20.1 KB |
| 146 | spring mount -leg 2.18.3 -r2_Default_As Machined_.sldprt | 128 KB |
| 147 | spring mount -leg 2.18.3 -r2_Default_As Machined__2.SLDPRT | 32.6 KB |
| 148 | spring mount -leg 2.18.3 -r2_Default_As Machined__3.SLDPRT | 32.6 KB |
| 149 | spring mount -leg 2.18.3 -r_Default_As Machined_.SLDASM | 34.7 KB |
| 150 | spring mount -leg 2.18.3 -r_Default_As Machined_.SLDPRT | 33.4 KB |
| 151 | spring mount -leg 2.18.3 -r_Default_As Machined_.sldprt | 132 KB |
| 152 | spring mount -leg 2.18.3 -r_Default_As Machined__2.SLDPRT | 31.9 KB |
| 153 | spring mount -leg 2.18.3 -r_Default_As Machined__3.SLDPRT | 20.3 KB |
| 154 | spring mount -leg 215 L1_Default_As Machined_.SLDASM | 35.4 KB |
| 155 | spring mount -leg 215 L1_Default_As Machined_.SLDPRT | 20 KB |
| 156 | spring mount -leg 215 L1_Default_As Machined_.sldprt | 133 KB |
| 157 | spring mount -leg 215 L1_Default_As Machined__2.SLDPRT | 33.4 KB |
| 158 | spring mount -leg 215 L1_Default_As Machined__3.SLDPRT | 33.2 KB |
| 159 | spring mount -leg 215 L2_Default_As Machined_.SLDASM | 35.8 KB |
| 160 | spring mount -leg 215 L2_Default_As Machined_.SLDPRT | 20.2 KB |
| 161 | spring mount -leg 215 L2_Default_As Machined_.sldprt | 129 KB |
| 162 | spring mount -leg 215 L2_Default_As Machined__2.SLDPRT | 33 KB |
| 163 | spring mount -leg 215 L2_Default_As Machined__3.SLDPRT | 32.9 KB |
| 164 | spring mount -leg 215 R1_Default_As Machined_.SLDASM | 35.4 KB |
| 165 | spring mount -leg 215 R1_Default_As Machined_.SLDPRT | 21.1 KB |
| 166 | spring mount -leg 215 R1_Default_As Machined_.sldprt | 133 KB |
| 167 | spring mount -leg 215 R1_Default_As Machined__2.SLDPRT | 32.5 KB |
| 168 | spring mount -leg 215 R1_Default_As Machined__3.SLDPRT | 33.9 KB |
| 169 | spring mount -leg 215 R2_Default_As Machined_.SLDASM | 35 KB |
| 170 | spring mount -leg 215 R2_Default_As Machined_.SLDPRT | 20.6 KB |
| 171 | spring mount -leg 215 R2_Default_As Machined_.sldprt | 128 KB |
| 172 | spring mount -leg 215 R2_Default_As Machined__2.SLDPRT | 32.1 KB |
| 173 | spring mount -leg 215 R2_Default_As Machined__3.SLDPRT | 32.5 KB |
| 174 | stand 2.SLDPRT | 27.8 KB |
| 175 | stand 2.sldprt | 56.5 KB |
| 176 | stand.SLDPRT | 27.4 KB |
| 177 | stand.sldprt | 53 KB |
| 178 | unbalance weight.SLDPRT | 31.9 KB |
| 179 | unbalance weight.sldprt | 68.5 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要155金币
图纸ID：588512
文件大小：14.27M
软件版本：STEP,SOLIDWORKS 2021
图纸格式：sldasm,step,sldprt
参数/编辑：可修改，包括参数
上传时间：2024-07-02
图纸介绍：
发布者
屿双网drld
作品: 3397
粉丝: 31
提示
×
下载该图档需要消耗155金币！
确认下载
客服
签到
分享
