微信扫码登录
作者其它图纸
查看更多
猜你喜欢
活动福利+发布图纸
登录注册
114-水稻移栽机（ID:840119）
| # | 文件名称 | 文件大小 |
|---|---|---|
| 1 | 20mm Pipe 500 length.SLDPRT | 21.3 KB |
| 2 | 20mm Pipe 500 length.sldprt | 33.5 KB |
| 3 | 300mm shaft 25 mm dia.SLDPRT | 19.2 KB |
| 4 | 300mm shaft 25 mm dia.sldprt | 27 KB |
| 5 | 52 teeth sprocket.SLDPRT | 372 KB |
| 6 | 52 teeth sprocket.sldprt | 1.3 MB |
| 7 | Angle 1333.SLDPRT | 21.4 KB |
| 8 | Angle 1333.sldprt | 37 KB |
| 9 | Assem1^Paddy Transplanter.SLDASM | 41.7 KB |
| 10 | Assem1^Paddy Transplanter.sldasm | 24 KB |
| 11 | Back Base 1st top.SLDPRT | 17.9 KB |
| 12 | Back Base 1st top.sldprt | 27 KB |
| 13 | Back Base.SLDPRT | 18.9 KB |
| 14 | Back Base.sldprt | 26.5 KB |
| 15 | Back Side Tray.SLDPRT | 24.2 KB |
| 16 | Back Side Tray.sldprt | 45 KB |
| 17 | Bearing Case Front Wheel.SLDPRT | 21.9 KB |
| 18 | Bearing Case Front Wheel.sldprt | 44.5 KB |
| 19 | Bigtray.SLDPRT | 26.7 KB |
| 20 | Bigtray.sldprt | 51.5 KB |
| 21 | Drive paddy feeder.SLDPRT | 23.6 KB |
| 22 | Drive paddy feeder.sldprt | 41 KB |
| 23 | Exotech text.SLDASM | 37.9 KB |
| 24 | Exotech text.SLDPRT | 41.1 KB |
| 25 | Exotech text.sldprt | 570 KB |
| 26 | Exotech text_10.SLDPRT | 54.6 KB |
| 27 | Exotech text_11.SLDPRT | 42.8 KB |
| 28 | Exotech text_12.SLDPRT | 47.7 KB |
| 29 | Exotech text_13.SLDPRT | 42 KB |
| 30 | Exotech text_14.SLDPRT | 32.2 KB |
| 31 | Exotech text_2.SLDPRT | 30.8 KB |
| 32 | Exotech text_3.SLDPRT | 31.4 KB |
| 33 | Exotech text_4.SLDPRT | 36.6 KB |
| 34 | Exotech text_5.SLDPRT | 42.1 KB |
| 35 | Exotech text_6.SLDPRT | 33.4 KB |
| 36 | Exotech text_7.SLDPRT | 31.4 KB |
| 37 | Exotech text_8.SLDPRT | 40.2 KB |
| 38 | Exotech text_9.SLDPRT | 42 KB |
| 39 | Feder Pipe RHS.SLDASM | 38.1 KB |
| 40 | Feder Pipe RHS.sldasm | 34 KB |
| 41 | Feder Pipe RHS_2.SLDASM | 38 KB |
| 42 | Feder Pipe RHS_DATAKIT_661.sldasm | 34 KB |
| 43 | Feder feont back 20 mm round block.SLDPRT | 19.9 KB |
| 44 | Feder feont back 20 mm round block.sldprt | 33.5 KB |
| 45 | Feder rod pipe assembly.SLDASM | 39.5 KB |
| 46 | Feder rod pipe assembly.sldasm | 43.5 KB |
| 47 | Feder rod pipe assembly_2.SLDASM | 39.6 KB |
| 48 | Feder rod pipe assembly_DATAKIT_196.sldasm | 44 KB |
| 49 | Feeder Upper Pipe Vertical motion.SLDPRT | 23.2 KB |
| 50 | Feeder Upper Pipe Vertical motion.sldprt | 55 KB |
| 51 | Feeder pipe sup 20mm.SLDPRT | 22.7 KB |
| 52 | Feeder pipe sup 20mm.sldprt | 46.5 KB |
| 53 | Feeder pipe weld nut.SLDPRT | 64.1 KB |
| 54 | Feeder pipe weld nut.sldprt | 110 KB |
| 55 | Feeder rod.SLDPRT | 784 KB |
| 56 | Feeder rod.sldprt | 575 KB |
| 57 | Feeder updown rod RHS.SLDPRT | 20.4 KB |
| 58 | Feeder updown rod RHS.sldprt | 39 KB |
| 59 | Fibre Roller.SLDPRT | 20 KB |
| 60 | Fibre Roller.sldprt | 42.5 KB |
| 61 | Gear Box.SLDASM | 36.4 KB |
| 62 | Gear Box.sldasm | 29 KB |
| 63 | HONDA GX160.SLDPRT | 2.21 MB |
| 64 | HONDA GX160.sldprt | 3.1 MB |
| 65 | Head Block.SLDPRT | 19.7 KB |
| 66 | Head Block.sldprt | 31.5 KB |
| 67 | Head Long Pipe_Default_As Machined_.SLDPRT | 24.5 KB |
| 68 | Head Long Pipe_Default_As Machined_.sldprt | 42.5 KB |
| 69 | Head Patti.SLDPRT | 22.4 KB |
| 70 | Head Patti.sldprt | 37.5 KB |
| 71 | Head Pipe Assly.SLDASM | 37.1 KB |
| 72 | Head Pipe Assly.sldasm | 28 KB |
| 73 | Head Pipe Assly_2.SLDASM | 36.9 KB |
| 74 | Head Pipe Assly_3.SLDASM | 36.8 KB |
| 75 | Head Pipe Assly_4.SLDASM | 36.8 KB |
| 76 | Head Pipe Assly_DATAKIT_265.sldasm | 28 KB |
| 77 | Head Pipe Assly_DATAKIT_287.sldasm | 28 KB |
| 78 | Head Pipe Assly_DATAKIT_497.sldasm | 28 KB |
| 79 | Head Pipe.SLDPRT | 34.3 KB |
| 80 | Head Pipe.sldprt | 65.5 KB |
| 81 | Hex. Nut M12.SLDPRT | 65.3 KB |
| 82 | Hex. Nut M12.sldprt | 138 KB |
| 83 | Housing.SLDPRT | 352 KB |
| 84 | Housing.sldprt | 546 KB |
| 85 | IR.SLDPRT | 22.8 KB |
| 86 | IR.sldprt | 44.5 KB |
| 87 | Inner link 1 - Copy.SLDPRT | 43.4 KB |
| 88 | Inner link 1 - Copy.sldprt | 76.5 KB |
| 89 | Inner link 1.SLDPRT | 43.5 KB |
| 90 | Inner link 1.sldprt | 76.5 KB |
| 91 | Inner race.SLDPRT | 24.6 KB |
| 92 | Inner race.sldprt | 45 KB |
| 93 | Logo assembly ESPL.SLDASM | 38.5 KB |
| 94 | Logo assembly ESPL.sldasm | 29 KB |
| 95 | M10 Bolt.SLDPRT | 73.7 KB |
| 96 | M10 Bolt.sldprt | 151 KB |
| 97 | M10 Nut.SLDPRT | 52.3 KB |
| 98 | M10 Nut.sldprt | 84 KB |
| 99 | Nylon Lock.SLDPRT | 20.5 KB |
| 100 | Nylon Lock.sldprt | 31.5 KB |
| 101 | OR.SLDPRT | 20.6 KB |
| 102 | OR.sldprt | 42 KB |
| 103 | Ovel Cut 2nd top.SLDPRT | 22.2 KB |
| 104 | Ovel Cut 2nd top.sldprt | 31.5 KB |
| 105 | Paddy Feeder pipe small.SLDPRT | 19.1 KB |
| 106 | Paddy Feeder pipe small.sldprt | 30.5 KB |
| 107 | Paddy Lower Block.SLDPRT | 19 KB |
| 108 | Paddy Lower Block.sldprt | 30 KB |
| 109 | Paddy Side Sliding Strip 1.5 mm Aluminium Sheet.SLDPRT | 37.9 KB |
| 110 | Paddy Side Sliding Strip 1.5 mm Aluminium Sheet.sldprt | 100 KB |
| 111 | Paddy Sliding Tray.SLDPRT | 72.6 KB |
| 112 | Paddy Sliding Tray.sldprt | 257 KB |
| 113 | Paddy Transplanter.SLDASM | 17.6 MB |
| 114 | Paddy Transplanter.STEP | 65 MB |
| 115 | Paddy Transplanter.err | 11.8 KB |
| 116 | Paddy Transplanter.sldasm | 324 KB |
| 117 | Paddy rolling patti.SLDPRT | 24.5 KB |
| 118 | Paddy rolling patti.sldprt | 49.5 KB |
| 119 | Pipe 350_Default_As Machined_.SLDASM | 34.1 KB |
| 120 | Pipe 350_Default_As Machined_.SLDPRT | 23.9 KB |
| 121 | Pipe 350_Default_As Machined_.sldprt | 49 KB |
| 122 | Pipe 350_Default_As Machined__2.SLDPRT | 20.3 KB |
| 123 | Rear Shaft.SLDPRT | 19.9 KB |
| 124 | Rear Shaft.sldprt | 33 KB |
| 125 | Roller Pipe.SLDPRT | 22 KB |
| 126 | Roller Pipe.sldprt | 41.5 KB |
| 127 | Sliding paddy tray assembly.SLDASM | 51.9 KB |
| 128 | Sliding paddy tray assembly.sldasm | 37.5 KB |
| 129 | Small Pipe 40mm_Default_As Machined_.SLDPRT | 27.3 KB |
| 130 | Small Pipe 40mm_Default_As Machined_.sldprt | 51 KB |
| 131 | Small Shaft 2Nos.SLDPRT | 18.9 KB |
| 132 | Small Shaft 2Nos.sldprt | 27 KB |
| 133 | Spring For Suspension.SLDPRT | 45 KB |
| 134 | Spring For Suspension.sldprt | 63.5 KB |
| 135 | Sprocket 42 Teeth.SLDPRT | 251 KB |
| 136 | Sprocket 42 Teeth.sldprt | 692 KB |
| 137 | Sprocket For Engine.SLDASM | 34.3 KB |
| 138 | Sprocket For Engine.SLDPRT | 19 KB |
| 139 | Sprocket For Engine.sldprt | 156 KB |
| 140 | Sprocket For Engine_2.SLDPRT | 65.9 KB |
| 141 | Tapered Bolt.SLDPRT | 1.03 MB |
| 142 | Tapered Bolt.sldprt | 608 KB |
| 143 | Top arrow.SLDPRT | 25.9 KB |
| 144 | Top arrow.sldprt | 45 KB |
| 145 | UCP 204.SLDASM | 34.8 KB |
| 146 | UCP 204.sldasm | 24.5 KB |
| 147 | UCP 204_2.SLDASM | 34.8 KB |
| 148 | UCP 204_3.SLDASM | 34.3 KB |
| 149 | UCP 204_4.SLDASM | 34.8 KB |
| 150 | UCP 204_5.SLDASM | 35.3 KB |
| 151 | UCP 204_6.SLDASM | 35.5 KB |
| 152 | UCP 204_DATAKIT_373.sldasm | 25 KB |
| 153 | UCP 204_DATAKIT_380.sldasm | 25 KB |
| 154 | UCP 204_DATAKIT_402.sldasm | 25 KB |
| 155 | UCP 204_DATAKIT_433.sldasm | 25 KB |
| 156 | UCP 204_DATAKIT_510.sldasm | 25 KB |
| 157 | Weldment frame_Default_As Machined_.SLDASM | 52.9 KB |
| 158 | Weldment frame_Default_As Machined_.SLDPRT | 25.1 KB |
| 159 | Weldment frame_Default_As Machined_.sldprt | 1.9 MB |
| 160 | Weldment frame_Default_As Machined__10.SLDPRT | 25.8 KB |
| 161 | Weldment frame_Default_As Machined__11.SLDPRT | 23.3 KB |
| 162 | Weldment frame_Default_As Machined__12.SLDPRT | 34.8 KB |
| 163 | Weldment frame_Default_As Machined__13.SLDPRT | 25.5 KB |
| 164 | Weldment frame_Default_As Machined__14.SLDPRT | 24.7 KB |
| 165 | Weldment frame_Default_As Machined__15.SLDPRT | 24.8 KB |
| 166 | Weldment frame_Default_As Machined__16.SLDPRT | 24.6 KB |
| 167 | Weldment frame_Default_As Machined__17.SLDPRT | 34.9 KB |
| 168 | Weldment frame_Default_As Machined__18.SLDPRT | 20.3 KB |
| 169 | Weldment frame_Default_As Machined__19.SLDPRT | 25.9 KB |
| 170 | Weldment frame_Default_As Machined__2.SLDPRT | 25 KB |
| 171 | Weldment frame_Default_As Machined__20.SLDPRT | 25.5 KB |
| 172 | Weldment frame_Default_As Machined__21.SLDPRT | 25.6 KB |
| 173 | Weldment frame_Default_As Machined__22.SLDPRT | 24.6 KB |
| 174 | Weldment frame_Default_As Machined__23.SLDPRT | 25.4 KB |
| 175 | Weldment frame_Default_As Machined__24.SLDPRT | 24.7 KB |
| 176 | Weldment frame_Default_As Machined__25.SLDPRT | 25 KB |
| 177 | Weldment frame_Default_As Machined__26.SLDPRT | 24.6 KB |
| 178 | Weldment frame_Default_As Machined__27.SLDPRT | 25 KB |
| 179 | Weldment frame_Default_As Machined__28.SLDPRT | 25.6 KB |
| 180 | Weldment frame_Default_As Machined__29.SLDPRT | 26.6 KB |
| 181 | Weldment frame_Default_As Machined__3.SLDPRT | 25.4 KB |
| 182 | Weldment frame_Default_As Machined__30.SLDPRT | 25.1 KB |
| 183 | Weldment frame_Default_As Machined__31.SLDPRT | 24.8 KB |
| 184 | Weldment frame_Default_As Machined__32.SLDPRT | 24.6 KB |
| 185 | Weldment frame_Default_As Machined__33.SLDPRT | 25.1 KB |
| 186 | Weldment frame_Default_As Machined__34.SLDPRT | 25.3 KB |
| 187 | Weldment frame_Default_As Machined__35.SLDPRT | 30.6 KB |
| 188 | Weldment frame_Default_As Machined__36.SLDPRT | 28.9 KB |
| 189 | Weldment frame_Default_As Machined__37.SLDPRT | 25.9 KB |
| 190 | Weldment frame_Default_As Machined__38.SLDPRT | 24.8 KB |
| 191 | Weldment frame_Default_As Machined__39.SLDPRT | 24.8 KB |
| 192 | Weldment frame_Default_As Machined__4.SLDPRT | 24.3 KB |
| 193 | Weldment frame_Default_As Machined__40.SLDPRT | 25.3 KB |
| 194 | Weldment frame_Default_As Machined__41.SLDPRT | 24.3 KB |
| 195 | Weldment frame_Default_As Machined__42.SLDPRT | 24.6 KB |
| 196 | Weldment frame_Default_As Machined__43.SLDPRT | 35.4 KB |
| 197 | Weldment frame_Default_As Machined__44.SLDPRT | 25.1 KB |
| 198 | Weldment frame_Default_As Machined__45.SLDPRT | 22.1 KB |
| 199 | Weldment frame_Default_As Machined__46.SLDPRT | 25 KB |
| 200 | Weldment frame_Default_As Machined__47.SLDPRT | 24.5 KB |
| 201 | Weldment frame_Default_As Machined__48.SLDPRT | 25.3 KB |
| 202 | Weldment frame_Default_As Machined__49.SLDPRT | 37.5 KB |
| 203 | Weldment frame_Default_As Machined__5.SLDPRT | 25 KB |
| 204 | Weldment frame_Default_As Machined__50.SLDPRT | 24.4 KB |
| 205 | Weldment frame_Default_As Machined__51.SLDPRT | 24.8 KB |
| 206 | Weldment frame_Default_As Machined__52.SLDPRT | 25.7 KB |
| 207 | Weldment frame_Default_As Machined__53.SLDPRT | 24.2 KB |
| 208 | Weldment frame_Default_As Machined__54.SLDPRT | 25.1 KB |
| 209 | Weldment frame_Default_As Machined__55.SLDPRT | 34.8 KB |
| 210 | Weldment frame_Default_As Machined__56.SLDPRT | 25 KB |
| 211 | Weldment frame_Default_As Machined__57.SLDPRT | 24.7 KB |
| 212 | Weldment frame_Default_As Machined__58.SLDPRT | 25.5 KB |
| 213 | Weldment frame_Default_As Machined__59.SLDPRT | 34.5 KB |
| 214 | Weldment frame_Default_As Machined__6.SLDPRT | 34.5 KB |
| 215 | Weldment frame_Default_As Machined__60.SLDPRT | 25.4 KB |
| 216 | Weldment frame_Default_As Machined__61.SLDPRT | 25.6 KB |
| 217 | Weldment frame_Default_As Machined__62.SLDPRT | 24.4 KB |
| 218 | Weldment frame_Default_As Machined__63.SLDPRT | 25 KB |
| 219 | Weldment frame_Default_As Machined__64.SLDPRT | 24.5 KB |
| 220 | Weldment frame_Default_As Machined__65.SLDPRT | 24.8 KB |
| 221 | Weldment frame_Default_As Machined__66.SLDPRT | 24.2 KB |
| 222 | Weldment frame_Default_As Machined__67.SLDPRT | 24.3 KB |
| 223 | Weldment frame_Default_As Machined__68.SLDPRT | 28.9 KB |
| 224 | Weldment frame_Default_As Machined__69.SLDPRT | 32.8 KB |
| 225 | Weldment frame_Default_As Machined__7.SLDPRT | 24.4 KB |
| 226 | Weldment frame_Default_As Machined__70.SLDPRT | 25.9 KB |
| 227 | Weldment frame_Default_As Machined__71.SLDPRT | 25 KB |
| 228 | Weldment frame_Default_As Machined__72.SLDPRT | 25.1 KB |
| 229 | Weldment frame_Default_As Machined__73.SLDPRT | 34.3 KB |
| 230 | Weldment frame_Default_As Machined__74.SLDPRT | 25.4 KB |
| 231 | Weldment frame_Default_As Machined__75.SLDPRT | 24.7 KB |
| 232 | Weldment frame_Default_As Machined__8.SLDPRT | 28.9 KB |
| 233 | Weldment frame_Default_As Machined__9.SLDPRT | 25.5 KB |
| 234 | Wheel Assly.SLDASM | 39.1 KB |
| 235 | Wheel Assly.sldasm | 34.5 KB |
| 236 | Wheel Assly_2.SLDASM | 39.3 KB |
| 237 | Wheel Assly_DATAKIT_592.sldasm | 34.5 KB |
| 238 | Wheel Bush.SLDPRT | 18.6 KB |
| 239 | Wheel Bush.sldprt | 29 KB |
| 240 | Wheel Nose_Default_As Machined_.SLDASM | 34.8 KB |
| 241 | Wheel Nose_Default_As Machined_.SLDPRT | 21 KB |
| 242 | Wheel Nose_Default_As Machined_.sldprt | 92 KB |
| 243 | Wheel Nose_Default_As Machined__2.SLDPRT | 20.4 KB |
| 244 | Wheel Nose_Default_As Machined__3.SLDPRT | 27.3 KB |
| 245 | Wheel Nose_Default_As Machined__4.SLDPRT | 26.9 KB |
| 246 | Wheel PIpe_Default_As Machined_.SLDASM | 34.7 KB |
| 247 | Wheel PIpe_Default_As Machined_.SLDPRT | 28.1 KB |
| 248 | Wheel PIpe_Default_As Machined_.sldprt | 95.5 KB |
| 249 | Wheel PIpe_Default_As Machined__2.SLDPRT | 32.6 KB |
| 250 | Wheel PIpe_Default_As Machined__3.SLDPRT | 32.5 KB |
| 251 | Whel Pipe ssemblt.SLDASM | 35.3 KB |
| 252 | Whel Pipe ssemblt.sldasm | 25.5 KB |
| 253 | Whel Pipe ssemblt_10.SLDASM | 35.4 KB |
| 254 | Whel Pipe ssemblt_11.SLDASM | 35.7 KB |
| 255 | Whel Pipe ssemblt_12.SLDASM | 35.7 KB |
| 256 | Whel Pipe ssemblt_13.SLDASM | 36.7 KB |
| 257 | Whel Pipe ssemblt_14.SLDASM | 35.6 KB |
| 258 | Whel Pipe ssemblt_15.SLDASM | 36.2 KB |
| 259 | Whel Pipe ssemblt_16.SLDASM | 36 KB |
| 260 | Whel Pipe ssemblt_2.SLDASM | 36.5 KB |
| 261 | Whel Pipe ssemblt_3.SLDASM | 36.7 KB |
| 262 | Whel Pipe ssemblt_4.SLDASM | 35.6 KB |
| 263 | Whel Pipe ssemblt_5.SLDASM | 36.4 KB |
| 264 | Whel Pipe ssemblt_6.SLDASM | 35.5 KB |
| 265 | Whel Pipe ssemblt_7.SLDASM | 36.1 KB |
| 266 | Whel Pipe ssemblt_8.SLDASM | 36.1 KB |
| 267 | Whel Pipe ssemblt_9.SLDASM | 36.1 KB |
| 268 | Whel Pipe ssemblt_DATAKIT_318.sldasm | 26 KB |
| 269 | Whel Pipe ssemblt_DATAKIT_322.sldasm | 26 KB |
| 270 | Whel Pipe ssemblt_DATAKIT_326.sldasm | 26 KB |
| 271 | Whel Pipe ssemblt_DATAKIT_332.sldasm | 26 KB |
| 272 | Whel Pipe ssemblt_DATAKIT_336.sldasm | 26 KB |
| 273 | Whel Pipe ssemblt_DATAKIT_340.sldasm | 26 KB |
| 274 | Whel Pipe ssemblt_DATAKIT_344.sldasm | 26 KB |
| 275 | Whel Pipe ssemblt_DATAKIT_593.sldasm | 26 KB |
| 276 | Whel Pipe ssemblt_DATAKIT_597.sldasm | 26 KB |
| 277 | Whel Pipe ssemblt_DATAKIT_602.sldasm | 26 KB |
| 278 | Whel Pipe ssemblt_DATAKIT_606.sldasm | 26 KB |
| 279 | Whel Pipe ssemblt_DATAKIT_610.sldasm | 26 KB |
| 280 | Whel Pipe ssemblt_DATAKIT_614.sldasm | 26 KB |
| 281 | Whel Pipe ssemblt_DATAKIT_618.sldasm | 26 KB |
| 282 | Whel Pipe ssemblt_DATAKIT_622.sldasm | 26 KB |
| 283 | ball.SLDPRT | 18.3 KB |
| 284 | ball.sldprt | 26.5 KB |
| 285 | bearing block sm.SLDASM | 33.6 KB |
| 286 | bearing block sm.SLDPRT | 18.8 KB |
| 287 | bearing block sm.sldprt | 40 KB |
| 288 | bearing block sm_2.SLDPRT | 20.2 KB |
| 289 | bearing.SLDASM | 39 KB |
| 290 | bearing.sldasm | 43 KB |
| 291 | bearing_2.SLDASM | 39.2 KB |
| 292 | bearing_3.SLDASM | 39 KB |
| 293 | bearing_4.SLDASM | 40.1 KB |
| 294 | bearing_5.SLDASM | 39.3 KB |
| 295 | bearing_DATAKIT_412.sldasm | 43 KB |
| 296 | bearing_DATAKIT_454.sldasm | 43 KB |
| 297 | bearing_DATAKIT_562.sldasm | 43 KB |
| 298 | bearing_DATAKIT_637.sldasm | 43 KB |
| 299 | cover ring.SLDPRT | 21.9 KB |
| 300 | cover ring.sldprt | 34 KB |
| 301 | feeder updown rod mod.SLDPRT | 21.1 KB |
| 302 | feeder updown rod mod.sldprt | 39.5 KB |
| 303 | fibre wheel paddy roller.SLDPRT | 21.6 KB |
| 304 | fibre wheel paddy roller.sldprt | 43 KB |
| 305 | frame paddy tray.SLDASM | 38.8 KB |
| 306 | frame paddy tray.sldasm | 34 KB |
| 307 | head assembly rhs.SLDASM | 39.6 KB |
| 308 | head assembly rhs.sldasm | 34 KB |
| 309 | head assembly rhs_2.SLDASM | 39.2 KB |
| 310 | head assembly rhs_DATAKIT_192.sldasm | 34.5 KB |
| 311 | horizontap pipe_Default_As Machined_.SLDPRT | 21.2 KB |
| 312 | horizontap pipe_Default_As Machined_.sldprt | 34 KB |
| 313 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_01.SLDPRT | 111 KB |
| 314 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_01.sldprt | 186 KB |
| 315 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_02.SLDPRT | 26.3 KB |
| 316 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_02.sldprt | 83.5 KB |
| 317 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_03.SLDPRT | 27.1 KB |
| 318 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_03.sldprt | 55 KB |
| 319 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_04.SLDPRT | 18.4 KB |
| 320 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_04.sldprt | 26.5 KB |
| 321 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_05.SLDPRT | 19.2 KB |
| 322 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_05.sldprt | 26 KB |
| 323 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_06.SLDPRT | 18.9 KB |
| 324 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_06.sldprt | 26.5 KB |
| 325 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_07.SLDPRT | 18.5 KB |
| 326 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_07.sldprt | 26.5 KB |
| 327 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_08.SLDPRT | 23.3 KB |
| 328 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_08.sldprt | 51.5 KB |
| 329 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_09.SLDPRT | 22.4 KB |
| 330 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_09.sldprt | 52 KB |
| 331 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_10.SLDPRT | 20.6 KB |
| 332 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_10.sldprt | 47.5 KB |
| 333 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_11.SLDPRT | 20.3 KB |
| 334 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_11.sldprt | 47 KB |
| 335 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_12.SLDPRT | 22.3 KB |
| 336 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_12.sldprt | 38.5 KB |
| 337 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_13.SLDPRT | 21.3 KB |
| 338 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_13.sldprt | 38.5 KB |
| 339 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_14.SLDPRT | 28.9 KB |
| 340 | inafag_ucp205_b74c4w4r8ia89acl3n6w5spuf_14.sldprt | 82.5 KB |
| 341 | m10bolt.SLDPRT | 78.7 KB |
| 342 | m10bolt.sldprt | 134 KB |
| 343 | m12 nylock nut.SLDASM | 33.7 KB |
| 344 | m12 nylock nut.sldasm | 24.5 KB |
| 345 | m12 nylock nut_2.SLDASM | 34.7 KB |
| 346 | m12 nylock nut_DATAKIT_210.sldasm | 25 KB |
| 347 | mat.SLDASM | 57.9 KB |
| 348 | mat.SLDPRT | 18.3 KB |
| 349 | mat.sldprt | 9.67 MB |
| 350 | mat_10.SLDPRT | 18.3 KB |
| 351 | mat_100.SLDPRT | 18.8 KB |
| 352 | mat_101.SLDPRT | 18.5 KB |
| 353 | mat_102.SLDPRT | 19 KB |
| 354 | mat_103.SLDPRT | 18.6 KB |
| 355 | mat_104.SLDPRT | 17.9 KB |
| 356 | mat_105.SLDPRT | 19 KB |
| 357 | mat_106.SLDPRT | 18.9 KB |
| 358 | mat_107.SLDPRT | 18 KB |
| 359 | mat_108.SLDPRT | 19.1 KB |
| 360 | mat_109.SLDPRT | 18.6 KB |
| 361 | mat_11.SLDPRT | 18.6 KB |
| 362 | mat_110.SLDPRT | 18.4 KB |
| 363 | mat_111.SLDPRT | 19 KB |
| 364 | mat_112.SLDPRT | 19.1 KB |
| 365 | mat_113.SLDPRT | 18.1 KB |
| 366 | mat_114.SLDPRT | 18.1 KB |
| 367 | mat_115.SLDPRT | 19.2 KB |
| 368 | mat_116.SLDPRT | 18.8 KB |
| 369 | mat_117.SLDPRT | 18 KB |
| 370 | mat_118.SLDPRT | 19.5 KB |
| 371 | mat_119.SLDPRT | 19 KB |
| 372 | mat_12.SLDPRT | 19.3 KB |
| 373 | mat_120.SLDPRT | 17.7 KB |
| 374 | mat_121.SLDPRT | 19 KB |
| 375 | mat_122.SLDPRT | 18.9 KB |
| 376 | mat_123.SLDPRT | 18.5 KB |
| 377 | mat_124.SLDPRT | 18 KB |
| 378 | mat_125.SLDPRT | 18.6 KB |
| 379 | mat_126.SLDPRT | 18.7 KB |
| 380 | mat_127.SLDPRT | 18.7 KB |
| 381 | mat_128.SLDPRT | 18.1 KB |
| 382 | mat_129.SLDPRT | 18.7 KB |
| 383 | mat_13.SLDPRT | 18.6 KB |
| 384 | mat_130.SLDPRT | 18.5 KB |
| 385 | mat_131.SLDPRT | 19.2 KB |
| 386 | mat_132.SLDPRT | 2.78 MB |
| 387 | mat_133.SLDPRT | 19.4 KB |
| 388 | mat_14.SLDPRT | 18.8 KB |
| 389 | mat_15.SLDPRT | 18.5 KB |
| 390 | mat_16.SLDPRT | 19 KB |
| 391 | mat_17.SLDPRT | 19.3 KB |
| 392 | mat_18.SLDPRT | 19.2 KB |
| 393 | mat_19.SLDPRT | 18.5 KB |
| 394 | mat_2.SLDPRT | 18.1 KB |
| 395 | mat_20.SLDPRT | 18.5 KB |
| 396 | mat_21.SLDPRT | 18.8 KB |
| 397 | mat_22.SLDPRT | 18.4 KB |
| 398 | mat_23.SLDPRT | 18.3 KB |
| 399 | mat_24.SLDPRT | 18.7 KB |
| 400 | mat_25.SLDPRT | 18 KB |
| 401 | mat_26.SLDPRT | 18.1 KB |
| 402 | mat_27.SLDPRT | 17.9 KB |
| 403 | mat_28.SLDPRT | 18.8 KB |
| 404 | mat_29.SLDPRT | 19.6 KB |
| 405 | mat_3.SLDPRT | 18.3 KB |
| 406 | mat_30.SLDPRT | 18.2 KB |
| 407 | mat_31.SLDPRT | 18.7 KB |
| 408 | mat_32.SLDPRT | 18.7 KB |
| 409 | mat_33.SLDPRT | 19.1 KB |
| 410 | mat_34.SLDPRT | 18.7 KB |
| 411 | mat_35.SLDPRT | 18.2 KB |
| 412 | mat_36.SLDPRT | 18.2 KB |
| 413 | mat_37.SLDPRT | 18.6 KB |
| 414 | mat_38.SLDPRT | 19.4 KB |
| 415 | mat_39.SLDPRT | 18.9 KB |
| 416 | mat_4.SLDPRT | 18 KB |
| 417 | mat_40.SLDPRT | 18.2 KB |
| 418 | mat_41.SLDPRT | 18.5 KB |
| 419 | mat_42.SLDPRT | 18.7 KB |
| 420 | mat_43.SLDPRT | 18.2 KB |
| 421 | mat_44.SLDPRT | 18.6 KB |
| 422 | mat_45.SLDPRT | 18.8 KB |
| 423 | mat_46.SLDPRT | 18.4 KB |
| 424 | mat_47.SLDPRT | 19 KB |
| 425 | mat_48.SLDPRT | 18.3 KB |
| 426 | mat_49.SLDPRT | 18.2 KB |
| 427 | mat_5.SLDPRT | 18.6 KB |
| 428 | mat_50.SLDPRT | 18.2 KB |
| 429 | mat_51.SLDPRT | 17.9 KB |
| 430 | mat_52.SLDPRT | 18.6 KB |
| 431 | mat_53.SLDPRT | 19.2 KB |
| 432 | mat_54.SLDPRT | 18.5 KB |
| 433 | mat_55.SLDPRT | 18.9 KB |
| 434 | mat_56.SLDPRT | 18.5 KB |
| 435 | mat_57.SLDPRT | 19 KB |
| 436 | mat_58.SLDPRT | 18.6 KB |
| 437 | mat_59.SLDPRT | 19.2 KB |
| 438 | mat_6.SLDPRT | 18.5 KB |
| 439 | mat_60.SLDPRT | 19 KB |
| 440 | mat_61.SLDPRT | 18.4 KB |
| 441 | mat_62.SLDPRT | 18.6 KB |
| 442 | mat_63.SLDPRT | 17.9 KB |
| 443 | mat_64.SLDPRT | 18.8 KB |
| 444 | mat_65.SLDPRT | 18.8 KB |
| 445 | mat_66.SLDPRT | 19.2 KB |
| 446 | mat_67.SLDPRT | 18.8 KB |
| 447 | mat_68.SLDPRT | 18.2 KB |
| 448 | mat_69.SLDPRT | 18.3 KB |
| 449 | mat_7.SLDPRT | 18.8 KB |
| 450 | mat_70.SLDPRT | 19 KB |
| 451 | mat_71.SLDPRT | 18.9 KB |
| 452 | mat_72.SLDPRT | 19 KB |
| 453 | mat_73.SLDPRT | 18.4 KB |
| 454 | mat_74.SLDPRT | 18.8 KB |
| 455 | mat_75.SLDPRT | 18.1 KB |
| 456 | mat_76.SLDPRT | 18.6 KB |
| 457 | mat_77.SLDPRT | 18.6 KB |
| 458 | mat_78.SLDPRT | 18.7 KB |
| 459 | mat_79.SLDPRT | 19.1 KB |
| 460 | mat_8.SLDPRT | 19.1 KB |
| 461 | mat_80.SLDPRT | 19.1 KB |
| 462 | mat_81.SLDPRT | 19.2 KB |
| 463 | mat_82.SLDPRT | 18.3 KB |
| 464 | mat_83.SLDPRT | 19.4 KB |
| 465 | mat_84.SLDPRT | 18.8 KB |
| 466 | mat_85.SLDPRT | 18.3 KB |
| 467 | mat_86.SLDPRT | 18.1 KB |
| 468 | mat_87.SLDPRT | 19.2 KB |
| 469 | mat_88.SLDPRT | 17.9 KB |
| 470 | mat_89.SLDPRT | 18.4 KB |
| 471 | mat_9.SLDPRT | 18 KB |
| 472 | mat_90.SLDPRT | 18.8 KB |
| 473 | mat_91.SLDPRT | 18.4 KB |
| 474 | mat_92.SLDPRT | 19.2 KB |
| 475 | mat_93.SLDPRT | 19.3 KB |
| 476 | mat_94.SLDPRT | 18.2 KB |
| 477 | mat_95.SLDPRT | 18 KB |
| 478 | mat_96.SLDPRT | 18.5 KB |
| 479 | mat_97.SLDPRT | 18 KB |
| 480 | mat_98.SLDPRT | 19.2 KB |
| 481 | mat_99.SLDPRT | 19 KB |
| 482 | modified gear box.SLDPRT | 56 KB |
| 483 | modified gear box.sldprt | 101 KB |
| 484 | outer link.SLDPRT | 23.8 KB |
| 485 | outer link.sldprt | 52.5 KB |
| 486 | paddy feeder pipe assembly.SLDASM | 37.1 KB |
| 487 | paddy feeder pipe assembly.sldasm | 34 KB |
| 488 | paddy feeder pipe assembly_2.SLDASM | 37.4 KB |
| 489 | paddy feeder pipe assembly_DATAKIT_476.sldasm | 34.5 KB |
| 490 | paddy head mounting bolt.SLDPRT | 280 KB |
| 491 | paddy head mounting bolt.sldprt | 315 KB |
| 492 | paddy seeder pipe.SLDPRT | 20.3 KB |
| 493 | paddy seeder pipe.sldprt | 41 KB |
| 494 | pipe1288.SLDPRT | 19.4 KB |
| 495 | pipe1288.sldprt | 29 KB |
| 496 | radial ball bearing_68_skf_SKF - 6002 - 12,DE,NC,12_68.SLDPRT | 66.3 KB |
| 497 | radial ball bearing_68_skf_SKF - 6002 - 12,DE,NC,12_68.sldprt | 224 KB |
| 498 | straight bevel gear_ai_Inch - Straight bevel gear 8DP 12GT 12PT 20PA 0.5FW ---12O20 mmH1MD0.375S1.SLDPRT | 96 KB |
| 499 | straight bevel gear_ai_Inch - Straight bevel gear 8DP 12GT 12PT 20PA 0.5FW ---12O20 mmH1MD0.375S1.sldprt | 235 KB |
| 500 | straight bevel pinion_ai_Inch - Straight bevel pinion 8DP40PT 12GT 20PA 1FW ---40O3.0H1MD1.0R1.SLDPRT | 250 KB |
| 501 | straight bevel pinion_ai_Inch - Straight bevel pinion 8DP40PT 12GT 20PA 1FW ---40O3.0H1MD1.0R1.sldprt | 566 KB |
| 502 | tapred pipe 5 degree_Default_As Machined_.SLDPRT | 25.5 KB |
| 503 | tapred pipe 5 degree_Default_As Machined_.sldprt | 51 KB |
| 504 | ucP205.SLDASM | 37 KB |
| 505 | ucP205.sldasm | 46.5 KB |
| 506 | ucP205_2.SLDASM | 37.7 KB |
| 507 | ucP205_DATAKIT_228.sldasm | 46.5 KB |
| 508 | upper fibre wheel.SLDPRT | 19.1 KB |
| 509 | upper fibre wheel.sldprt | 29 KB |
| 510 | vertical small pipe for frame roller.SLDPRT | 21.9 KB |
| 511 | vertical small pipe for frame roller.sldprt | 34 KB |
| 512 | yoke.SLDPRT | 47.1 KB |
| 513 | yoke.sldprt | 81.5 KB |
免责申明:
本网站模型由用户自行上传，如权利人发现存在误传其作品情形，请及时与本站联系。
立即下载
此图纸下载需要100金币
图纸ID：840119
文件大小：65.57M
软件版本：STEP,SOLIDWORKS
图纸格式：sldprt,sldasm,step
参数/编辑：可修改，包括参数
上传时间：2025-12-18
图纸介绍：
发布者
屿双网vzjm
作品: 2
粉丝: 0
提示
×
下载该图档需要消耗100金币！
确认下载
客服
签到
分享
